Evansville Ford Service on 2040-cars

Auto blog

Infiniti Q50 Red Sport 400 priced at $48,855, AWD at $50,855

Infiniti's most powerful production model, the new Q50 Red Sport 400, now has a starting price. You'll need at least $48,855 for the rear-drive model or $50,855 for all-wheel drive. (Both figures include the $905 destination charge.) A fully loaded, rear-drive Q50 RS400 with Direct Adaptive Steering, navigation, adaptive cruise control, a heated steering wheel, and Infiniti's entire alphabet soup of safety equipment, tops out at $57,045. (Again, add $2,000 for AWD). When it comes to rear-drive competition, the closest base price to the Q50 is the 320-hp BMW 340i. This German undercuts the Infiniti by two grand, $46,795 to $48,855. But the BMW outprices the Q50 as soon as you start selecting options. A 340i with similar equipment to a loaded Q50 Red Sport 400 costs just under $60,000. All-wheel-drive German competitors also lose out in the price war. Like with the rear-drive models, the BMW 340i xDrive undercuts the Q50 RS400 by around $2,000. Add the options, and the Infiniti becomes a better value. The other two big German rivals, the Audi S4 and Mercedes-Benz C450 AMG start at a higher price and only get more expensive. Technically the S4 starts cheaper than the Q50, but only with the standard manual transmission. Selecting the S-Tronic dual-clutch model kicks the price from $50,125 to $51,125, and going for the top-end Prestige trim will bump potential Audi owners up to $57,025. Throw on must-have S4 options, including adaptive cruise control, adaptive dampers, and a sport differential and you'll be shell out $64,425 for the Audi. The Mercedes-Benz C450 AMG is the priciest choice in this group, starting at $51,725, or roughly $900 more than a base Q50 RS400 with AWD. Options, again, are the downfall here. Building a C450 to match a loaded Infiniti will drive the Mercedes' price up to $64,315. While it occupies something of a weird space relative to these vehicles, it's also worth mentioning the Cadillac CTS VSport. It's the only car in this impromptu pricing comparo that can outgun the Q50, with its 3.6-liter, twin-turbo V6 good for 420 hp and 430 lb-ft of torque. It also starts at $60,950, although that includes plenty of standard equipment. All this means that the Q50 Red Sport 400 represents a relative value. It packs more power than the Germans – 80 more than the 340i, 67 more than the S4, and 38 more than the C450 – and a more comprehensive list of options, too.

Audi may add plug-in hybrid A6, A8 and Q7 to range [w/poll]

Audi could be getting even more diverse with its powertrains for the A6, A8 and Q7, moving beyond offering just gas- and diesel-powered models and adding plug-in hybrid variants of the three luxury vehicles. The report comes from Indian Autos Blog, which spoke to Dr. Ulrich Hackenberg, Audi's research and design chief, who confirmed the PHVs.
The next-generation Q7, due in 2015, will be the pioneer for the full-size PHV movement from Audi, although the A3 Sportback E-Tron (shown above) will precede it. The move toward plug-ins by Audi is a big step, as the German marque has stayed quite firmly in the diesel camp, outside of its racing efforts. It's developed a few E-Tron cars over the years, including a version based on the R8, although it wasn't until recently that production of the electric sports car became serious again.
It's believed that this hesitance to really dive into the PHV market is why Audi sacked former research and design boss Wolfgan Dürheimer, with IAB speculating that his approach was too conservative.

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.