128i 1 Series Low Miles 2 Dr Convertible Automatic Gasoline 3.0-liter Dual Overh on 2040-cars

Auto blog

Alpina B4 coupe will be your subtle M4

We're big fans of Alpina here at Autoblog - the BMW tuner has created some seriously delicious products in the past, and recently tuned the diesel-powered 3 Series wagon to create the D3 Bi-Turbo. What we like most about Alpina is how the cars only look subtly more aggressive than stock, yet they pack a real wallop under the hood.
Take this B4 Coupe, recently spotted testing at the Nürburgring. It looks pretty tame compared to the normal 435i, the only visual additions being the Alpina-standard 21-spoke wheels, modified front lip and rear wing spoiler. But under the hood, Alpina is reportedly working on a tuned, twin-turbo straight-six that produces something like 410 horsepower. That means the B4 should be good for a 0-62 time of 4.2 seconds, with a top speed around 190 mph. Rear-wheel drive will be standard, though our spies suggest that Alpina could also use all-wheel drive here in the B4.
We have no doubt that the next BMW M4 will be super hot, but for those seeking a bit more stealth and exclusivity, this Alpina B4 certainly looks the business. Check it out in our gallery above.

2014 BMW 4 Series Coupe officially debuts, priced from $41,425*

Well, that didn't take long. Less than two hours after the first images of the 2014 BMW 4 Series Coupe leaked onto the Internet, we've been given the go-ahead to publish the whole kit and caboodle. And while we won't say we told you so, it looks as though the car's official details are standing true to our earlier predictions.
In other words, BMW will offer the 4 Series in 428i and 435i models, both of which can be had with xDrive all-wheel drive. Just like in the 3 Series, the 428i is powered by a 2.0-liter turbocharged inline four-cylinder engine, good for 240 horsepower and 255 pound-feet of torque, and the 435i gets BMW's turbocharged 3.0-liter inline-six making 300 hp and 300 lb-ft. In three of the four models, both a six-speed manual and eight-speed automatic transmission are available; the 428i xDrive can only be had with the auto 'box. The 428i (with rear-wheel drive, we assume) can hit 60 miles per hour in 5.7 seconds (though BMW doesn't specify with which transmission), and the 435i will do that same sprint in 5.3 seconds with the manual and five seconds flat with the eight-speed auto.
We've already dissected the 4 Series' visuals, but the numbers show just how different it is from the 3 Series sedan. The 4 Coupe is one-tenth of an inch longer overall, while riding on the same 110.6-inch wheelbase, is 0.6 inches wider, and has a roofline that's a full 2.7 inches closer to the ground. It looks sleek, incorporating BMW's new design language from the 3 Series with an overall profile that's similar to the larger 6 Series coupe.

BMW X4 reclaims dash of utility with Clemson student project [w/videos]

BMW seems willing to exploit every automotive niche it can find with creations like the four-door, 'crossover coupe' X4 and X6. Of course, these designs come with a compromise. That svelte fastback means that they just can't haul as much cargo as a more traditional, boxier hatchback. Fortunately, students at Clemson University's International Center for Automotive Research might have a novel solution: the engineering graduate program has turned the crossover into a unique pickup.
Dubbed Deep Orange 4 concept, this functional prototype has an enclosed cargo area with a sliding glass panel that opens up to expose a pickup bed if more room is needed. Think of it as the GMC Envoy XUV of German crossovers. This isn't just an X4 with its roof hacked off, though. The students actually started with an X3 and grafted on this top later in addition to the two barn doors for access to the bed.
To make this project even more impressive, this pickup-crossover could conceivably be produced. The graduate students conducted an in-plant analysis of BMW's manufacturing abilities and went back to the university to create a plan for a low-volume vehicle that could actually be built. "The students working on this phase of the project did an excellent job of keeping costs down while finding optimal integration opportunities," said Rich Morris, vice president of assembly at BMW Manufacturing, in the university's release.