2010 Audi S5 Cabriolet Prestige Pkg. Loaded. 1 Owner. Clean. on 2040-cars

Auto blog

Audi rolls out new A6 L E-Tron hybrid for China

Audi is expanding its range of hybrid models with the introduction of the A6 L E-Tron at the Shanghai Motor Show. It's earmarked specifically for the Chinese market and is based on the long-wheelbase A6 L already produced there. The new E-Tron model marries a 2.0-liter turbo four good for 211 horsepower and 258 pound-feet of torque to an electric motor with 122 hp and 162 lb-ft integrated into the eight-speed automatic transmission. A lithium-ion battery pack provides 14.1 kWh power. Mounted in the trunk, it limits cargo capacity to 11.9 cubic feet. The system produces net output of 245 hp and 369 lb-ft – enough to send the long-wheelbase hybrid to 62 miles per hour in 8.4 seconds en route to a top speed of 130 mph. All the while, it'll return 106.9 miles per gallon by the Chinese standard, traveling over 30 miles on electric power alone (at speeds of up to 83.9 mph) and up to 546.8 miles without needing to stop. The A6 L E-Tron is one of three new hybrids Audi is showcasing in Shanghai this year, alongside the Q7 E-Tron and Prologue Allroad concept. Ingolstadt, 2015-04-16 The new Audi A6 L e-tron for China - First Audi plug-in hybrid model from Chinese production - Output of 180 kW (245 hp) with extremely low consumption - 50 km (31.1 mi) electric range and total range of 880 km (546.8 mi) With the A6 L e-tron, Audi is taking an important step toward even greater fuel efficiency in China. The sedan has been developed specifically for the Chinese market. Its plug-in hybrid drive with 180 kW (245 hp) provides for powerful performance. The model consumes on average just 2.2 liters of fuel per 100 kilometers (106.9 US mpg). After launching the e-tron era in China with the imported A3 Sportback e-tron* in 2015, Audi is taking the next step with the local production of the A6 L e-tron beginning in 2016. The model is based on the long version of the Audi A6, which is already built in China, and is configured as a highly efficient parallel hybrid, meaning that its two drives are arranged one directly behind the other. The 2.0 TFSI is a state-of-the-art, four-cylinder, gasoline engine producing 155 kW (211 hp) and 350 Nm (258.1 lb-ft) of torque. The disk-shaped electric motor provides 91 kW and 220 Nm (162.3 lb-ft) of torque. Together with a decoupler, this is integrated into the eight-speed tiptronic transmission, which transfers the power to the front wheels. System output is 180 kW (245 hp); maximum system torque is 500 Nm (368.8 lb-ft).

New Audi Quattro concept coming to Frankfurt?

We first saw the Audi Quattro Concept at the 2010 Paris Motor Show, and since then we've been tugged this way and that by a series of rumors as to whether the car will be built or not, and whether such a car will live at the accessible or the exalted end of the cost spectrum. A report in Germany's Auto Zeitung from June restarted the fires of gossip with a report that a production version of the concept will appear at the Frankfurt Motor Show, and put it firmly in the exalted sphere.
Now, just a month from the show, Auto Bild has a similar report, sketching out an upmarket car but on a different platform. Back when we drove it, the Quattro concept was built on a spaceframe based on the RS5 platform and got its go from a 2.5-liter five-cylinder engine with 380 horsepower and 354 pound-feet of torque (the show car got 408 hp from a turbocharged five-cylinder). The June report from Auto Zeitung said this new reveal would be powered by a modified version of the twin-turbo 4.0-liter V8 from the RS7 that would put out something like 650 hp. Auto Bild, on the other hand, reports that the engine will be tuned to something like 600 hp and the new concept will ride on an "enhanced" version of the A6 platform.
Both reports agree that the car we'll see will preview Audi's new design language with "tauter, more angular lines." Lightweight and exotic materials will be used in efforts to reach a supposed target weight of 1,200 kilograms (2,640 pounds), down from a target of 2,900 pounds in earlier report. Auto Bild says that Audi still hasn't decided whether to make a production version, but if they are correct about the direction of the concept, any retail offering based on it isn't going to be cheap.

Audi design chief Egger leaving for Italdesign Giugiaro

Wolfgang Egger, Audi's chief designer, is leaving the company according to a Automotive News Europe, which cites a report from Germany's Automobilwoche. Egger won't be going far, though, remaining within the Volkswagen family and taking up head design position Italdesign Giugiaro, a VW subsidiary as of 2010.
Egger took over the position at Audi from Walter de Silva, and has been responsible most recently for the Audi A6 and A3, as well as the 2010 Quattro Concept and the E-Tron Concept. He previously was head of design at Lancia and then at Alfa Romeo, where he was responsible for the achingly gorgeous 8C Competizione.
If Egger does move to Italdesign, his successor is likely to be Marc Lichte, the Volkswagen designer behind the current Golf. Of course, these personnel changes haven't been officially confirmed, and Audi is thus far refusing to comment on either Egger or Lichte's possible career shifts. We'll stay with this one, so sit tight.