2014 Audi V10 Spyder Quattro S Tronic on 2040-cars

Auto blog

Next Audi RS4 to get an electric turbo?

We don't yet know if the next Audi RS4 will come to the US, but whoever gets it could find an electric turbocharger under the hood according to a report in Auto Express. The 4.2-liter V8 that has served for two RS4 generations is retiring from the line, replaced by a twin-turbocharged version of the supercharged 3.0-liter V6 used in the S4. But instead of using two sequential turbochargers - a smaller one to eliminate lag while a larger, more powerful turbo spools up - batteries charged by brake regeneration could power a first-stage electric turbo. The idea hasn't been publicly appointed for a particular model, as Audi's technical chief Ulrich Hackerberg has said that due to expense, that kind of setup "would only be used be used on the very top end models." Since the technology cuts down on the use of exhaust gases, it would also also help in markets like Europe where CO2 emissions are a factor. No matter whether it benefits from all conventional or some electric boost, the horsepower number for the twin-turbo V6 will be more than 420 hp but less than 503 hp, the rating of the V8-powered Mercedes-Benz C63 AMG. Auto Express believes Audi will want to maintain the power gap between the 333-hp S4 and previous, 444-hp RS4. With Hackenberg saying the new S4 will make more than 350 hp, that gets the coming RS4 up to at least 461, but AE figures it "could deliver as much as 480 hp." We'll find out sometime after the S4 launches next year.

Audi reveals all-new R8 ahead of Geneva debut

This year's Geneva Motor Show is shaping up to be an absolutely orgy of supercars, but though there will be many that will surely outperform it, few have been as hotly anticipated as the arrival of the all-new, second-generation Audi R8. And here it is. Based around an all-new Audi Space Frame chassis, the new R8 is constructed of a higher proportion of aluminum and carbon fiber than its predecessor. The result is a frame that weighs 15 percent less at just 441 pounds – yet is 40 percent more torsionally rigid - tipping the scales at 3,205 lbs in top spec. Into the middle of that frame Audi has installed a revised version of its 5.2-liter V10, eschewing turbochargers but incorporating new technologies. While other powertrain options are expected to follow, Ingolstadt has gone straight for the top of the range at launch: the 'base' V10 model kicks out 540 horsepower and 398 pound-feet of torque to reach 62 miles per hour in 3.5 seconds and a top speed of 201 mph. The upgraded V10 Plus, however, turns those figures up to 610 hp and 413 lb-ft to reach 62 in just 3.2 seconds, 124 in under ten and a 205-mph top speed. All the while, Audi has also equipped the new ten-cylinder engine with both direct and indirect injection, stop/start and cylinder deactivation systems to cut fuel consumption by 10 percent. It also boasts dry-sump lubrication and a variable exhaust system. Power is transmitted to the road through a seven-speed dual-clutch transmission, a mechanical diff and a revised Quattro all-wheel drive system that can send 100 percent of available torque to either the front or rear axle. Aluminum wishbones suspend it all on 19-inch wheels (or optional 20s), with available variable steering and carbon ceramic brakes (optional on the V10 and standard on the V10 Plus). Underbody aerodynamics generate more downforce and a more slippery form, aided by a deployable rear spoiler (or a fixed carbon wing on the Plus model). All those tantalizing greasy bits are cloaked in fresh aluminum sheet-metal, riding on a track that's 1.6 inches wider: the whole shebang stretches 14.5 feet long, 6.4 feet wide and 4.1 feet high, riding on an 8.7-foot wheelbase. Among the myriad new technologies developed for the new R8 are the full LED headlights with optional laser high beams (where they're legal, at least, which currently doesn't include these United States).

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.