2004 Bmw 325 Ci 1 Owner Low Miles, Convertible on 2040-cars

Auto blog

Audi S3 pitted against BMW M135i in track battle

Audi and BMW have long been enemies on both the road and the track, with their respective M and S/RS lines duking it out to the delight of auto enthusiasts everywhere. In this video from Evo, two of the rivalry's newest combatants take to the track - the Audi S3 and the BMW M135i.
The new Audi S3, which is finally coming to America, throws down with a 2.0-liter, turbocharged four-cylinder. 290 horsepower and 280 pound-feet of torque are deployed to a Quattro all-wheel-drive system via a six-speed, S-Tronic dual-clutch transmission, allowing the five-door Audi to scamper to 60 in under five seconds.
The BMW, which Americans will know as a long-roof version of the new M235i Coupe, comes to the track with 320 ponies and 331 lb-ft of torque. That's a good bit more than the Audi, but the M135i has only two wheels to send its power to, an eight-speed single-clutch automatic (a six-speed manual is available) and a slightly higher curb weight.

BMW recalls 6,073 units of i3 and Minis to replace airbag

BMW is replacing the passenger's side front airbag module on 6,073 vehicles in the US because of a supplier's manufacturing issue with the part. The affected models include the: 2014-2015 i3; 2014-2016 Mini Hardtop 2 Door Cooper and Cooper S; 2015-2016 Hardtop 2 Door John Cooper Works; and 2015-2016 Hardtop 4 Door Cooper and Cooper S. Because the airbag components aren't made correctly, they might not deploy with enough restraint in a low-speed collision. BMW isn't aware of any accidents or injuries from the problem, but this is still obviously a safety concern. According to company spokesperson David Buchko to Autoblog, customers will be notified about the issue by mail in November. As always, dealers will perform the replacements at no cost to owners. Related Video: RECALL Subject : Passenger Frontal Air Bag May not Deploy Properly Report Receipt Date: OCT 07, 2015 NHTSA Campaign Number: 15V628000 Component(s): AIR BAGS Potential Number of Units Affected: 6,073 All Products Associated with this Recall Vehicle Make Model Model Year(s) BMW I3 2014-2015 MINI COOPER 2014-2016 MINI COOPER S 2014-2016 MINI JOHN COOPER WORKS 2015-2016 Details Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2014-2016 MINI Cooper S and MINI Cooper two-door vehicles, 2015-2016 MINI John Cooper Works and MINI Cooper S and MINI Cooper four-door vehicles and 2014-2015 BMW i3 vehicles. Due to a manufacturing error, the passenger frontal air bag may not deploy properly in a low speed crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection." CONSEQUENCE: In the event of a vehicle crash, an air bag that does not deploy properly increases the risk of injury to the front seat passenger. REMEDY: MINI and BMW will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall is expected to begin on November 20, 2015. Owners may contact MINI customer service at 1-866-825-1525 and BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. BMW Statement: BMW has informed NHTSA of its intention to voluntarily recall approximately 923 BMW i3 vehicles to replace the passenger-side front airbag module.

BMW mulled ten, eight, and six-cylinder engines for i8 before going hybrid

There's little doubt that the 2015 BMW i8 is one of the most radical and groundbreaking performance cars this industry has seen in a long time. From its unique carbon-intensive construction to its 1.5-liter, three-cylinder and electric motor plug-in powertrain to its concept-car appearance, the flagbearer for BMW's new i venture challenges the very notion of what it takes to be a supercar.
Yet apparently the i8 almost didn't do that at all. Yes, it probably still would've had innovative assembly techniques, serious performance and come-hither bodywork, but according to a new report in the Telegraaf, it was very nearly a much more conventional beast, drawing its power from a V10 engine. According to the report, that line of development never got much beyond the drawing board, but BMW engineers then shifted their focus to both V8 and six-cylinder motivation, going so far as to build prototype cars. The higher cylinder-count engines were eventually dropped altogether after BMW decided to turn the i8 into a hybrid, with the six-cylinder reportedly nixed due to heat management and weight issues. In the end, of course, BMW went with the PHEV powertrain that offers a total system output of 362 horsepower and 420 pound-feet of torque - plenty of thrust for this lightweight, all-wheel drive coupe while still enabling an incredible 94 miles to the gallon on the EU cycle. Regardless of how it turned out, it's still fascinating to think that BMW didn't have a much firmer conceptual idea of what it was after when it started the i8's development.
Here at Autoblog, we're genuinely thrilled about this new generation of greener hybrid super- and hypercars, a movement spearheaded by the i8, Porsche 918 Spyder, Ferrari LaFerrari and McLaren P1. But even so, our inner-gearheads can't help but wonder what might have been had BMW pursued a more conventional i8, either in place of, or in addition to, the car they did build. What do you think? Have your say in Comments.