2009 Bmw 1-series I on 2040-cars

Auto blog

BMW 2 Series caught uncovered during shoot

Before we know it, the BMW 1 Series will be no more in the United States. Well, sort of. The current six-year-old coupe and convertible will be replaced by the fancy new 2 Series you see here, spotted completely uncovered during a photo shoot, with the 1 Series nomenclature being reserved for the hatchback and GT models that might not ever make it Stateside.
The roofline of the new 2 Series doesn't appear to have to changed all that much from the current 1 Series coupe, but the front and rear fascias have indeed been smoothed out. (Truth time: As much as your author adores the 1 Series, he's always found its rear end to be, well, weird.) It looks good, seen here in M235i guise, with large wheels, slimmer headlamps and large air intakes on either side of the front fascia.
The 2 Series is expected to come to the States, likely in M235i and 228i variants, though rumors suggest that we won't get a non-M 235i model. The M235i is expected to be powered by the N55 turbocharged inline-six that we currently enjoy in the 335i sedan, producing something like 320 horsepower. The 228i, unsurprisingly, should use the 2.0-liter turbo-four from the 328i, making around 240 hp. Both engines will almost certainly employ eight-speed automatic transmissions and six-speed manuals.

BMW recalls over 76k 2012-2014 models over brake failure

Bimmerfest is reporting that BMW has notified the National Highway Traffic Safety Administration of its intention to voluntarily recall more than 75,000 3 Series, 5 Series, X1, X3 and Z4 models due to a possible loss of power brake assist that could result in the vehicles failing to stop. The recall affects 2012-2014 models equipped with either the N20 or N26 engine produced from May 2012 to August 2013. Until recall repairs have been performed, BMW dealers will discontinue selling or delivering any affected vehicles in their inventories.
The problem has been traced to restricted oil supply from the intake camshaft to the brake vacuum pump, which may cause the brake vacuum pump to fail, resulting in a loss of power brake assist. While the hydraulic brakes will still function, the driver must much apply greater pedal pressure and the distance required to stop the vehicle will increase.
BMW has reported three minor accidents with no confirmed injuries. According to Bimmerfest, drivers who encounter a braking problem should "pull the emergency brake and apply as much brake pedal pressure as possible. If your BMW has an electronic parking brake pull up and hold the switch to engage the brake." Drivers should then park in a safe location and contact BMW Roadside Assistance.

2013 Dinan S3 BMW 550i

Steve Dinan has been enhancing BMW models since 1979. But don't throw his company into the ring with the dozen or so other tuners who tweak, tinker and piggyback upgrades on the famed German marque. Dinan is a tuner, but it's also an engineering firm that writes its own software, builds its own parts and then backs everything it does with a factory-grade warranty. That sort of fastidiousness comes at a price, but most of its customers - including the powerhouse of BMW Motorsport - rely on Dinan to help them come out on top.
In stock form, BMW's 550i is a formidable four-door with a twin-turbocharged 4.4-liter V8 rated at 400 horsepower and 450 pound-feet of torque. While those figures allow it to run with quick company (0-60 in 5.0 seconds, according to the automaker), Dinan puts the sedan's kettle on full boil with its S3 package. Starting with the engine, the performance engineering firm bolts on larger turbochargers, air-to-water intercoolers, a trick strut tower brace cold air intake, a quad-pipe free flow exhaust and its own engine management software. Pump in some premium fuel, and the result is 542 horsepower and 587 pound-feet of torque. Power is sent through the stock eight-speed automatic to a limited slip rear differential (Dinan will upgrade xDrive all-wheel drive models, too).
The Dinan S3 also features and extensive suspension upgrade that includes new front camber arms and low compliance rear control arms (engineered to reduce understeer and improve turn-in). The stock dampers are retained, but new bump stops are installed along with new springs. Overall, the car rides about a half-inch lower than stock to improve roll rate. To reduce unsprung weight, forged 20-inch HRE Performance wheels are fitted at all four corners (wearing Michelin Pilot Super Sport tires - 275/35ZR20 up front and 295/35ZR20 in the rear). Lastly, the company remaps the factory Electronic Damper Control (EDC) software with its own Dinan Shockware to work in conjunction with the new enhancements.