2007 Bentley Continental Gt Gtc Convertible Automatic 2-door Convertible on 2040-cars

Auto blog

Now you can order a Bentley with real stone trim

Order up a new Bentley and you'll have some choices to make. After choosing which model, you'll need to select from over a hundred standard exterior paint colors and a staggering array of trim options – and now, interior stone veneers. Mulliner will now outfit your Bentley with actual stone trim. Now we know what you're probably thinking: stone adds weight. But here's the kicker: Bentley's new stone veneers measure just 0.004 inches thick. That's less than the breadth of a human hair, and (according to the automaker) makes these trim pieces not only very lightweight, but also translucent. The rocks are sourced from quaries in India, cured using fiberglass and resin, and finished by the Mulliner coachbuilding team back at the factory in Crewe, England. Customers will be able to select between a natural finish or in four tints to install on a new Continental or Flying Spur. So if you were hoping for a little extra ballast in your 5,300-lb Bentayga or 6,000-lbs Mulsanne, we're afraid you'll just have to choose a different interior accent. STONE VENEERS BY MULLINER – THE NEXT LEVEL OF MODERN BRITISH LUXURY - Bentley pushes boundaries of cabin luxury with new and rare materials - Lightweight and contemporary feature developed by Mulliner - Four exclusive colours: Galaxy, Autumn White, Terra Red and Copper (Crewe, 04 January, 2016) Bentley Motors' bespoke coach-building division, Mulliner, is introducing the next level of modern British automotive luxury – stone veneers. This innovative interior finish utilises state-of-the-art stone veneer technology to make a luxurious, contemporary feature of a natural product formed over 200 million years. The slate and quartzite stone is sustainably sourced from hand-selected quarries in Rajasthan and Andhra Pradesh, India – a nation with an ancient and rich culture of stone masonry. The sections of stone are split from larger pieces and cured using glass fibre and a bespoke resin. Finally, they are shaped and hand finished by Bentley's world-renowned Mulliner coachbuilding team at the company's headquarters in Crewe, England. The stone surfaces of the veneers are just 0.1 mm thick, meaning that they are both extremely light and translucent, allowing the elegant grain and pattern in the stone to be visible to the interior occupants.

Bentley forging ahead with SUV development

Bentley has a whole mess of new models in the pipeline, including a completely new coupe, two-door and high-performance versions of the Mulsanne and an even more hard-core version of the Continental GT3-R. But the most vital product under development at Crewe is its upcoming new SUV, and that's what our spy photographers have caught undergoing testing.
This prototype appears to be the same one we spotted a couple of months ago, although this time the NewBentley.com stickers appear to have been taped over (presumably to call less attention to itself) and the whole thing is riding lower to the ground to better test its brakes and cooling systems.
While the form clearly shares much with the EXP 9 F concept that previewed its development at the 2012 Geneva Motor Show, the design has clearly been worked over with a front end and tailgate that are easier on the eyes and more in keeping with the company's styling language.

Bentley plotting rear-drive Continental GT3-R?

Coupe, convertible or Flying Spur sedan: no matter what body-style you get, or what engine you specify, the Bentley Continental comes with all-wheel drive. It's been that way since the model line was first introduced a dozen years ago. But that looks poised to change... at least for one notable exception. According to Autocar, Bentley is all but certain to launch a rear-drive version of the Continental GT3-R sometime next year, ditching the front half of the drivetrain to cut a good 440 pounds off the curb weight to make it the lightest Conti yet. The Continental GT3-R launched last year with less weight and more power, along with a stiffer suspension, upgraded brakes and a titanium exhaust. It drew its inspiration from the Continental GT3 racer, but unlike the competition version, kept the AWD drivetrain in place. "A lot of people expected the GT3-R to be a proper rear-wheel-drive sports car," Bentley's chief engineer Rolf Frech said to Autocar, "but the problem was timing. We needed the car at the end of the first season of our GT3 racing car, and to do a proper change of the complete powertrain needed longer than we had. But we have the concept in our mind, so why not?" Denuded of its all-wheel drive, the Conti GT3-RS – assuming Porsche doesn't mind lending the name to its sister company – would be the most hardcore version of the go-to luxury coupe, and would promise to cut its already blitzkreig 3.6-second 0-60 time down even further. Especially if the 4.0-liter twin-turbo V8 were tuned to deliver even more than the 572 horsepower and 516 pound-feet of torque it already kicks out in the existing GT3-R. Chances are it'd be even less accessible, though: the 99 examples of the Conti GT3-R that are coming to the States out of the 300 total to be made already carry a $337k sticker price, and the rear-drive model would likely push the production:price see-saw even higher to the right.