09 Audi A4 2.0t Quattro Premium Heated Seats on 2040-cars

Auto blog

The next-generation wearable will be your car

This year's CES has had a heavy emphasis on the class of device known as the "wearable" – think about the Apple Watch, or Fitbit, if that's helpful. These devices usually piggyback off of a smartphone's hardware or some other data connection and utilize various onboard sensors and feedback devices to interact with the wearer. In the case of the Fitbit, it's health tracking through sensors that monitor your pulse and movement; for the Apple Watch and similar devices, it's all that and some more. Manufacturers seem to be developing a consensus that vehicles should be taking on some of a wearable's functionality. As evidenced by Volvo's newly announced tie-up with the Microsoft Band 2 fitness tracking wearable, car manufacturers are starting to explore how wearable devices will help drivers. The On Call app brings voice commands, spoken into the Band 2, into the mix. It'll allow you to pass an address from your smartphone's agenda right to your Volvo's nav system, or to preheat your car. Eventually, Volvo would like your car to learn things about your routines, and communicate back to you – or even, improvise to help you wake up earlier to avoid that traffic that might make you late. Do you need to buy a device, like the $249 Band 2, and always wear it to have these sorts of interactions with your car? Despite the emphasis on wearables, CES 2016 has also given us a glimmer of a vehicle future that cuts out the wearable middleman entirely. Take Audi's new Fit Driver project. The goal is to reduce driver stress levels, prevent driver fatigue, and provide a relaxing interior environment by adjusting cabin elements like seat massage, climate control, and even the interior lighting. While it focuses on a wearable device to monitor heart rate and skin temperature, the Audi itself will use on-board sensors to examine driving style and breathing rate as well as external conditions – the weather, traffic, that sort of thing. Could the seats measure skin temperature? Could the seatbelt measure heart rate? Seems like Audi might not need the wearable at all – the car's already doing most of the work. Whether there's a device on a driver's wrist or not, manufacturers seem to be developing a consensus that vehicles should be taking on some of a wearable's functionality.

Audi rolls out new A6 L E-Tron hybrid for China

Audi is expanding its range of hybrid models with the introduction of the A6 L E-Tron at the Shanghai Motor Show. It's earmarked specifically for the Chinese market and is based on the long-wheelbase A6 L already produced there. The new E-Tron model marries a 2.0-liter turbo four good for 211 horsepower and 258 pound-feet of torque to an electric motor with 122 hp and 162 lb-ft integrated into the eight-speed automatic transmission. A lithium-ion battery pack provides 14.1 kWh power. Mounted in the trunk, it limits cargo capacity to 11.9 cubic feet. The system produces net output of 245 hp and 369 lb-ft – enough to send the long-wheelbase hybrid to 62 miles per hour in 8.4 seconds en route to a top speed of 130 mph. All the while, it'll return 106.9 miles per gallon by the Chinese standard, traveling over 30 miles on electric power alone (at speeds of up to 83.9 mph) and up to 546.8 miles without needing to stop. The A6 L E-Tron is one of three new hybrids Audi is showcasing in Shanghai this year, alongside the Q7 E-Tron and Prologue Allroad concept. Ingolstadt, 2015-04-16 The new Audi A6 L e-tron for China - First Audi plug-in hybrid model from Chinese production - Output of 180 kW (245 hp) with extremely low consumption - 50 km (31.1 mi) electric range and total range of 880 km (546.8 mi) With the A6 L e-tron, Audi is taking an important step toward even greater fuel efficiency in China. The sedan has been developed specifically for the Chinese market. Its plug-in hybrid drive with 180 kW (245 hp) provides for powerful performance. The model consumes on average just 2.2 liters of fuel per 100 kilometers (106.9 US mpg). After launching the e-tron era in China with the imported A3 Sportback e-tron* in 2015, Audi is taking the next step with the local production of the A6 L e-tron beginning in 2016. The model is based on the long version of the Audi A6, which is already built in China, and is configured as a highly efficient parallel hybrid, meaning that its two drives are arranged one directly behind the other. The 2.0 TFSI is a state-of-the-art, four-cylinder, gasoline engine producing 155 kW (211 hp) and 350 Nm (258.1 lb-ft) of torque. The disk-shaped electric motor provides 91 kW and 220 Nm (162.3 lb-ft) of torque. Together with a decoupler, this is integrated into the eight-speed tiptronic transmission, which transfers the power to the front wheels. System output is 180 kW (245 hp); maximum system torque is 500 Nm (368.8 lb-ft).

Next Audi R8 to eschew engine downsizing, go on diet instead

Looking across the Audi landscape, many models that used to get the company's high-revving, naturally aspirated 4.2-liter V8 are now powered by smaller, yet similarly powerful, forced-induction engines. From what Auto Express is reporting, though, the next-generation Audi R8 will not meet this same fate.
Rather than ditching its V8 and V10 powerplants, the next-gen R8 - expected to debut in 2015 - will shed pounds from its curb weight. The 2014 R8 currently weighs between 3,583 pounds and up to 3,957 pounds, but the report says that engineers are targeting a weight of less than 3,300 pounds. All models will get cylinder deactivation, which along with lower curb weights should help to improve fuel economy and emissions. Head on over to Auto Express for more reported information as well as a handful of renderings that take a stab at how the next R8 may look.