2024 Bentley Continental Gt Edition 8 on 2040-cars

Auto blog

Bentley Bentayga takes Pikes Peak SUV record

Earlier this spring, we wrote about Bentley's bid to beat the existing Pikes Peak record for sports utility vehicles, with racing driver Rhys Millen behind the wheel of a bright green Bentayga. And this past weekend, they did it, slicing almost two minutes off the earlier record. Having been set by Paul Dallenbach with a Range Rover Sport back in 2013, the old record stood at 12:35.61. The New Zealand-born Millen completed the course in 10:49.9, at an average speed of 66.5 miles per hour. To pass Pikes Peak scrutineering and to keep Millen safe, the near-stock Bentayga had been fitted with a roll cage and racing seats, along with a harness and a fire suppression system; the only performance modification was a production-specification Akrapovic exhaust system. We expect the engine note to have been crowd-pleasing. The #Bentayga has smashed the Production SUV record at #PikesPeak, beating the previous best by nearly two minutes. @RhysMillen took just 10:49.9 to climb 5000 ft over 12.4 miles #BeExtraordinary pic.twitter.com/sEQ80FgwbE — Bentley Motors Comms (@BentleyComms) June 24, 2018 The 5000-foot climb has 156 corners, which the Radium Satin colored, 600-hp Bentayga attacked on stock Pirelli rubber. After his record run, Millen said: "To take a luxury SUV with minimal modifications and be able to drive up this course in under 11 minutes is a huge testament to the performance and level of engineering in the Bentayga." Related Video: Featured Gallery Bentley Bentayga Pikes Peak Image Credit: Bentley Motorsports Bentley Crossover SUV Luxury pikes peak bentley bentayga hill climb

New Bentley interior veneer sourced from American Red Gum trees

Bentley is turning stateside for its newest exclusive wood interior finish, sourcing its first new veneer in five years from American Red Gum trees found in Mississippi wetlands. Bentley calls the new veneer Liquid Amber, a reference to the wood's perfumed scent. The red-hued wood undergoes a weeks-long natural smoking process to deepen its brown luster. Afterward, the veneer is then transported to Bentley's wood shop in Crewe, England, where it's examined alongside the six other types of veneers harvested from China to Canada to determine suitability, based on a high-burr density, minimal sapwood and a lack of bark growth or structural defects. Bentley says it rejects between 30 percent and 70 percent of all veneers offered. Raw veneer is then cut to a precise 0.6-millimeter and tested for stability in UV light and consistency from tree to tree. The whole process takes at least 18 months before the veneer is installed in one of Bentley's vehicles, which start at $189,000 for the Flying Spur sedan. Also known as the Sweetgum tree, the American Red Gum is native to lowland areas of the southeastern United States. It was once used commercially for soaps, adhesives and pharmaceuticals but is valued today primarily for use in furniture, cabinetry and interior finishing. Bentley says it harvests the trees only twice a year due to restricted access to the wetlands where it sources the wood. Bentley also announced it has begun using slate and quartzite stone veneers sourced from select quarries in India. They're split from a larger stone piece, cured using fiberglass and a bespoke resin, and shaped and finished by hand by the Mulliner coach building team in Crewe.Related Video: Featured Gallery Bentley wood finish Image Credit: Bentley Bentley Luxury bentley flying spur

Ares Design Coupe for the Bentley Mulsanne is the grand tourer we dream about

Bentley exited the grand coupe business when it made the last of 550 Brooklands models in 2011. The UK carmaker said it will make 19 examples of the Mulsanne Grand Convertible, but that doesn't count as a coupe. So when a U.S. Mulsanne owner wanted his Bentley with a roof but a touch less four-door-y, he went to Italian coachbuilders Ares Design. And not only did Ares do the thing, they did it magnificently. The resulting two-door is called the Ares Design Coupe for the Bentley Mulsanne, and the first of them was just handed over in Beverly Hills in time for a Pebble Beach appearance. Modena-based Ares started with a three-dimensional scan of the sedan, then reworked that CAD file into the coupe they sought by changing just about everything behind the A-pillars. A reprofiled roof replaces the old one, and it falls into a new backlight and longer rear decklid. The engineers moved the B-pillars rearward to install longer front doors, and fabricated new side impact protection for the portals and rear quarter panels. New chrome surrounds on the windows maintain the look as if from Crewe. Yet because the roof and doors are made from carbon fiber, they contribute to the coupe's 992-pound overall weight loss compared to the donor four-door. Inside, Ares replaced the front seats with more rakish thrones, redesigned the interior trim panels to flow with the body style, and matched the wood and leather as if all were factory original. Under the unchanged hood, a tuned ECU means the 6.75-liter twin-turbo V8 produces more than 591 horsepower and 811 pound-feet of torque, both healthy improvements on the stock 505 hp and 752 lb-ft. Completing the transformation, the coupe sits 20 millimeters lower on "a sportier suspension." One report said that a friend of the California owner likes the car so much that a second two-door has already been commissioned. Ares charges $460,000 for the service, to start, and it takes about six weeks. And no, that price doesn't include the donor Bentley. However, that's a lot less than Bentley would charge to make the swap, since the carmaker won't make the actual car. The Italian firm said it wants to keep volumes "ultra-low," yet, "As long as [Bentley] don't make one, we will continue." Although we haven't spoken much of Ares here outside of their Tesla Model S wagon, the firm led by ex- Lotus boss Dany Bahar has kept busy in its four years of operation.