2008 Audi S6 5.2l V10 4dr Sdn on 2040-cars

Auto blog

Audi SQ5 TDI Plus packs more potent punch

While the SQ5 that Audi offers in North America packs a supercharged 3.0-liter V6 burning gasoline, the version it sells back home is fueled by diesel. And now, with the Frankfurt Motor Show fast approaching, Ingolstadt is rolling out an even more potent version. The new Audi SQ5 TDI Plus upgrades on the existing version with 27 more horsepower and nearly 37 pound-feet more torque. The six-cylinder twin-turbo diesel engine now cranks out 340 hp and a mountainous 516 lb-ft. That's over a hundred torques more than even the V10 Plus version of the new R8. Burning that midnight oil will rocket the SQ5 TDI Plus to 62 from a standstill in 5.1 seconds and on to an electronically limited top speed of 155 miles per hour. All the while it will return the equivalent of 35.6 miles per gallon of diesel fuel. Compared to the gasoline version offered Stateside, the TDI Plus now produces nearly as much power but way more torque. Performance figures are now nearly identical, but the TDI Plus uses less of the (typically) cheaper fuel. The upgraded package also includes 21-inch five-spoke alloys, additional gloss black accents, restyling tailpipes, and revised interior trim. The launch of the SQ5 TDI Plus follows that of the S8 Plus performance sedan, which our sources tell us is likely – but as yet unconfirmed – to be offered in the United States. <p>Your browser does not support iframes.</p> Even more power and top-of-the-line equipment: The Audi SQ5 TDI plus with 250 kW (340 hp) - The SQ5 TDI plus will launch on the German market in October 2015 - 700 Nm of torque; from 0 to 100 km/h in 5.1 seconds - On request, exclusive equipment package from quattro GmbH Audi is further expanding its range of S models. In October, the new SQ5 TDI plus* will arrive at German dealerships with more power and driving pleasure and even more extensive equipment – with 250 kW (340 hp), sport differential and 21-inch wheels. Even in its basic version, the successful Audi SQ5 TDI* comes as an SUV with the performance of a sports car. The plus version has an even higher power output. The biturbo V6 TDI produces 250 kW (340 hp) from its three liters of displacement by way of increased injection pressure. This results in 20 kW/27 hp more power compared to the SQ5 TDI. Its peak torque is increased by 50 (36.9 lb-ft) to 700 Nm (516.3 lb-ft).

New Tesla, McLaren, and Ferrari models added to Takata recall list

UPDATE: A McLaren spokesperson confirmed to Autoblog that "a number" of McLaren models in the US, Japan, and South Korea will be recalled to fix non-dessicated airbag inflators. However, the recall only affects passenger airbags, as all driver's-side inflators use a different technology and are not affected. The timeline is still being determined. It's been more than two and a half years since the Takata airbag recall first made waves. Despite knowing which airbags were at fault and the exact cause of the failure, manufacturers like Audi, Ferrari, McLaren, and Tesla have been building and selling cars with defective airbags. Although it takes several years for the airbag to degrade to the point of failure, all of these new cars will eventually have to be recalled for replacements. It appears that time has come, as the National Highway Traffic Safety Administration has now issued a recall on some of these new models. Models from Tesla and McLaren have been added to NHTSA's recall list for the first time. Tesla is recalling every 2012 - 2016 Model S while McLaren is bringing back every model it's made since relaunching its road-car business in 2012. Not even the P1 is free from failure. Other automakers have expanded their affected-vehicle list. All of Ferrari's 2016 - 2017 lineup now falls under the recall and joins a number of previously recalled models, while Audi is recalling the 2017 R8. Since the recall started, dozens of automakers have recalled millions of affected cars to replace potentially fatal and highly flawed airbags that can deploy bits of metal at occupants. Eleven deaths in the United States are directly related to the faulty airbags. Before the recall, Takata held a sizable share of the airbag market. When the failures began to occur, some automakers were left with no alternative suppliers. As it takes a few years for the airbags to fail, automakers without other options faced a choice: they could either build cars that would be recalled in the future or stop building cars altogether until a secondary supplier could be found. These recalls seem to be happening so frequently that owners may not know what to do or where to check to see if their car is potentially affected. NHTSA is keeping a comprehensive list of all affected models. Their website can help owners determine if they have a potentially problematic airbag installed and the steps to take to replace it.

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.