1975 Bmw 2002 Drag Car. Prostreet, Tube Chassis. 406 Sbc on 2040-cars
Newark, Delaware, United States
Engine:2.0L 1990CC 121Cu. In. l4 GAS SOHC Naturally Aspirated
Transmission:Automatic
Vehicle Title:Clear
For Sale By:Private Seller
Body Type:Coupe
Make: BMW
Mileage: 999,999
Model: 2002
Exterior Color: White
Trim: Base Coupe 2-Door
Interior Color: Black
Drive Type: RWD
Number of Cylinders: 4
**VIDEO** http://www.youtube.com/watch?v=xiI-Lc8fxjM
I have a 1975 BMW Drag car/ Prostreet car. This car was built from the ground up in 2001 (have build pictures) and has sat for a little while. It is a complete tube chassis build, with pictures to provide from the entire build. This car was built right but could use a bit of work from sitting. It needs a few minor things to bring it back to its former glory and to be street legal again. It has a cracked windshield, the speedo doesn't work, no horn, and the windshield wipers don't work. Other than that, this is a street legal car, has all lights, turn signals, exhaust.
Here is more information on the car:
1975 BMW 2002
No expenses was spared with the building of this car. This BMW was built properly from the ground up.
406 Small Block Chevy
350 rods with 400 Crank
10:1 flat top pistons
Ported heads 2.02" intake/1.60" exhaust
Variable lifters
Crane Cam 232/244 duration with .488 lift @ .05"
Tunnel ram intake with dual Holley 450CFM double pumpers w/o choke
Electric water pump
Custom full length headers with Magnaflow dual exhaust out the back, SS tips
Aluminum radiator with electric shrouded fan
MSD 6AL system with MDS Billet distributor with on-dash timing control and on-dash rev limit
Turbo 400 TCI manual/automatic transmission with 3500 RPM stall torque converter
Narrowed Ford 9" rear end with 4:10 gears, Detroit locker and 31 spine axles
Competition Engineering ladder bar rear suspension with adjustable coil over shocks
Mickey Thompson 12.5 x 15.5 x 29.5 rears and Nitto's on front all on Cragger Street Stars.
Custom front strut suspension with 4 piston calipers and vented rotors
Fuel cell, manual fuel pump, rear mount battery with console shutoff
The car has a custom fiberglass wide-body, custom split hood, and custom rear deck lid.
Custom tubular frame, 6 point roll cage and 5 point racing harnesses.
Originally dash and door panels are in great shape. I also have numerous other boxes of interior parts that come along with the car.
It has a 1x2 thin wall matrix of brace tubes throughout (from firewall to rear panel) and 1 x 3 heavy wall main rails from the rear suspension to under motor mounts.
The car has a clear clean title and is currently registered as a 1975 BMW 2002. All headlights, brake lights, and turn signals function.This is a ground pounding very intense street rod!!!!. It was completed in 2001 and got into a couple of magazines.
BMW 2002 for Sale
- 1973 bmw 2002tii, 5-speed, fuel injected, fully restored
- Bmw 2002
- 1974 bmw 2002(US $14,000.00)
- Widebody, coilovers, korman, 5 speed, twin webers, one of a kind!
- Californiaclassix 1-owner 1975 bmw 2002 sunroof with air conditioning. {59 pix}
- 1974 bmw 2002tii sunroof rust free chamonix white new interior gorgeous must see(US $19,750.00)
Auto Services in Delaware
Xtreme-steam ★★★★★
Townsend Brothers Chevrolet ★★★★★
Norco Auto Salvage ★★★★★
Inside Out Car Care ★★★★★
East Coast Towing LLC ★★★★★
Cropper`s Inc ★★★★★
Auto blog
BMW 4 Series Gran Coupe caught again
Tue, 02 Apr 2013It's been a while since we've seen the upcoming BMW 4 Series Gran Coupe out testing, but we're sort of inclined to ask "Why?" yet again. After all, the 4 Series is what the new 3 Series-based coupes and convertibles will be called, so the idea of another four-door version just sort of seems redundant. In other words, just how different will a 4 Series Gran Coupe be from a 3 Series sedan, aside from perhaps a more rakish roofline or a four-passenger seating configuration? Probably not much, but BMW clearly thinks it can use the additional bodystyle to rake in some extra profits.
