2001 Audi Tt 225hp Quattro 6 Speed Manual 2-door Convertible on 2040-cars

Auto blog

Audi rolls out new A6 L E-Tron hybrid for China

Audi is expanding its range of hybrid models with the introduction of the A6 L E-Tron at the Shanghai Motor Show. It's earmarked specifically for the Chinese market and is based on the long-wheelbase A6 L already produced there. The new E-Tron model marries a 2.0-liter turbo four good for 211 horsepower and 258 pound-feet of torque to an electric motor with 122 hp and 162 lb-ft integrated into the eight-speed automatic transmission. A lithium-ion battery pack provides 14.1 kWh power. Mounted in the trunk, it limits cargo capacity to 11.9 cubic feet. The system produces net output of 245 hp and 369 lb-ft – enough to send the long-wheelbase hybrid to 62 miles per hour in 8.4 seconds en route to a top speed of 130 mph. All the while, it'll return 106.9 miles per gallon by the Chinese standard, traveling over 30 miles on electric power alone (at speeds of up to 83.9 mph) and up to 546.8 miles without needing to stop. The A6 L E-Tron is one of three new hybrids Audi is showcasing in Shanghai this year, alongside the Q7 E-Tron and Prologue Allroad concept. Ingolstadt, 2015-04-16 The new Audi A6 L e-tron for China - First Audi plug-in hybrid model from Chinese production - Output of 180 kW (245 hp) with extremely low consumption - 50 km (31.1 mi) electric range and total range of 880 km (546.8 mi) With the A6 L e-tron, Audi is taking an important step toward even greater fuel efficiency in China. The sedan has been developed specifically for the Chinese market. Its plug-in hybrid drive with 180 kW (245 hp) provides for powerful performance. The model consumes on average just 2.2 liters of fuel per 100 kilometers (106.9 US mpg). After launching the e-tron era in China with the imported A3 Sportback e-tron* in 2015, Audi is taking the next step with the local production of the A6 L e-tron beginning in 2016. The model is based on the long version of the Audi A6, which is already built in China, and is configured as a highly efficient parallel hybrid, meaning that its two drives are arranged one directly behind the other. The 2.0 TFSI is a state-of-the-art, four-cylinder, gasoline engine producing 155 kW (211 hp) and 350 Nm (258.1 lb-ft) of torque. The disk-shaped electric motor provides 91 kW and 220 Nm (162.3 lb-ft) of torque. Together with a decoupler, this is integrated into the eight-speed tiptronic transmission, which transfers the power to the front wheels. System output is 180 kW (245 hp); maximum system torque is 500 Nm (368.8 lb-ft).

Audi launches 2014 TDI models with hilarious spot

Audi has unveiled a set of new television spots that seek to continue the company's proselytizing of diesel-fueled luxury cars to the American pubic. With TDI versions of the A6, A7, A8, Q5 and Q7 available for its 2014 model year range, this is a subject that's obviously near and dear to the hearts of Audi marketers.
The first commercial, The Station, makes a play on the fact that many car buyers in the US don't associate luxury cars (in this case an A8) with those green-handled pumps at the "gas" station. The second commercial, Range, is a lot more informative (albeit less fraught with screaming and slowmo), discussing just how easy it should be to find a diesel fueling station in your long-range TDI before you need to fill up.
Continue on below for a look at both new commercials, or to have Audi explain them to you in great detail, via its press release.

Audi builds 5-millionth vehicle with Quattro

Quattro, the trademark name Audi has put on its all-wheel-drive system engineered for passenger vehicles, recently celebrated its five-millionth installation. The driveline has been offered in more than 140 different vehicles since its introduction more than three decades ago.
The all-wheel-drive technology made its world debut at the 1980 International Geneva Motor Show, beneath the floorpan of the Quattro Coupé, a low-volume two-door. It didn't take consumers long to embrace Audi's innovative approach. While most four-wheel-drive systems at that time utilized heavy transfer cases or second cardan shafts, Quattro was virtually tension-free, light, compact and efficient. Most importantly, enthusiasts found it was especially suitable for sports cars.
Today, the automaker offers Quattro on its full line of passenger vehicles and it is unquestionably successful (the technology enjoyed a 43 percent take rate in 2012). On models with transverse-mounted engines (A3 and TT), Audi uses an electronically controlled multi-plate clutch with hydraulic actuator. Under normal conditions, the clutch sends power almost exclusively to the front wheels (if wheel slippage occurs, up to 100 percent of the torque may be sent to the rear). Vehicles with transverse-mounted engines (A4, A5, Q5, etc...) use a self-locking center differential sending 40 percent of the engine torque to the front axle and 60 percent to the rear under normal conditions (it is able to send the majority of the power to the axle with better traction when needed). The highest-performing Quattro systems use torque vectoring to further improve cornering grip and speeds.