Premium Diesel Hatchback 2.0l Bluetooth Fwd on 2040-cars

Auto blog

Audi details updated 3.0L V6 TDI engine

The brands in the Volkswagen Group have shown that they can develop some of the world's best diesel engines for passenger cars. At the Vienna Motor Symposium taking place May 8 and 9, Audi has an updated one to add to its lineup. It's launching a new version of the 3.0 TDI V6 with better efficiency and more power than the version currently in the US.
The new diesel will be offered in two tunes: 215 horsepower or 268 hp. However, Audi isn't giving away all of the new engine's secrets just yet. It says "depending on model" the mill makes as much as 442.5 pound-feet of torque and gets as much as 13 percent better fuel economy. That likely means the more powerful version gets the twist, and the other one has the better consumption, but we'll have to see.
To compare, the current 3.0 TDI offered in the US produces 240 hp and 428 lb-ft of torque. In the A6, it's rated at 24 miles per gallon city, 38 mpg highway and 29 mpg combined, according to the EPA.

Audi R8 V10 gets tuned up by ABT

Bavarian tuners ABT have done another job on the Audi R8 V10, pumping up the 5.2-liter FSI V10 from 525 horsepower to 600 hp, and torque from 391 pound-feet to 406 lb-ft. With 50 more horsepower than the R8 V10 Plus - but not the extreme weight-loss scheme - ABT claims a 0-62 mile per hour run of 3.5 seconds, the same as the R8 V10 Plus, and a top speed for the mid-engined coupe of 198 miles per hour "is no problem at all."
Managing all that speed are the aero tweaks provided by a comprehensive body kit including a rear wing, a lowered and beefed-up suspension, a stainless steel exhaust and 19-inch wheels in two different designs.
The press release below has a few more bits of info on the matter. And while ABT hasn't put a price on the Audi upgrades, but it's safe to say that nearly 200 mph in an R8 won't come cheap.

Audi builds 5-millionth vehicle with Quattro

Quattro, the trademark name Audi has put on its all-wheel-drive system engineered for passenger vehicles, recently celebrated its five-millionth installation. The driveline has been offered in more than 140 different vehicles since its introduction more than three decades ago.
The all-wheel-drive technology made its world debut at the 1980 International Geneva Motor Show, beneath the floorpan of the Quattro Coupé, a low-volume two-door. It didn't take consumers long to embrace Audi's innovative approach. While most four-wheel-drive systems at that time utilized heavy transfer cases or second cardan shafts, Quattro was virtually tension-free, light, compact and efficient. Most importantly, enthusiasts found it was especially suitable for sports cars.
Today, the automaker offers Quattro on its full line of passenger vehicles and it is unquestionably successful (the technology enjoyed a 43 percent take rate in 2012). On models with transverse-mounted engines (A3 and TT), Audi uses an electronically controlled multi-plate clutch with hydraulic actuator. Under normal conditions, the clutch sends power almost exclusively to the front wheels (if wheel slippage occurs, up to 100 percent of the torque may be sent to the rear). Vehicles with transverse-mounted engines (A4, A5, Q5, etc...) use a self-locking center differential sending 40 percent of the engine torque to the front axle and 60 percent to the rear under normal conditions (it is able to send the majority of the power to the axle with better traction when needed). The highest-performing Quattro systems use torque vectoring to further improve cornering grip and speeds.