Anyway, back to these spy shots. No more of the 4GC's skin has been revealed since the last time we saw it, but we fully expect it to share a lot of its design DNA with the 3 Series sedan, not to mention the attractive 4 Series coupe concept that bowed at this year's Detroit Auto Show.
Powertrain options should carry over direct from the 3 Series line, so we expect to see 428i and 435i models on hand, packing turbocharged four- and six-cylinder engines, respectively. We're sure that BMW's xDrive all-wheel drive will be available, and who knows, we could even get a 428d version with the new 2.0-liter turbodiesel four that debuted in the 328d at the New York Auto Show last week, or even an M4 variant.
BMW M4 Convertible poised for Goodwood unveil
Sat, 22 Mar 2014It shouldn't be a shock that BMW is working on a convertible version of the M4. Not only have we caught it testing twice, but this is an automaker that seems willing to build a vehicle for nearly every buyer's needs. Evo claims that the high-performance droptop is going to debut at this year's Goodwood Festival of Speed in England from June 26-29.
Judging from the spy shots we've seen, the M4 Convertible will consist of a retractable hard top like the 4 Series cabrio. Other than the roof, there aren't expected to be many changes from the coupe. The engine will be the same turbocharged, 3.0-liter inline six-cylinder engine, but the added weight of the roof and its mechanism may take a small bite out of performance.
We spoke to BMW USA about the rumor and were told that it has no comment at this time. After the M4 Convertible, Evo claims that BMW is working on a M4 Gran Coupe. How that would be all that different from an M3, isn't exactly clear.
Car dealers, factories and ports close in the path of Hurricane Florence
Thu, Sep 13 2018Hurricane Florence has caused CarMax to close four stores in North Carolina, South Carolina and Virginia. The closed locations are in Myrtle Beach, Charleston, Winterville and Virginia Beach. It is possible for the company to close more stores, reports Automotive News. Daimler and Volvo have also shuttered their manufacturing facilities in the region to prepare for Florence. The storm is expected to reach North Carolina and South Carolina today or tomorrow. Automotive News says every coastal car dealer it reached on Tuesday was closing, and others not in the projected landfall area were monitoring the situation. There are approximately nine million vehicles in operation in the area that Florence is expected to hit, with a vehicle density of 162 vehicles per square mile. It is likely that not as many vehicles will be lost as during hurricanes Harvey and Irma, as population is less dense; areas affected by those storms had over 300 vehicles per square mile. The chief economist of Cox Automotive told Automotive News that some 20,000 to 40,000 vehicles could end up flooded if Florence keeps its path; however, recent reports have indicated Florence has weakened to a category 2 hurricane on Thursday. Tesla has again unlocked more range for some of its older models to make evacuation easier; the same was done a year ago in preparation for Hurricane Irma. As well as automotive manufacturers and dealers, automotive transport providers are readying for the storm and clearing cargo away. The container and auto terminals at Port Charleston will be closed from Thursday to Saturday, affecting part shipments to the BMW manufacturing facility in Spartanburg; BMW's spokespersons have said no production disruption is expected. Parts are delivered via railroad to Spartanburg by Norfolk Southern, which is also suspending operations for the time being. Vehicle hauler United Road has moved its rigs to safer regions and suspended deliveries, and car carrier vessels are trying to make it away from the storm's path in time. Related Video: News Source: Automotive NewsImage Credit: NASA via Reuters Auto News Plants/Manufacturing BMW Mercedes-Benz Volvo Car Buying