1998 Audi A6 Quattro Base Sedan 4-door 2.8l on 2040-cars

Auto blog

Audi R8, Lamborghini Huracan could get twin-charged five-cylinder

Engine downsizing and forced induction are some of the biggest trends in automotive powertrains today because. They offer the chance to reduce emissions and boost fuel economy, while possibly maintaining power. The shift is already happening to performance cars with turbocharged four-cylinders finding their way into the Ford Mustang, Chevrolet Camaro, and future Porsches. Now, there are rumblings of a tiny chance for a similar change coming for the Lamborghini Huracan and Audi R8. Why the new powertrain? China. While the market there might have slowing growth, it's still a major country for auto sales. The annual taxes on cars there also happen to be based on engine displacement, and there's a 40 percent rate on those over 4.0-liters, according to Car and Driver. The obvious answer to this conundrum is to build a smaller displacement, forced induction engine for the R8 and Huracan. Car and Driver points to the new turbocharged and electrically supercharged, 2.5-liter inline five-cylinder from the recent Audi TT Clubsport Turbo concept as a possible solution. Audi's e-turbo technology runs off a 48-volt electrical system and lithium-ion battery to produce a total of 600 horsepower and 479 pound-feet of torque in the prototype. With this mill, horsepower would barely shrink compared to the R8 V10 Plus and Lambo, but it actually makes more peak torque than their 5.2-liter V10s. While this is all theoretically feasible, take the possibility with a big grain of salt for now. According to Car and Driver, Quattro GmbH's Stephan Reil says that there's no work currently underway to fit the twin-charged five-cylinder, "but it has been talked about." That means such a vehicle is likely years away, if ever. In the meantime, a diesel version of the e-turbo setup is on the way the in the SQ7. Related Video:

Audi builds 5-millionth vehicle with Quattro

Quattro, the trademark name Audi has put on its all-wheel-drive system engineered for passenger vehicles, recently celebrated its five-millionth installation. The driveline has been offered in more than 140 different vehicles since its introduction more than three decades ago.
The all-wheel-drive technology made its world debut at the 1980 International Geneva Motor Show, beneath the floorpan of the Quattro Coupé, a low-volume two-door. It didn't take consumers long to embrace Audi's innovative approach. While most four-wheel-drive systems at that time utilized heavy transfer cases or second cardan shafts, Quattro was virtually tension-free, light, compact and efficient. Most importantly, enthusiasts found it was especially suitable for sports cars.
Today, the automaker offers Quattro on its full line of passenger vehicles and it is unquestionably successful (the technology enjoyed a 43 percent take rate in 2012). On models with transverse-mounted engines (A3 and TT), Audi uses an electronically controlled multi-plate clutch with hydraulic actuator. Under normal conditions, the clutch sends power almost exclusively to the front wheels (if wheel slippage occurs, up to 100 percent of the torque may be sent to the rear). Vehicles with transverse-mounted engines (A4, A5, Q5, etc...) use a self-locking center differential sending 40 percent of the engine torque to the front axle and 60 percent to the rear under normal conditions (it is able to send the majority of the power to the axle with better traction when needed). The highest-performing Quattro systems use torque vectoring to further improve cornering grip and speeds.

VW announces reworked 6.0 W12 TSI engine

Nobody makes more engines with a dozen cylinders than the Volkswagen Group. They're W12s, of course, owing to the novel shape of their cylinder banks. Now the German industrial giant has announced a comprehensively reworked version of that engine at the same Vienna Motor Symposium where it presented its new 2.0-liter turbo four. The new W12 retains the same arrangement and the same 6.0-liter displacement, but updates it all with the latest powertrain tech. In place of Audi's FSI direct injection and Bentley's TMPI multi-point injection, the engine has adopted a new TSI system. It's also got a pair of new twin-scroll turbochargers, APS-coated cylinders, a new cooling system, active engine mounts, cylinder deactivation, and a stop/start system. And – crucially for application in the upcoming Bentayga – it has an oil circuit designed for off-road use. The revised package now produces 600 horsepower and 664 pound-feet of torque. Considerably more than the 567 hp and 516 lb-ft offered in the Bentley Continental GT W12, but less than the GT Speed, which we suspect will get an even more powerful version of this new engine. It's also more powerful than even the top version of Audi and Bentley's 4.0-liter twin-turbo V8, to make the W12 a more compelling option. Of course that's just as far as the Continental GT is concerned. The W12 has also found use in the Continental GTC and Flying Spur, as well as the Volkswagen Phaeton and Audi A8, and could find further applications under the Flying B emblem and elsewhere in the future. VW says that in the right application (say, in the production version of the Bentley EXP 10 Speed 6 concept, for example), the new twelve-pot could deliver 0-62 times of under four seconds and a top speed in excess of 186 miles per hour. Volkswagen at the 36th International Vienna Motor Symposium Dr. Heinz-Jakob Neusser: "The car of the future will continue to fascinate people" - CO2 reduction, electromobility and digitalisation are the greatest challenges facing the automotive industry - The future of the internal combustion engine will be characterised by high rpm diesel and high-performance three-cylinder TSI engines - Laser roughening – innovative coating process in large-scale production - New 6.0 W12 TSI with 447 kW (608 PS) – performance and refinement - New generation of EU6 TDI engines for light-duty vehicles Dr.