$775/ Month !!! Carfax Certified !! Black On Black !! on 2040-cars

Auto blog

Bentley unveils Rhys Millen's Pikes Peak Continental GT for record attempt

At the end of it all, Rhys Millen might end up owning every Pikes Peak car record that exists. He's time-trialed the perilous mountain road in several wildly different types of vehicles, such as a Hyundai Genesis coupe racecar, the Hyundai RMR PM580-T, the Drive eO PP01 electric racecar, and a Bentley Bentayga. For 2019, Millen's at it again, and he's sticking with his new team at Bentley. On June 30, Millen will gun for the production car record time in a Continental GT. That Millen will drive a Continental GT is not exactly breaking news, as it was first announced in March. However, this is the first time Bentley has shown off the Continental GT's attention-catching Pikes Peak outfit. A matte bright green covers most of the car, with a geometric mountain range crawling up the midsection through the rear. In addition to sponsor stickers from Mobil 1 and Gran Turismo, the GT also wears No. 100 as a nod to the company's 100th anniversary. Millen will try to push the Continental GT from 9,300 feet above sea level to 14,100 feet faster than 10:26.9, the hill climb record for a production car. He'll be working against the GT's 5,985-pound gross vehicle weight, but that shouldn't be a problem with a twin-turbocharged 6.0-liter W12 under the hood. The Continental GT, which will race stock aside from safety equipment, is rated at 626 horsepower at 6,000 rpm and 664 lb-ft of torque at 1,350 rpm. It comes from the dealership claiming a 0-to-60 mph time of 3.6 seconds and a 207-mph top speed. An active all-wheel-drive system and Bentley Dynamic Ride should help Millen keep the car under control during turn after turn after turn up the mountain. If Millen succeeds, it would be a huge victory for Bentley, which would then own the production SUV and car records. Rolls-Royce can't do that.

Bentley unveils 202-mph Continental GT Speed Convertible

That purple haze all in your eyes is the 2013 Bentley GT Speed Convertible. The cynical view is, "Bah, take a GT Speed and cut the top off. There. Pass the salt, please...". But when you're Bentley, more than 90 years old, and charging these kinds of ducats, there's no reason to take the cynic's shortcut. So of course the GT Speed Convertible gets all of the Speed-family accoutrements: matrix radiator grille hiding a twin-turbocharged, 6.0-liter W12 with 616 horsepower and 590 pound-feet of torque, eight-speed ZF transmission enabling 15 percent better fuel economy, beefier lowered suspension, larger rifled exhaust tips, inlet manifold finished in black crackle and a Mulliner Driving Specification cabin.
Among the many refinements added to the convertible, though, are neck warmers in the seats, the 21-inch wheels unique to this car, class-leading stiffness - admittedly, it's a very small class, but its torsional rigidity of 22,500 Nm/degree is only 500 Nm below that of the Lamborghini Gallardo coupe. The stiffening required to achieve that number will undoubtedly have something to do with the 485-pound weight gain over the GT Speed Coupe.
Still, when the GT Speed Convertible weighs 5,500 pounds, what's a few hundred between friends? More importantly, the weight doesn't scuttle performance: 0-60 comes in 4.1 seconds, a tenth shy of the coupe. The gap stretches as you approach The Ton, the GT Speed Convertible needing just 9.7 seconds to get there, the coupe just nine seconds. Trust us, though, everyone will be too busy blasting along to notice. Everyone will want to pack light, however, because the Speed Convertible loses 3.5 cubic feet of trunk space. It remains the fastest four-seat convertible in the world with a 202-mph top speed.

Bentley starts testing the sold-out, 200-mph Bacalar roadster

Bentley took the limited-edition Bacalar from a sketch to a 200-plus-mph roadster in nine months, a shockingly short amount of time. Its engineers are now putting the first car through its paces at the same break-neck speed. Although the Bacalar is based on the Continental GT, the British firm explained nearly everything the driver will see and feel is specific to the car. Bentley developed over 750 new parts for it, including 40 built with carbon fiber, and the roadster shares no body panels with other members of the company's range. All of these components have to meet the same stringent quality standards as those created for regular-production models. Bentley gave its team 20 weeks to fine-tune the first prototype (pictured), which it calls car zero. Testing started earlier in 2020, so the car has already been put through a wind tunnel and pushed to the limit at triple-digit speeds — it's as stable and quiet as customers expect. Next, test drivers will pile on the miles to see how it holds up over time. They'll then test it at up to 176 degrees, and the final step will be validating the electrical system. Power for the Bacalar comes from a twin-turbocharged 6.0-liter W12 engine, which produces 650 horsepower and 667 pound-feet of torque. It spins the four wheels through an eight-speed automatic transmission. Bentley hasn't revealed what it will do with car zero at the end of the testing phase. Production is scheduled to start in 2021, and the 12 examples planned have already been spoken for. Each one will be unique; buyers will be invited to work directly with the company's design department to configure the interior and the exterior. Related Video: