1998 Bentley Turbo Rt Mulliner In Amazing Condition...!!!! on 2040-cars

Auto blog

Bentley to retire aging 6.75-liter V8 with current Mulsanne

The massive 6.75-liter V8 in the Bentley Mulsanne is one of the oldest engines still in production. But it may not be around for much longer. According to Car and Driver, Bentley intends to finally put the big old pushrod V8 to pasture once the current Mulsanne is phased out, thus putting an end to a saga that goes back some 57 years. Powerful as it may be, ever-stricter exhaust emissions and fuel-consumption regulations will see that the L Series V8, originally introduced way back in 1957, doesn't stay in production forever. Whenever the Mulsanne is replaced, it will reportedly get a brand-new twelve-cylinder engine. Bentley is currently the world's largest producer of dozen-pot powerplants. Production of the British automaker's 6.0-liter twin-turbo W12 far outpaces anything from Rolls-Royce, Mercedes-Benz, BMW, Ferrari, or Lamborghini. Over the decades since its introduction, Bentley's long-serving V8 has gone from making an "adequate" amount of power and torque to an impressive 530 horsepower and a positively massive 811 pound-feet (with the help of a couple of turbochargers). Its eventual discontinuation wouldn't be the first attempt on the life of the 6.75-liter engine. When BMW briefly took control of both Rolls and Bentley, it replaced the big engine by a smaller 4.4-liter V8. Customer demand led Bentley to bring the old engine back. It will likely be some time before we get details of Bentley's next powerplant. Models like the Mulsanne and Rolls-Royce Phantom tend to stick around for a long time, and the latest version of Bentley's flagship was just released earlier this year. Related Video:

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

Bentley Continental GT commemorating Pikes Peak win is one green machine

Back in June, the Bentley Continental GT set a production-car record for the Pikes Peak hill climb, and now there's a limited edition to celebrate. Maybe the wait was so the brand's Mulliner division could work up a batch of the car's special green paint, which Bentley calls Radium. The green hue is taken from the hill climb car's livery, and it appears not only on the body, but also on the Pirelli P Zero tires and inside as contrast stitching, floor mat edging, and embroidery of Pikes Peak on the headrests. The not-quite-matching color on the brake calipers is Bentley's Acid Green. Besides Radium, the model also is offered in black. The special edition also features Pikes Peak graphics on the front fenders, a carbon fiber body kit, a black roof panel, black side mirrors, and 22-inch wheels also in black. Buyers can opt for Bentley's "100" grille (honoring the brand's centenary year), as pictured here. Besides the Radium green accents, the interior also comes with carbon fiber and gloss-black trim. A graphic showing one of five different sections of the track appears above the glove box, along with the record time of 10:18.488. Bentley's rotating center display also is included along with comfort-spec front seats and deep pile floor mats. All of the cars will be fitted with the 626-hp W12 engine. Pricing for the Pikes Peak limited edition depends on buyer specification, so there's no official MSRP. Nor is there a specific model name. But Bentley is saying that only 15 cars with this special set of extras will be built, and even without a name, it shouldn't be hard to distinguish them from other Continental GTs.