Navigation Plus Pkg, Bluetooth, 6-speed Manual Transmission, on 2040-cars

Auto blog

Felix Baumgartner parachutes into racing at N?rburgring 24

There are plenty of commonalities to be found between astronauts and racing drivers. Both are daredevils by definition (if not by trade), both subject themselves to unfathomable G forces and both face very real risks when strapped into machinery that makes the very best use of advanced propulsion, aerodynamics and composite construction technologies. Yet you don't find much crossover between the two. There was talk of Niki Lauda, himself an experienced pilot, training to go into space with Virgin Galactic (which itself was sister to an F1 team for a while in Richard Branson's empire), but that didn't seem to materialize. Now we're receiving news that Felix Baumgartner will contest the Nürburgring 24 Hours this year.
Felix Whomgartner, you ask? Felix Baumgartner. He's more of a skydiver than an astronaut, but he made history in 2012 when he jumped out of a space capsule and set the record for the highest altitude in a manned balloon, the parachute jump from the highest altitude, and the highest velocity freefall as part of the Red Bull Stratos initiative. In other words, he may as well be an astronaut, because he fell down to the earth's surface from the stratosphere.
For his next challenge, Baumgartner will be climbing into an Audi R8 LMS Ultra in an attempt to tackle the Nürburgring. Having contested a handful of spec races under the VW Group umbrella, he'll undertake several test sessions and practice races before the main event in June, in which he'll alternate behind the wheel with professional racing drivers Frank Biela, Marco Werner and Pierre Kaffer. The initiative is part of the Audi race experience program that allows gentleman racers to team up with seasoned pros to take part in real races. Baumgartner will undoubtedly prove its highest-profile participant.

Audi considering other variants, turbo V6 for R8

More details from the Audi R8 event at Spain's Ascari circuit have met the Internet, and they provide more intel on the supercoupe will evolve over the second generation. First, they note some small differences in stance with this new car, being wider than the current car and sitting 30 millimeters (1.18 inches) lower. Compared to its Lamborghini Huracan brother, it gets three extra centimeters in the wheelbase. Filling out the power numbers, the 'entry-level' V10 engine at launch rolls out 540 horsepower and 399 pound-feet of torque, does the 0-60 mile per hour dash in 3.5 seconds, and hits a top speed of 200 mph. The V10 Plus model rocks 620 hp and 412 lb-ft, which slices 0.3 seconds off that acceleration time and adds five more mph to the top speed. They'll transfer their power through a seven-speed S-tronic that shifts faster than before, and it will in turn send power through an electronically-controlled clutch at the front axle and a constantly variable limited-slip differential at the rear axle. The power split is said to default to 42/58 front-to-rear, but 100 percent of the torque can be sent fore or aft. Benchmarked against the 991-series Porsche 911, driving sensations travel through an electromechanical steering setup that can be had with a variable rack if preferred, leading to standard 19-inch wheels with the option of 20-inchers and tires developed specifically for this car. A Performance setting offers dry, wet, and snow modes; that first setting turns the ESC off except for situations of impending doom, and Audi racer and test driver Frank Stippler told Top Gear that understeer is reduced, to which TG added "it oversteers at will." Stippler said it's "a lot closer to the GT3 race car than ever before," and even though it's "a lot" less intense than the Huracan, it's just as fast on the track. His estimate is that the new R8 will lap the Nurburgring between ten and 15 seconds faster than the current car. R8 technical lead Roland Schala said the new chassis opens up new avenues of development because "there's no problem to change it," mentioning models like a Clubsport or Superleggera as no longer forbidden. Differentiation could come from a wider engine mix, too. Markets like China need smaller displacements, so Audi's twin-turbo V8 is expected to join the line-up at some point, bringing 500 horsepower.

2017 Audi A4 Deep Dive

Unchanged. Plain. Boring. These words have been used to describe the new 2017 Audi A4, but they all miss the point entirely. Yes, the design of the new A4 is evolutionary, rather than a ground-up restyling. But as they say in ancient High German, "If it ain't broke, don't fix it." Of course, if you're at all interested in the 2017 Audi A4, you've probably read all about it in the official press release a few days ago. So we'll cut to the chase and tell you the bits you don't already know: the American-market details. We spent a day at Audi headquarters in Ingolstadt last week finding out the latest and poking around the A4 in the metal. The new A4 is wider, longer, and roomier than before. The lines are crisper and sharper, but yes, the proportions have remained very similar. That was done on purpose, thoughtfully. Not out of laziness. Stand any two sequential generations of Porsche 911 next to each other and you'll find they are rather similar. And yes, people do complain about that. But they also complain about the property tax rate on their third home in Monaco. That familiar-looking body gets a shockingly low coefficient of drag of just 0.23. The improvements in drag come from fine-tuning details down to the placement of the side mirror (now on the door, rather than the triangular window panel) and the contouring of the inner edge of the side mirror, which gets little vortex generating bumps to improve the turbulent airflow in that area, reducing drag. Attention to detail and refinement of a successful design – not boring, lazy repetition. Another notable departure in the styling of the new A4 is equally subtle, but even more significant from a precision manufacturing perspective: the hood has no cut lines on its upper surface. Instead, the hood now wraps around the tops of the fenders, the cut line integrating with the sharp crease that runs down the entire body side. The creation of this cut line requires extremely tight manufacturing tolerances to enable the precise alignment of the hood and fender gap with the stamped-in crease in the door panel; misalignment would be obvious and catastrophic to the clean, simple design's flow. Now, let's rip off this Band-Aid: no, we won't be getting the Avant. Why? Because no one buys it, vociferous vocalizations on the Internet aside.