Certified 6.0l Navigation Am/fm Radio Sirius Massage K40 Radar on 2040-cars

Auto blog

Bentley Flying Spur V8 S solves the ultimate First World problem

Here's a First World problem if we've ever seen one: You want to get a Bentley Flying Spur, but you can't decide which engine. Well, Bentley has just made your decision even harder by introducing another new version. But we'll make it easier on you by telling you that this is the one you want. Slotting in between the existing V8 and W12 versions of the four-door Continental is the new Flying Spur V8 S. It packs the same 4.0-liter twin-turbo V8 as the base model, but augmented to 521 horsepower. That puts it on par, as you might have guessed, with the Continental GT V8 S coupe. It also puts it closer to the 500 hp of the standard V8 than the 616 hp of the 12-cylinder model, but with less weight in the nose, it promises to handle better. With 590 pound-feet of torque channeled to all four wheels through an eight-speed automatic transmission, the middle child of the Flying Spur range will rocket to 60 in just 4.6 seconds – 0.3 quicker than the base model – and top out at 190 miles per hour. Despite weighing nearly 5,500 pounds, though, features like cylinder deactivation and high-pressure direct injection mean it will still travel for 520 miles before needing to top up and return as much as 20 miles per gallon on the highway by our own EPA standards. Of course it's a Bentley, and it encompasses all the pampering luxury and status-symbol clout associated with the badge. But if you're looking for the luxury sedan you can push through the corners and rocket down the highway – and have the means to acquire one – your new ride may have just arrived. Look for it to make its debut mere weeks from now at the Geneva Motor Show. BENTLEY FLYING SPUR V8 S: THE SPORTING SIDE OF LUXURY - World's most refined V8 performance sedan gets even more power and torque - Outputs increase to 528 PS and 680 Nm; 0-100 km/h time just 4.9 seconds with a top speed of 306 km/h - Revised suspension offers improved body control and handling without sacrificing comfort - Black radiator grille, rear diffuser and new grille insert give V8 S a dramatic and purposeful appearance - Unique exterior colours and interior trim options - New Flying Spur V8 S makes debut at Geneva International Motor Show, 1 to 13 March (Crewe, 17 February 2016) Bentley Motors is today announcing the introduction of a new model to its range – the Flying Spur V8 S.

VW announces reworked 6.0 W12 TSI engine

Nobody makes more engines with a dozen cylinders than the Volkswagen Group. They're W12s, of course, owing to the novel shape of their cylinder banks. Now the German industrial giant has announced a comprehensively reworked version of that engine at the same Vienna Motor Symposium where it presented its new 2.0-liter turbo four. The new W12 retains the same arrangement and the same 6.0-liter displacement, but updates it all with the latest powertrain tech. In place of Audi's FSI direct injection and Bentley's TMPI multi-point injection, the engine has adopted a new TSI system. It's also got a pair of new twin-scroll turbochargers, APS-coated cylinders, a new cooling system, active engine mounts, cylinder deactivation, and a stop/start system. And – crucially for application in the upcoming Bentayga – it has an oil circuit designed for off-road use. The revised package now produces 600 horsepower and 664 pound-feet of torque. Considerably more than the 567 hp and 516 lb-ft offered in the Bentley Continental GT W12, but less than the GT Speed, which we suspect will get an even more powerful version of this new engine. It's also more powerful than even the top version of Audi and Bentley's 4.0-liter twin-turbo V8, to make the W12 a more compelling option. Of course that's just as far as the Continental GT is concerned. The W12 has also found use in the Continental GTC and Flying Spur, as well as the Volkswagen Phaeton and Audi A8, and could find further applications under the Flying B emblem and elsewhere in the future. VW says that in the right application (say, in the production version of the Bentley EXP 10 Speed 6 concept, for example), the new twelve-pot could deliver 0-62 times of under four seconds and a top speed in excess of 186 miles per hour. Volkswagen at the 36th International Vienna Motor Symposium Dr. Heinz-Jakob Neusser: "The car of the future will continue to fascinate people" - CO2 reduction, electromobility and digitalisation are the greatest challenges facing the automotive industry - The future of the internal combustion engine will be characterised by high rpm diesel and high-performance three-cylinder TSI engines - Laser roughening – innovative coating process in large-scale production - New 6.0 W12 TSI with 447 kW (608 PS) – performance and refinement - New generation of EU6 TDI engines for light-duty vehicles Dr.

Bentley wants to get into the coachbuilding business

There was a time when a customer would buy a chassis from an automaker like Bentley and then take it to a coachbuilder to have whatever bodywork they wanted put on it. The practice was particularly prevalent in Bentley's earlier days, but the industry has progressed in such a way - with tighter regulations and unibody construction - that such a practice is no longer feasible. But Bentley wants to get back into that business.
Speaking to UK trade publications recently, Bentley sales chief Kevin Rose indicated that the company is looking into setting up a special division within itself to meet the demands of extremely wealthy customers who want to commission their own coachbuilt custom creations. It's an emerging trend that's seen Ferrari Special Projects build one-offs like the F12 TRS and SP12 EC and McLaren Special Operations the outlandish X-1, and Bentley wants to get in on the action.
It wouldn't be the first even to rebody a contemporary Bentley in recent years. Carrozzeria Touring Superleggera offers the Flying Star (pictured above) that turns the Continental GT into a shooting brake, and Dany Bahar's new coachbuilding outfit Ares plans to do the same. By bringing it in-house, however, Bentley would be able to pick the chassis up off the assembly line at the right time and provide the necessary support and factory backing.