2006 Bentley Continental Gt Flying Spur on 2040-cars

Auto blog

New Bentley interior veneer sourced from American Red Gum trees

Bentley is turning stateside for its newest exclusive wood interior finish, sourcing its first new veneer in five years from American Red Gum trees found in Mississippi wetlands. Bentley calls the new veneer Liquid Amber, a reference to the wood's perfumed scent. The red-hued wood undergoes a weeks-long natural smoking process to deepen its brown luster. Afterward, the veneer is then transported to Bentley's wood shop in Crewe, England, where it's examined alongside the six other types of veneers harvested from China to Canada to determine suitability, based on a high-burr density, minimal sapwood and a lack of bark growth or structural defects. Bentley says it rejects between 30 percent and 70 percent of all veneers offered. Raw veneer is then cut to a precise 0.6-millimeter and tested for stability in UV light and consistency from tree to tree. The whole process takes at least 18 months before the veneer is installed in one of Bentley's vehicles, which start at $189,000 for the Flying Spur sedan. Also known as the Sweetgum tree, the American Red Gum is native to lowland areas of the southeastern United States. It was once used commercially for soaps, adhesives and pharmaceuticals but is valued today primarily for use in furniture, cabinetry and interior finishing. Bentley says it harvests the trees only twice a year due to restricted access to the wetlands where it sources the wood. Bentley also announced it has begun using slate and quartzite stone veneers sourced from select quarries in India. They're split from a larger stone piece, cured using fiberglass and a bespoke resin, and shaped and finished by hand by the Mulliner coach building team in Crewe.Related Video: Featured Gallery Bentley wood finish Image Credit: Bentley Bentley Luxury bentley flying spur

Bentley plotting rear-drive Continental GT3-R?

Coupe, convertible or Flying Spur sedan: no matter what body-style you get, or what engine you specify, the Bentley Continental comes with all-wheel drive. It's been that way since the model line was first introduced a dozen years ago. But that looks poised to change... at least for one notable exception. According to Autocar, Bentley is all but certain to launch a rear-drive version of the Continental GT3-R sometime next year, ditching the front half of the drivetrain to cut a good 440 pounds off the curb weight to make it the lightest Conti yet. The Continental GT3-R launched last year with less weight and more power, along with a stiffer suspension, upgraded brakes and a titanium exhaust. It drew its inspiration from the Continental GT3 racer, but unlike the competition version, kept the AWD drivetrain in place. "A lot of people expected the GT3-R to be a proper rear-wheel-drive sports car," Bentley's chief engineer Rolf Frech said to Autocar, "but the problem was timing. We needed the car at the end of the first season of our GT3 racing car, and to do a proper change of the complete powertrain needed longer than we had. But we have the concept in our mind, so why not?" Denuded of its all-wheel drive, the Conti GT3-RS – assuming Porsche doesn't mind lending the name to its sister company – would be the most hardcore version of the go-to luxury coupe, and would promise to cut its already blitzkreig 3.6-second 0-60 time down even further. Especially if the 4.0-liter twin-turbo V8 were tuned to deliver even more than the 572 horsepower and 516 pound-feet of torque it already kicks out in the existing GT3-R. Chances are it'd be even less accessible, though: the 99 examples of the Conti GT3-R that are coming to the States out of the 300 total to be made already carry a $337k sticker price, and the rear-drive model would likely push the production:price see-saw even higher to the right.

2021 Bentley Flying Spur Speed spied undisguised, may be PHEV

The 2020 Bentley Flying Spur luxury sedan was just revealed a few months ago, but its high-performance Speed variant should be launching very soon. One of our spy photographers caught what appears to be a Flying Spur Speed completely undisguised. It follows the pattern of past Speed models in terms of style, but it may be powered by a hybrid powertrain, which would be a first for the Speed line. When it comes to the design, the Flying Spur Speed is quite subtle. The body is pretty much untouched except for the black mesh grilles. All the chrome trim has been changed over to gloss black as well, just as previous Speed models have done. At the back, the car now features quad exhaust tips that exit through the oval outlets in the bumper. The exterior also leads us to believe this is a hybrid. Looking closely at the back, you can see the factory fuel filler door nestled in the top of the right rear fender. Looking over to the left rear fender, you can just make out yet another small filler door ahead of the taillight. This door doesn't appear on the regular Flying Spur, so we believe it's an electric charger port door. The question is, what hybrid powertrain could it be using? It's likely not using the V6 hybrid from the Bentayga, since we've established that this is a Flying Spur Speed, but Bentley doesn't have any other plug-in hybrid powertrains at the moment. It's possible it could use a version of the Porsche Panamera Turbo S E-Hybrid V8 powertrain, which makes 677 horsepower and 626 pound-feet of torque. That would be more power than the regular Flying Spur's W12, if a bit less torque. And of course Bentley could probably tweak it for a bit more power. Then again, maybe Bentley will adapt some hybrid tech to its W12. Whatever the case may be, this should be a very interesting car. And since this is just a high-performance variant that's clearly pretty far in development, we should see it officially revealed soon. It would make sense for it to be launched for the 2021 model year and shown within a year.