Fully Serviced on 2040-cars

Auto blog

2014 Bentley Flying Spur brings new design to four-door Continental

After showing us a couple teasers recently, not to mention the leakage of official shots earlier today, Bentley has finally pulled the cover off the all-new 2014 Flying Spur, which will receive its global debut next month at the 2013 Geneva Motor Show. The big, bespoke sedan not only promises plenty of luxury in its full redesign, but Bentley is also saying that the new Flying Spur will be the "fastest, most powerful four-door" model it has ever produced.
To make sure it comes through on that bold statement, the 2014 Flying Spur is powered by the same twin-turbocharged 6.0-liter W12 engine used in the Continental GT Speed. In the Flying Spur, this 12-cylinder engine produces 616 horsepower and 590 pound-feet of torque, and it sends that power to the ground through a new eight-speed automatic transmission and a rear-biased (40/60) all-wheel-drive system. Launching the 5,451-pound sedan from 0-60 miles per hour will take just 4.3 seconds and 100 mph comes in less than 10 seconds; overall top speed is rated at 200 mph. Even with all that power and mass, Bentley is still expecting the next-generation Flying Spur to return better EPA fuel economy than the current model with projected (but not certified) estimates of 12 miles per gallon in the city and 20 mpg on the highway.
Befitting of its more powerful engine, the Flying Spur also gets a more athletic appearance with a more upright face, arched front and rear fenders and horizontal taillights that better distinguish it from the Continental GT. The new roofline also gives the car a sportier shape and the side windows add a more contemporary look, but this car is almost identical in size to the current model including the massive rear overhang, which helps accommodate 16.8 cubic feet of cargo.

Ares Design Coupe for the Bentley Mulsanne is the grand tourer we dream about

Bentley exited the grand coupe business when it made the last of 550 Brooklands models in 2011. The UK carmaker said it will make 19 examples of the Mulsanne Grand Convertible, but that doesn't count as a coupe. So when a U.S. Mulsanne owner wanted his Bentley with a roof but a touch less four-door-y, he went to Italian coachbuilders Ares Design. And not only did Ares do the thing, they did it magnificently. The resulting two-door is called the Ares Design Coupe for the Bentley Mulsanne, and the first of them was just handed over in Beverly Hills in time for a Pebble Beach appearance. Modena-based Ares started with a three-dimensional scan of the sedan, then reworked that CAD file into the coupe they sought by changing just about everything behind the A-pillars. A reprofiled roof replaces the old one, and it falls into a new backlight and longer rear decklid. The engineers moved the B-pillars rearward to install longer front doors, and fabricated new side impact protection for the portals and rear quarter panels. New chrome surrounds on the windows maintain the look as if from Crewe. Yet because the roof and doors are made from carbon fiber, they contribute to the coupe's 992-pound overall weight loss compared to the donor four-door. Inside, Ares replaced the front seats with more rakish thrones, redesigned the interior trim panels to flow with the body style, and matched the wood and leather as if all were factory original. Under the unchanged hood, a tuned ECU means the 6.75-liter twin-turbo V8 produces more than 591 horsepower and 811 pound-feet of torque, both healthy improvements on the stock 505 hp and 752 lb-ft. Completing the transformation, the coupe sits 20 millimeters lower on "a sportier suspension." One report said that a friend of the California owner likes the car so much that a second two-door has already been commissioned. Ares charges $460,000 for the service, to start, and it takes about six weeks. And no, that price doesn't include the donor Bentley. However, that's a lot less than Bentley would charge to make the swap, since the carmaker won't make the actual car. The Italian firm said it wants to keep volumes "ultra-low," yet, "As long as [Bentley] don't make one, we will continue." Although we haven't spoken much of Ares here outside of their Tesla Model S wagon, the firm led by ex- Lotus boss Dany Bahar has kept busy in its four years of operation.

VW announces reworked 6.0 W12 TSI engine

Nobody makes more engines with a dozen cylinders than the Volkswagen Group. They're W12s, of course, owing to the novel shape of their cylinder banks. Now the German industrial giant has announced a comprehensively reworked version of that engine at the same Vienna Motor Symposium where it presented its new 2.0-liter turbo four. The new W12 retains the same arrangement and the same 6.0-liter displacement, but updates it all with the latest powertrain tech. In place of Audi's FSI direct injection and Bentley's TMPI multi-point injection, the engine has adopted a new TSI system. It's also got a pair of new twin-scroll turbochargers, APS-coated cylinders, a new cooling system, active engine mounts, cylinder deactivation, and a stop/start system. And – crucially for application in the upcoming Bentayga – it has an oil circuit designed for off-road use. The revised package now produces 600 horsepower and 664 pound-feet of torque. Considerably more than the 567 hp and 516 lb-ft offered in the Bentley Continental GT W12, but less than the GT Speed, which we suspect will get an even more powerful version of this new engine. It's also more powerful than even the top version of Audi and Bentley's 4.0-liter twin-turbo V8, to make the W12 a more compelling option. Of course that's just as far as the Continental GT is concerned. The W12 has also found use in the Continental GTC and Flying Spur, as well as the Volkswagen Phaeton and Audi A8, and could find further applications under the Flying B emblem and elsewhere in the future. VW says that in the right application (say, in the production version of the Bentley EXP 10 Speed 6 concept, for example), the new twelve-pot could deliver 0-62 times of under four seconds and a top speed in excess of 186 miles per hour. Volkswagen at the 36th International Vienna Motor Symposium Dr. Heinz-Jakob Neusser: "The car of the future will continue to fascinate people" - CO2 reduction, electromobility and digitalisation are the greatest challenges facing the automotive industry - The future of the internal combustion engine will be characterised by high rpm diesel and high-performance three-cylinder TSI engines - Laser roughening – innovative coating process in large-scale production - New 6.0 W12 TSI with 447 kW (608 PS) – performance and refinement - New generation of EU6 TDI engines for light-duty vehicles Dr.