2010 Bentley Gt Coupe Series 51 Certified W/ 5k Miles on 2040-cars

Auto blog

First new Bentley Blower built since 1930 is now being tested

Just over a year after announcing the program, Bentley has finished building its first Blower car since 1930. It's called "Car Zero" since it's not one of the 12 customer cars. Instead, this first car is a prototype that will undergo testing before the customer cars begin production. Bentley says this car took 40,000 hours to complete. The company figured out how to build it based on existing tooling and blueprints, as well as laser scans of the components in the company's 1929 race car on which the continuation models will be based. The company collaborated with a variety of outside companies for help with the frame, radiator shroud and leaf springs. The frame was built by a company that builds and restores boilers for steam engines. Bentley itself also built a custom stand so it could hook up the recreated 4.5-liter supercharged four-cylinder to its modern-day engine dynamometers for break-in. Now that this prototype has been completed, Bentley will begin testing it for durability. The planned testing should recreate just under 22,000 miles of regular driving and nearly 5,000 miles of track driving. The company will also do a top speed run with it. Once testing is complete, Bentley will start building the 12 customer cars, all of which have been sold and specified. While many are likely excited about this new Bentley, there are a handful of car enthusiasts that probably don't share the excitement. Earlier this year, several of these wealthy enthusiasts, including fashion mogul Ralph Lauren, sent a letter to Bentley expressing concerns that these continuation cars will reduce the value, both monetary and intrinsic, of the original cars. The complaint obviously hasn't had an effect on Bentley's plans. Related Video:

Bentley builds its final 6.75-liter V8, ending a 61-year production run

Bentley has just finished its very last 6.75-liter V8. While engines come and go, this is significant because Bentley has been building this engine, known as the L-series, for 61 years. This final engine will go in the 30th and last Bentley Mulsanne, a 6.75 Edition by Mulliner, marking the end of the flagship sedan. The L-series engine was first introduced in 1959, and according to Bentley, it was developed in order to develop more power than its existing inline-six without adding weight or taking up more space. The engine in fact weighed 30 pounds less than the six-cylinder, and it made about 180 horsepower. That original engine "only" had 6.2-liters of displacement, and it wasn't until 1971 that it would reach 6.75 liters thanks to increased stroke. This final version of the engine is significantly different from its fuel injection to its twin-turbochargers, but is based on the same design. And with 530 horsepower and 811 pound-feet of torque, it's the most powerful iteration of the engine. At 61 years, the Bentley engine is arguably the V8 with the longest production run. While the first-generation Chevy small block V8 was introduced earlier for the 1955 model year and is still built in crate engine form, GM stopped using it in production cars in 2002. Far fewer Bentley engines were built, though, with a total over 36,000, as opposed to the millions of Chevy small blocks in the world. Of course, volume is sort of the antithesis of what makes a Bentley a Bentley. With the 6.75-liter engine out of production, all of Bentley's engines are derived from VW Group engines, from its W12 to the plug-in hybrid V6. Related Video:    

2021 Bentley Bentayga V8 First Drive | Not messing with success

The 2021 Bentley Bentayga V8 marks the first refresh for Bentley’s first and rather successful SUV. The company has sold more than 20,000 of them worldwide since its introduction just a few years ago. As such, Bentley didnÂ’t need to do much to keep it updated, nor did it. The refresh boils down to exterior and interior updates, and after spending some time with the updated Bentayga, it continues to be a brilliantly luxurious machine with impressive capability. The most obvious and significant changes are to the exterior styling, which has hardly been the Bentayga's strong point. There are new round headlights with a cut crystal design like on other recent Bentleys. The grille has been enlarged, and the front bumper has a sportier design with an integrated spoiler. On the side, the fender vent has been lengthened and mounted higher, while the rear now has slim oval taillights and oval exhaust outlets. Those taillights have the same kind of cut crystal design as the headlights. The changes are subtle but effective at sprucing up the Bentayga, but they also donÂ’t make existing Bentaygas look out of date. ItÂ’s a similar situation inside. The biggest changes are in the center of the dashboard. The upper air vents are thin and horizontal instead of circles, and they've been relocated with the dash clock to sit mostly on top of the dash instead of nestled into it. Below them is a larger, 10.9-inch infotainment system that spans the whole width of the center stack and looks better integrated than the old version. The back seats can be configured to have nearly 4 inches more legroom, and thereÂ’s a larger touchscreen remote and available rear air vents for the bench seat configuration. Beyond that, the interior is mostly the same, which is hardly a complaint. This is a Bentley, after all. Essentially every surface is wrapped in soft leather, adorned with rich wood trim or made of weighty knurled metal. And customers have access to a vast variety of colors and combinations to create a genuinely custom cabin. There are a few low-ish points. The infotainment system isnÂ’t the most responsive, and it can be a little tricky to find the menu you want. Also, and this is a bit of a car journalist nitpick, you can spot some bits pilfered from the Audi parts bin: the turn signal and washer stalks, the headlight knob, and the underlying menus and layout of the instrument panel.