1976 Bmw 2002 California Blue Plate Original, Very Solid, No Reserve!! on 2040-cars

Auto blog

BMW looking to save billions with cost cuts

BMW is planning a fairly extensive overhaul in a bid to recoup some its annual costs, with CEO Norbert Reithofer (pictured above) aiming to save three to four billion euro ($4 to $5.4 billion) per year to help keep the company's profit margins between eight and 10 percent, while also maintaining investments in production expansion and new tech. BMW's profit margins sat at 9.4 percent in 2013.
According to Automotive News Europe, Reithofer is none too pleased about costs at Mini and on the 1 Series, although neither AN nor its source story, from Germany's Manager Magazin, elaborate on what steps could be taken to improve losses on either project. That makes it hard to figure out just where the fat will be trimmed from.
What may happen, though, is that BMW attempts to trim 100 million euros ($135 million) from its German labor costs each year; a solution hinted at a few weeks ago by Germany newspaper Muenchner Merkur. While a dramatic cost reduction, 100 million euros still doesn't begin to even approach the savings envisioned by Reithofer.

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.

BMW to change model designations, further yet from actual displacement?

Once upon a time, you could look at the back of a trunk lid of a BMW and come up with a pretty fair idea of what sat under its hood. For example, a 320i was a 3 Series with a fuel-injected, 2.0-liter engine, a 328i was a 3 Series with a fuel-injected, 2.8-liter engine and a 328Ci was a two-door 3 Series with the same engine. Those were good days.
Today, though, that simplicity is dead and gone. A 328i now has a 2.0-liter engine, just like the 320i, while the simple "C" designation that was affixed to two-door models has been replaced with a "4," so we have a 428i and a 435i. It gets worse, though. A 550i uses a 4.4-liter, twin-turbocharged V8 (it should be a 544ti, although we'd be willing to hear an argument for "tti") and a 740i uses a 3.0-liter, turbocharged six-cylinder, which is the same engine found in a 535i. It's madness.
And, well, it's about to get madder, if a post on a BMW enthusiast forum is to be believed. According to f30post.com, we could see a shakeup in at least the 3 and 4 Series nomenclature, thanks to an impending refresh that will see the addition of new, turbocharged four- and six-cylinder engines, codenamed B48 and B58, respectively.