on 2040-cars

Auto blog

New Bentley Flying Spur will be first Bentley with four-wheel steering

We just got a bundle of details about the new Bentley Flying Spur. Among them is, finally, an official reveal date of June 11. Besides that, the Flying Spur features the latest driving technologies from other current Bentleys, as well as a first for the brand. The company revealed that the luxury sedan will be the first Bentley to get four-wheel steering. It will operate similarly to other systems from other brands, in which the rear wheels will turn slightly in the opposite direction of the front wheels at low speed for maneuverability, and at high speed the rear wheels will turn slightly with the front wheels for extra stability. The Flying Spur also picks up features from other current Bentleys. It gets an all-wheel-drive system that now sends all its power to the rear wheels unless the front wheels start to slip. It will also have the Bentley Dynamic Ride suspension that includes anti-roll bars that are constantly adjusted via a 48-volt electrical system. And of course we get a little visual teaser of the car with a video. It seems to confirm the slightly more blunt look predicted by an earlier teaser. Stay tuned for the full reveal in a couple of weeks.

Bentley will build 1929 Team Blower continuation series of 12 cars

Bentley considers Sir Tim Birkin’s supercharged 4 1/2 -liter Team Blower race car to be the company's "most revered heritage car" ever. So revered, in fact, that Bentley wants to make the car again, 12 times over. With the help of some reverse engineering by Mulliner, Bentley has announced its intentions for an extremely special continuation series limited to only a dozen examples built nearly identical to the original.  Through various methods, Bentley has been celebrating its heritage all throughout 2019, the centenary of the brand's founding. Just in the summer months, Bentley released the third-gen Flying Spur, unveiled the EXP 100 GT autonomous electric concept, built a Continental GT convertible that honors the 1929 Blower Number 1, won Best of Show at the Pebble Beach Concours, and re-created 1939 Corniche sedan with the help of Mulliner. That last achievement is particularly relevant, as Mulliner typically crafts bespoke new cars, as opposed to building old ones. After successfully bringing the Corniche into the 21st century, however, Bentley is confident Mulliner can take on the complex task of rebuilding the legendary Team Blower.  Bentley claims this will be the world's first continuation of a pre-war race car, and the original production run didn't even make it to double digits. Only four Team Blowers were built for Birkin and the boys to race, which they did at Le Mans and all over Europe. Bentley is building 12 re-creations because that's how many races the original cars competed in. In order to take this project on, Bentley will disassemble Team Blower chassis No. HB 3404 down to its nuts and bolts. The parts will all be cataloged and 3D scanning of each individual piece will create the foundation for the new cars. Bentley will then combine use of the original 1920s molds and tooling jigs with modern manufacturing methods to create 12 identical sets of parts. The new cars will be as close to identical to the original car as possible, but current safety regulations will force Bentley to make a few changes and alterations. Under the hood, the Continuation Series cars will have 16-valve four-cylinder engines with aluminum crankcases, cast-iron cylinder liners, and non-detachable cast-iron cylinder heads. With the help of Amherst Villiers Mk IV roots-type supercharger replicas, the 4,398 cc engines will be rated at 240 bhp at 4,200 rpm.

Bentley resumes restoration of the first T-Series sedan

Bentley has shifted one of its on-going restoration projects into high gear. Found after spending decades undriven, the first T-Series sedan built is being brought back to life by the British company's apprentices and specialists and it should be back on the road by the end of 2023. Manufactured on September 28, 1965, about a week before the model's official unveiling at that year's Paris auto show, the oldest T-Series was finished in Shell Gray with a blue interior. Bentley initially kept the car and used it as a test mule around the world. The big sedan later ended up in private hands with a blue California plate and a "Beverly Hills Motor Cars" plate frame attached to its rear end. It was last registered in 2015, according to the sticker on the plate, though Bentley notes that it has spent decades off the road and in storage. Bentley bought the car and shipped it back to its headquarters in England. It started tearing down the sedan in October 2016: A group of apprentices removed the exterior trim and began preparing the body for new paint, but the project stalled. See, this happens even to luxury carmakers — don't feel bad about the Fox-generation Mustang lingering in the back of your garage. For collectors, projects tend to get delayed when, for better or worse, life happens. Bentley ran into different hurdles: It put the T-Series on the backburner to launch its current range of models, including the Flying Spur and the Continental GT. Nearly six year later, the firm is returning to the garage to wrap things up. It sounds like the T-Series was stored indoors, and being out of the elements might be its saving grace. Mechanics managed to fire up the 6.2-liter, 225-horsepower V8 engine, and they gave it a clean bill of health; the automatic transmission is in good condition as well. There is still some body work that needs to be completed and the interior is almost completely taken apart. Bentley estimates that the project will take approximately 18 months, so it should be finished by late 2023, and it plans to add the car to its Heritage Collection when it's done.  While it's a relatively obscure classic in 2022, the T-Series remains a hugely important part of Bentley's heritage.