2008 Audi A6 3.2 Qtr Call 201-376-8510 on 2040-cars

Auto blog

2017 Audi A4 Deep Dive

Unchanged. Plain. Boring. These words have been used to describe the new 2017 Audi A4, but they all miss the point entirely. Yes, the design of the new A4 is evolutionary, rather than a ground-up restyling. But as they say in ancient High German, "If it ain't broke, don't fix it." Of course, if you're at all interested in the 2017 Audi A4, you've probably read all about it in the official press release a few days ago. So we'll cut to the chase and tell you the bits you don't already know: the American-market details. We spent a day at Audi headquarters in Ingolstadt last week finding out the latest and poking around the A4 in the metal. The new A4 is wider, longer, and roomier than before. The lines are crisper and sharper, but yes, the proportions have remained very similar. That was done on purpose, thoughtfully. Not out of laziness. Stand any two sequential generations of Porsche 911 next to each other and you'll find they are rather similar. And yes, people do complain about that. But they also complain about the property tax rate on their third home in Monaco. That familiar-looking body gets a shockingly low coefficient of drag of just 0.23. The improvements in drag come from fine-tuning details down to the placement of the side mirror (now on the door, rather than the triangular window panel) and the contouring of the inner edge of the side mirror, which gets little vortex generating bumps to improve the turbulent airflow in that area, reducing drag. Attention to detail and refinement of a successful design – not boring, lazy repetition. Another notable departure in the styling of the new A4 is equally subtle, but even more significant from a precision manufacturing perspective: the hood has no cut lines on its upper surface. Instead, the hood now wraps around the tops of the fenders, the cut line integrating with the sharp crease that runs down the entire body side. The creation of this cut line requires extremely tight manufacturing tolerances to enable the precise alignment of the hood and fender gap with the stamped-in crease in the door panel; misalignment would be obvious and catastrophic to the clean, simple design's flow. Now, let's rip off this Band-Aid: no, we won't be getting the Avant. Why? Because no one buys it, vociferous vocalizations on the Internet aside.

Don't hold your breath for an Audi RS8

There was a time not so long ago when Quattro GmbH produced essentially one model at a time. But that time is behind us. These days it's expanding into a full-fledged performance division to rival Mercedes-AMG and BMW's M department. Quattro GmbH is currently building the Audi RS4 Avant, RS5 coupe and cabrio, RS6 Avant, RS7, RS Q3 and the TT RS coupe and roadster - not to mention the R8. And while it's showing no signs of slowing down, but the latest intel from across the pond suggests we shouldn't count on an RS version of Audi's flagship sedan.
This according to Car and Driver, which spoke to Stephan Reil, the chief engineer at Quattro GmbH. Reil says Audi works on a teutonically rigid performance formula: an RS model has to have 20 to 25 percent more power than the existing S version. Considering that the existing S8 makes 512 horsepower and the RS7 a solid 553, we're not sure Audi really needs anything more powerful. But by Reil's calculations, the RS8 would need to pack between 630 and 655 hp, which would put it well ahead of rivals like the 550-hp Jaguar XJR, the 540-hp BMW Alpina B7, the 523-hp Maserati Quattroporte and even the new 577-hp Mercedes-Benz S63 AMG - and in league only with the even more powerful S65 AMG, which in its outgoing form produced 630 hp.
The question then comes down to whether there are enough customers lining up for the S65 that Audi would want to poach away from Mercedes. Or perhaps more pertinently, whether it might end up just taking customers from the new Bentley Flying Spur, which is already offering 616 horsepower in an even more prestigious, if less performance-focused package. Either way you look at it, Audi is apparently steering clear.

Recharge Wrap-up: Atieva making EV with former Tesla talent, Holland lowers PHEV incentives

A reduction of tax incentives on company cars in Holland is expected to put the brakes on plug-in hybrid sales. Cars are taxed at an average of 25 percent, with plug-in hybrids taxed at just seven or 14 percent, depending on emissions. Taxes on PHEV company cars will increase to 14 and 21 percent. With company car leases making up a third of vehicle sales in 2014, the uptake on PHEVs "will likely go back to regular volumes," according to Volvo's Christiaan Krouwel. It could be a boon for battery electric cars, as their tax rate will remain at four percent for company cars. Read more at Automotive News Europe. Ford is testing cylinder deactivation in its 1.0-liter EcoBoost engine. On-road prototype testing has shown improvements in fuel economy of as much as six percent. Ford engineers developed a system using a new dual mass flywheel, pendulum absorber, and tuned clutch disc to allow cylinder deactivation under a wider range of speed and engine loads with less NVH. "The highest priority in the development of new combustion engines for automotive applications is the ongoing reduction of fuel consumption," says Ford's Andreas Schamel, presenting Ford's findings to the Vienna Motor Symposium. Read more at Green Car Congress or in the press release from Ford. Atieva is building an EV with the help of numerous former Tesla employees. The Silicon Valley-based startup was founded in 2007 by a former Tesla vice president, and its roster includes 12 other former Tesla employees. Already well funded, Atieva is now looking to fill its ranks with more talent, with 32 engineering positions, two recruiter positions and other job openings posted at its website. As for the EV it is working on, Atieva says it is "redefining what a car can be, by building an iconic new vehicle from the ground up." Read more at Charged EVs. Testing shows that Joule ethanol, made from recycled CO2, meets standards for use in the US and Europe. In partnership with Audi, Joule has been working toward making its recycled CO2 fuels ready for commercialization. "We are pleased to achieve another critical step towards our planned near-term delivery of fuel-grade ethanol from recycled CO2," says Joule President and CEO Serge Tchuruk. "Using waste CO2 as a feedstock, our technology has the two-fold advantage of reducing greenhouse gas emissions and producing cost-competitive, drop-in fuels." Joule will use these test results to get government approval for the use of its ethanol in highway fuel.