Titanium Pkg Bang &olufsen Audio Panorama Sunroof Awd Turbo Tiptronic Low Miles on 2040-cars

Auto blog

Audi rolls out new A6 L E-Tron hybrid for China

Audi is expanding its range of hybrid models with the introduction of the A6 L E-Tron at the Shanghai Motor Show. It's earmarked specifically for the Chinese market and is based on the long-wheelbase A6 L already produced there. The new E-Tron model marries a 2.0-liter turbo four good for 211 horsepower and 258 pound-feet of torque to an electric motor with 122 hp and 162 lb-ft integrated into the eight-speed automatic transmission. A lithium-ion battery pack provides 14.1 kWh power. Mounted in the trunk, it limits cargo capacity to 11.9 cubic feet. The system produces net output of 245 hp and 369 lb-ft – enough to send the long-wheelbase hybrid to 62 miles per hour in 8.4 seconds en route to a top speed of 130 mph. All the while, it'll return 106.9 miles per gallon by the Chinese standard, traveling over 30 miles on electric power alone (at speeds of up to 83.9 mph) and up to 546.8 miles without needing to stop. The A6 L E-Tron is one of three new hybrids Audi is showcasing in Shanghai this year, alongside the Q7 E-Tron and Prologue Allroad concept. Ingolstadt, 2015-04-16 The new Audi A6 L e-tron for China - First Audi plug-in hybrid model from Chinese production - Output of 180 kW (245 hp) with extremely low consumption - 50 km (31.1 mi) electric range and total range of 880 km (546.8 mi) With the A6 L e-tron, Audi is taking an important step toward even greater fuel efficiency in China. The sedan has been developed specifically for the Chinese market. Its plug-in hybrid drive with 180 kW (245 hp) provides for powerful performance. The model consumes on average just 2.2 liters of fuel per 100 kilometers (106.9 US mpg). After launching the e-tron era in China with the imported A3 Sportback e-tron* in 2015, Audi is taking the next step with the local production of the A6 L e-tron beginning in 2016. The model is based on the long version of the Audi A6, which is already built in China, and is configured as a highly efficient parallel hybrid, meaning that its two drives are arranged one directly behind the other. The 2.0 TFSI is a state-of-the-art, four-cylinder, gasoline engine producing 155 kW (211 hp) and 350 Nm (258.1 lb-ft) of torque. The disk-shaped electric motor provides 91 kW and 220 Nm (162.3 lb-ft) of torque. Together with a decoupler, this is integrated into the eight-speed tiptronic transmission, which transfers the power to the front wheels. System output is 180 kW (245 hp); maximum system torque is 500 Nm (368.8 lb-ft).

Audi A7 Sportback H-Tron Quattro packs plug-in hydrogen powertrain

If you think a plug-in diesel hybrid is an expensive proposition, just wait until you hear details about the just-revealed Audi A7 Sportback H-Tron Quattro. The "H" in H-Tron, as you might guess, stands for hydrogen, so say hello to a new concept that combines a plug-in battery system with a hydrogen fuel cell. Yeah, exactly. Let's start with the numbers. On the plug-in side, the new H-Tron has an 8.8-kWh lithium-ion battery that can power the car for up to 31 miles on battery power. With electric motors on both axles – it's a Quattro, after all, but a through-the-road hybrid with electronic torque distribution management – the A7 H-Tron uses a hydrogen fuel cell and four (!) H2 tanks to offer about 62 miles per gallon equivalent. Audi says the overall fuel cell stack efficiency is "as high as 60 percent" while the electric motors operate at 95 percent efficiency. Efficiently turning all of that electricity into movement means the A7 Sportback H-Tron Quattro has a total power output of 398.3 pound-feet of torque. The 4,299-pound concept can allegedly go from 0-62 miles per hour in 7.9 seconds and has a top speed of 112 mph. The car's total range is 311 miles. The A7 H-Tron is not the first plug-in hydrogen vehicle concept. That title goes to the Ford HySeries Edge. Mazda also considered putting a hydrogen range extender in the Mazda5 plug-in van. The Audi A7 Sportback h-tron quattro It sprints from 0 to 100 km/h (62.1 mi) in 7.9 seconds and on to a top speed of 180 km/h (111.8 mph). It covers over 500 kilometers (310.7 mi) on one tank of fuel – and its exhaust emits nothing more than a few drops of water: The A7 Sportback h-tron quattro, which Audi is unveiling at the Los Angeles Auto Show 2014, uses a powerful, sporty electric drive with a fuel cell as its energy source that operates in combination with a hybrid battery and an additional electric motor in the rear. The overall electrical system power of 170 kW is transferred to both the front and the rear wheels. This drive configuration makes the emission-free Audi A7 Sportback* a quattro through and through – a new departure in fuel cell cars. "The A7 Sportback h-tron quattro is a genuine Audi – at once sporty and efficient. Conceived as an e-quattro, its two electric motors drive all four wheels," explained Prof. Dr. Ulrich Hackenberg, Member of the Board of Management for Technical Development at Audi. "The h-tron concept car shows that we have mastered fuel cell technology.

Production 4.0: Audi plans for the smart factory

Automotive production is becoming more integrated and at the same time has to be more intelligent and more efficient. Flexible production of customized vehicles is one of the big challenges for the future, especially for a premium carmaker like Audi. How will the "Vorsprung durch Technik" brand meet its aim of offering premium quality with added custom flexibility? The company sees the "smart factory" as the key. Whether it's body-color moldings or light-alloy wheels in a special size, almost every car is ordered with some kind of customization, and the demands are increasing. This requires of course already a lot of flexibility. While the variety of models and quality demands are increasing, automotive manufacturers such as Audi are eager to make production sustainable. In an Audi interview, innovation management members Alois Brandt and Henning Loser talk about "production 4.0" and the upcoming "smart factory." How will Audi manage the production site with its very high standards of quality, efficiency, and environmental acceptability? Will the so-called "smart factory," which should be the intelligent factory of the future, only employ robots? Alois Brandt: "With a deep look into the production, I am convinced that our employees and not machines are the relevant working forces behind the Audi brand. Machines can be bought anywhere." Increasing digitalization is paving the way for the smart factory – the intelligent, digitally connected production facility. New high-tech solutions in manufacturing should further increase the high level of quality, while at the same time the assembly work should be easier and result in better ergonomics. Can you give us a clearer imagination of the "smart factory"? Alois Brandt: "There are a lot of ideas. But the big question at the moment is: Which one is really needed and leads into the right direction?" Can you tell us a little bit more about "production 4.0"? Alois Brandt: "The assembly line as we know it in the present will no longer play the same role. If it makes sense, it will be terminated and replaced by – let's call it – a virtual assembly line. The production will be more modular than before and the car will be directed to a production point – a so-called 'island of competence' – where it is needed." Henning Loser: "If the vehicle is to be assembled to the customer's wishes, it is obvious that efficient programming of robots and coordinating with the human workers is needed.