on 2040-cars

Auto blog

BMW mulled ten, eight, and six-cylinder engines for i8 before going hybrid

There's little doubt that the 2015 BMW i8 is one of the most radical and groundbreaking performance cars this industry has seen in a long time. From its unique carbon-intensive construction to its 1.5-liter, three-cylinder and electric motor plug-in powertrain to its concept-car appearance, the flagbearer for BMW's new i venture challenges the very notion of what it takes to be a supercar.
Yet apparently the i8 almost didn't do that at all. Yes, it probably still would've had innovative assembly techniques, serious performance and come-hither bodywork, but according to a new report in the Telegraaf, it was very nearly a much more conventional beast, drawing its power from a V10 engine. According to the report, that line of development never got much beyond the drawing board, but BMW engineers then shifted their focus to both V8 and six-cylinder motivation, going so far as to build prototype cars. The higher cylinder-count engines were eventually dropped altogether after BMW decided to turn the i8 into a hybrid, with the six-cylinder reportedly nixed due to heat management and weight issues. In the end, of course, BMW went with the PHEV powertrain that offers a total system output of 362 horsepower and 420 pound-feet of torque - plenty of thrust for this lightweight, all-wheel drive coupe while still enabling an incredible 94 miles to the gallon on the EU cycle. Regardless of how it turned out, it's still fascinating to think that BMW didn't have a much firmer conceptual idea of what it was after when it started the i8's development.
Here at Autoblog, we're genuinely thrilled about this new generation of greener hybrid super- and hypercars, a movement spearheaded by the i8, Porsche 918 Spyder, Ferrari LaFerrari and McLaren P1. But even so, our inner-gearheads can't help but wonder what might have been had BMW pursued a more conventional i8, either in place of, or in addition to, the car they did build. What do you think? Have your say in Comments.

BMW 6 Series Convertible gets a little work done for 2015

Truth be told, I've never really found the modern BMW 6 Series to be a particularly attractive car, in Coupe, Convertible, or sedan Gran Coupe forms. This current generation certainly looks a whole lot better than the Bangle-fied Six that came before it to my eyes, but on the whole, I find much of the car's design to be fussy and awkward. There's a new 6 Series on the way, scheduled to arrive sometime in 2017 or 2018, but to hold us over until then, BMW is freshening its current range, as evidenced by this convertible prototype our trusty spies recently caught testing.
Will the changes to the current 6 Series be an improvement? Perhaps. Up front, there are restyled headlamps and a new front bumper, and at the rear, BMW has redesigned the LED taillamps to bring them more in line with the rest of the company's offerings. Aside from those modest tweaks, we don't expect much more to change on the Big Six - the interior will likely carry over with some minor tweaks (or new colors), and it's possible the powertrains could be massaged gently for gains in either power, efficiency, or both.
Whether you think this new look is pretty or not, this freshened 6 Series will likely debut sometime next year, while BMW's engineers and designers craft the all-new version. See it from several angles in our gallery, above.

2015 BMW 4 Series convertibles recalled to fix airbag programming woes

A problem with the airbags on the 4 Series convertible has promoted BMW and the National Highway Traffic Safety Administration to issue a recall for some 2,000 vehicles across the United States. The issue, according to the notice below, relates to the driver's side front airbag, whose timing for deployment may be off. And if the airbag doesn't deploy at the right time in the event of a crash, that's more likely to result in an injury. As a result, BMW of North America is calling in 2,067 vehicles – specifically the 428i, 428i xDrive, 435i and 435i xDrive convertibles of the 2015 model year and manufactured between October 22, 2014, and February 27, 2015. Those units will simply need to have the software in the airbag control module reset, and will begin undertaking that process in April.Related Video: Report Receipt Date: MAR 13, 2015 NHTSA Campaign Number: 15V148000 Component(s): AIR BAGS Potential Number of Units Affected: 2,067 Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2015 428i Convertible, 428i xDrive Convertible, 435i Convertible, and 435i xDrive Convertible vehicles manufactured October 22, 2014, to February 27, 2015. Due to a programming error, the driver's front air bag deployment timing may be incorrect. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 208, "Occupant Crash Protection." CONSEQUENCE: If the driver's front air bag deployment timing is incorrect, there is an increased risk of personal injury in the event of a vehicle crash. REMEDY: BMW will notify owners, and dealers will reprogram the air bag control module with corrected software version, free of charge. The recall is expected to begin in April 2015. Owners may contact BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.