2005 Bentley Continental Gt on 2040-cars

Auto blog

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

Bentley releases new details on Continental GT3 racer

Porsche's new LMP1 Prototype isn't the only motorsports news coming out of Volkswagen AG this week. After unveiling its new Continental GT3 at the Paris Motor Show last year, Bentley has released some new images and details as this racecar continues its development. Similar to the Porsche announcement, Bentley's new GT3 marks a significant return to motorsports, only in this case, Bentley hasn't raced a car since 2003 - a winning effort at the 24 Hours of Le Mans.
From street to race form, the Continental has dropped about 2,200 pounds by shedding many of the luxury and tech features that make the street-legal Continental GT the car that it is - including 50(!) electronic control units. The Continental GT3 uses the same 4.0-liter, twin-turbo V8 as the road car, but we're guessing output has been tweaked a bit from the standard 500 horsepower. Except for the carbon fiber hood, decklid and doors, Bentley says that the body of the GT3 is a direct carryover from the Continental GT.
Inside, even a stripped interior and full roll cage won't stop Bentley from being Bentley as it gives this racecar the same attention to detail as its road cars - the seats, steering wheel and door pulls all receiving the hand-crafted treatment from the factory in Crewe. There is no word as to when the Continental GT3 will make its racing debut, but more details about the car can be found below in the official press release.

Bentley debuts the first Bentayga Hybrid in Geneva

Transcript: Bentley unveils the "world's first" luxury hybrid. Bentley revealed the Bentayga Hybrid at the 2018 Geneva International Motor Show. This is Bentley's first step toward eventually going fully electric. The Bentley Bentayga Plug-in Hybrid will include a turbocharged 3.0-liter V6 engine and the "E Motor." The E Motor acts as a generator and electric motor with 3 E Modes: EV Drive, Hybrid Mode, and Hold Mode. It has an electric range of 31 miles with a charge time of 2.5 hours using an industrial connection. Or 7.5 hours using domestic household sockets. The Bentayga Hybrid will also include: traffic sign recognition, rear crossing traffic warning, top view, a 360 view of your surroundings, and park assist detection. What do you think of Bentley entering the electric world? The luxury automaker Bentley unveiled its first ever Bentayga Hybrid SUV at the 2018 Geneva International Motor Show. It's Bentley's first step into going fully electric. The 'E Motor' in the vehicle will provide an electric range of 31 miles with a charging time of 2.5 hours using an industrial connection. Want more coverage of the 2018 Geneva International Motor Show? Head over to www.autoblog.com/geneva-motor-show Green Geneva Motor Show Bentley Hybrid Autoblog Minute Videos Original Video