2018 Audi Q7 2.0t Quattro Premium Plus Awd 4dr Suv on 2040-cars

Auto blog

2015 Audi A3 Cabriolet

When my 758-mile journey on the A3 TDI Challenge came to an end in Boulevard, CA, Audi had a very nice consolation prize waiting for me: the 2015 A3 Cabriolet you see here. And with miles left to drive before reaching my hotel in Coronado (just outside of San Diego), what better way to celebrate my personal victory of achieving nearly 60 miles per gallon in the TDI than to run the rest of the route in couple of turbocharged A3 droptops? After all, the efficiency part of my drive was done, so it was time to have some fun. The A3 Cabriolet comes to market just as the sun sets on another four-seat convertible from the Volkswagen Group stable: the Eos. That car, often criticized as being too expensive, is technically replaced by the Beetle Convertible as far as VW-badged products go. But for those who still prefer something a bit more upmarket, the A3 Cabriolet will fill the void nicely, and with more style and grace than the Eos ever had. Driving Notes The A3 Cabriolet arrives with a choice of engines. On the base end lives a 1.8-liter turbo-four with 170 horsepower, 200 pound-feet of torque and front-wheel drive, or you can pony up for the 2.0T with 220 hp, 258 lb-ft and standard Quattro all-wheel drive. Regardless of engine, the only transmission available in the A3 Cab is Audi's six-speed S-tronic dual-clutch unit. This is a fine cog-swapper, with quick shifts regardless of chosen powertrain, and steering wheel-mounted paddles that offer plenty of fun from behind the wheel. That said, I found it best to just leave the transmission alone, no matter the engine. The paddles are entertaining, sure, but slick the gear selector into Sport and the A3 will instinctively hold gears through turns and always have you right in the heart of the powerband. The 1.8T's 170 hp and 200 lb-ft are more than adequate for duty in the 3,373-pound A3 Cabriolet. I was never bothered by a lack of power, especially with the engine on boil with the transmission in its sport setting. Hitting 60 miles per hour takes 7.4 seconds, en route to an electronically limited top end of 130 miles per hour. If speed is your thing, though, the 2.0T certainly delivers quite a punch. That same 0-60 sprint takes just 5.9 seconds with the more potent powerplant, and you can really feel the stronger rush of power right off the line, even with the quicker A3's 210-pound weight penalty.

Audi Airomorph is a sleek shape-shifting senior thesis

Eric Kim just graduated from the from the Art Center College of Design in Pasadena, CA, at the end of the spring 2014 semester, and for his senior thesis project he came up with this futuristic Audi endurance racer called the Airomorph. He even got some input Audi designer Kris Vancoppenolle.
The Airomorph imagines a future Audi racer for Le Mans that features adjusting fabric panels to fine-tune the car's aerodynamics as it laps the course - a technology inspired by catamaran racing. "I started from scratch and had the freedom to deliver and execute a white space design for the future," said Kim to Autoblog via email. It's also somewhat similar to the idea behind BMW Gina concept, although Kim says that wasn't an inspiration for his design. The body here is made from a single piece of a silver, expansion-resistant material stretched over a frame underneath. The fabric anchors at the wheels, front and rear section with movable cables, and hydraulic actuators pull the wires to shift the aero as needed.
The actual shape echoes Audi endurance racers from the past and present. In profile, you can easily see the current R18 with its arcing cockpit and fin down the rear. Of course, that's interpreted through a little bit of Blade Runner with the covered wheels sticking out from the body. The front shows the rectangular shapes from the earlier R15. There doesn't appear to be any way to actually see out of the vehicle, though.

Audi bringing matrix 'organic' LED concept to Frankfurt

Audi has announced that it's bringing a new concept to the upcoming Frankfurt motor show in September, and now it is teasing the taillights. They adopt organic light-emitting diode technology, which takes advantage of several benefits. For one, it uses a relatively low amount of electricity, between three and four volts. It's also incredibly thin, made up of two layers, each less than a thousandth of a millimeter thick. It casts no shadows, requires no reflectors or any other elements, and emits very little heat. Plus the lights can be formed into different shapes, opening up new possibilities for designers. This isn't the first time we've seen Audi focus on lighting technology, and in recent years it's showcased matrix LED and matrix laser headlights. The company runs through the history of the evolution of its lighting tech in the video above. We'll have to wait a little longer to find out what the team from Ingolstadt will be putting these new taillights on. Audi presents latest lighting technology at the IAA in Frankfurt - Matrix OLED technology makes its debut in a concept car at the IAA - Light attains a new level of homogeneity - Flat light sources open up new design possibilities Audi is presenting its next step in automotive lighting technology at the IAA in Frankfurt. The new Matrix OLED lights enable a previously unattainable level of lighting homogeneity, opening up further creative opportunities for design. As the leading brand in automotive lighting technology, Audi has systematically developed all aspects of OLED technology over the years. Matrix OLED lights combine high-tech engineering and design ideally – initial projects are currently underway to implement OLED technology in production tail lights. They are being shown for the first time in a concept car at the IAA. OLED is an English acronym for "organic light emitting diode." In each OLED unit, two electrodes – of which at least one must be transparent – incorporate numerous thin layers of organic semiconductor materials. A low DC voltage – between three and four volts – activates the layers, each of which is less than one-thousandth of a millimeter thick, to light them. The color is based on the molecular composition of the light source. In contrast to point light sources – such as LEDs – which are made of semiconductor crystals, OLEDs are flat light sources. Their light attains a new level of homogeneity, and its dimming is continuously variable.