2011 Bmw 550i M Sport Premium 2 Convenience Cameras Highly Optioned Nr on 2040-cars

Auto blog

BMW recalling all 2000-06 3 Series models over airbags in US, 1.6M globally

We just can't seem to get away from recalls involving the faulty airbag inflators supplied by Takata. There are already millions of vehicles in need of repair as a result of these ever-expanding campaigns, and BMW is adding another 1.6 million worldwide. The Bavarian automaker is issuing a recall for certain 3 Series models, including 574,000 of them in the US, to replace the passenger-side, front airbag inflator.
Specifically, the campaign covers 3 Series models from the 2000 through 2006 model years built between May 1999 and August 2006. "It's only the E46" generation of cars that are affected, which are now two model revisions old, according to BMW of North America spokesperson Matt Russell, speaking to Autoblog.
These models suffer the same problem as the rest of the vehicles with the faulty inflators. It's possible for the part to rupture during airbag deployment and possibly spray shrapnel at the occupant. However, according to BMW, the automaker isn't aware of any actual cases of this happening in any of its vehicles.

Massive Airbag Recall Affects Seven Automakers

The recall of faulty airbag inflators supplied by Takata has exploded today to grow to seven automakers. In most cases, only models in certain high-humidity regions were affected because the National Highway Traffic Safety Administration found in its investigation that moisture played a role in determining whether there would be a problem. However, some companies opted for national campaigns. The exact number of affected models for these campaigns isn't yet known at this time. BMW is recalling an undisclosed number of 325i, 325Xi, 330i and 330Xi models from the 2001 through 2005 model years and the 2001-2006 model year versions of the 325Ci and 330Ci for the driver side and passenger side inflators. Only vehicles currently registered in Florida, Puerto Rico, Hawaii and the US Virgin Islands are covered under this recall. Neither Chrysler's filing with NHTSA nor its press release list the specific models affected, but a company spokesperson told Autoblog that at this time it only covers the driver and passenger side inflators for the 2006 Dodge Charger in Florida, Puerto Rico, Hawaii and the US Virgin Islands In most cases, only models in certain high-humidity regions were affected because the NHTSA found that moisture played a roll in determining if there would be a problem. Ford is recalling an estimated 58,669 cars that include the 2005-2006 model years of the Ford GT for the driver and passenger inflators, the 2007-2007 model years of the Mustang for the driver side and 2004 Ranger for the passenger side. It covers vehicles originally sold or currently registered in, wait for it... Florida, Puerto Rico, Hawaii and the US Virgin Islands. Honda is issuing three separate recalls regarding the problem. First, the company is recalling the 2002-2003 model years Civic, CR-V and Odyssey and the 2003 model year of the Accord, Element, Pilot and Acura MDX to replace the passenger's side inflator. This covers all models nationwide. Second, Honda is repairing the passenger's side airbag inflator in the 2003-2005 Accord, Civic, CR-V, Element, Pilot, the 2003-2004 model year versions of the Odyssey, the 2003-2005 model year Acura MDX and 2005 Acura RL. However, only for vehicles located in Alabama, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico and the US Virgin Islands. Owners will be notified in July. Finally, Honda is separately replacing some models' driver's side inflators.

BMW i3 called 'most revolutionary car' since Ford Model T

The Ultimate Driving Machine, or at least one of them, may also be the Ultimate Engineering Success. Consultant Munro & Associates, which specializes in automotive tear-down analysis, pretty much said as much when taking an under-the-skin look at the BMW i3 plug-in. In short, the firm liked what it saw. Presenting at Detroit's Plastic's in Automotive conference this week, Munro CEO Sandy Munro called BMW's first mast-produced plug-in model the most revolutionary car "since Henry Ford's Model T." The car earned big points for its substantial uses of materials that are both lightweight (key for any plug-in's range) and recyclable. BMW has touted these advantages all along. In late 2013, the German automaker went as far as saying its use of carbon fiber reinforced plastic (CFRP) would reduce customer costs related to both repair and insurance. The i3 went on sale in the US last May and, by the end of the year, moved more than 6,000 units here. It sold almost 17,800 The i3 last November also was named the Green Car of the Year at the Los Angeles Auto Show, beating out models such as the compressed-natural-gas-powered Chevrolet Impala B-Fuel and the Audi A3 TDI diesel. Munro made news earlier this week when it offered a free i3 for anyone who bought the master- or OEM-level version of the report, though the report isn't cheap and that offered disappeared once Munro made his presentation. Check out Munro & Associates' press release below. Munro Discusses Groundbreaking Technology Finds from BMW i3 Teardown at Plastics in Automotive Conference; Offers New BMW i3 for Purchasers of Master-level Report DETROIT, Jan. 14, 2015 /PRNewswire/ -- During today's Plastics in Automotive Conference in Detroit, Sandy Munro, CEO of Munro & Associates, Inc., discussed – for the first time publicly – his consulting firm's findings from its extensive deep-dive teardown, costing and benchmark study of the BMW i3 urban electric car. During his presentation, "Deconstructing the BMW i3: Groundbreaking Technology and the Composite Car," Munro discussed the carbon fiber life module, polymer components, recyclability and safety of what he considers to be "the most revolutionary car in terms of creative engineering and manufacturing since Henry Ford's Model T." During the presentation, Munro focused on four crucial aspects of the BMW i3: the manufacturing of its carbon fiber life module; its polymer components; recyclability; and safety.