2021 Alfa Romeo Stelvio Ti Awd on 2040-cars

Auto blog

Alfa CEO says 4C can manage more power

With 240 horsepower from a 1.75-liter engine, the Alfa Romeo 4C does a lot with very little. But there's always room for improvement, says the company's CEO. Speaking with Automotive News, Alfa Romeo chief Harald Wester indicated that the historic Italian auto marque could squeeze more out of the 4C's already high-strung engine. "We are only at 134 horsepower per liter," said Wester, "so there is space" for it to produce yet more power. To accommodate the extra muscle, Wester says, the Alfa would also need bigger brakes, but the chassis may already be as stiff as it needs to be. Considering that Mercedes gets 355 horsepower out of the 2.0-liter turbo four in the A45, CLA45 and GLA45 AMG (for a specific output of over 177 hp per liter), Wester may be right, opening the door for a 300hp version with a 0-60 time of around four seconds flat. And his saying so more than subtly suggests the possibility of a more powerful 4C becoming a reality. But then the prospect of shoehorning a bigger engine into the same chassis to make a new Maserati GranSport - another prospect which Wester (also CEO of Maserati) suggested earlier in the 4C's development - never came to pass, largely due to engineering roadblocks. Featured Gallery 2015 Alfa Romeo 4C: First Drive View 57 Photos News Source: Automotive News - sub. req.Image Credit: Copyright 2014 Matt Davis / AOL Alfa Romeo Coupe Performance alfa romeo 4c alfa 4c

Alfa Romeo planning a four-cylinder, 350-hp Giulia Veloce?

At the moment, Alfa Romeo sells a 2.0-liter, turbocharged four-cylinder Giulia with 280 horsepower for $37,995, and a 2.9-liter, twin-turbo six-cylinder Giulia Quadrifoglio with 505 hp for $72,000. A vacuum separates those poles, and the marketplace, echoing nature, hates it. Some recent Internet sleuthing in The Netherlands and in the U.S. might have identified a suitable object to fill that void: a 350-hp version of the 2.0-liter turbo. Last December, Dutch shop Squadra Tuning discovered an entry on Fiat Chrysler's Dutch-market parts site for a 2.0-liter turbo Giulia producing 350 metric horsepower (345 U.S. ponies). Not long after that, an Autoevolution reader submitted an image of an FCA document for the NAFTA region, which listed a 2.0-liter, 350-hp model for the USA equipped with the eight-speed automatic and all-wheel drive. The name of the model powered by that engine: "Giulia Veloce." Certain international markets already offer a Veloce trim with an auto transmission and all-wheel drive, but engine choices are the 280-hp 2.0-liter we already get, and a 2.2-liter turbodiesel we don't get. If those overseas discoveries were merely smoke, conjecture took a huge step toward fire a few days ago when Bozi Tatarevic found a 2.0-liter, 350-hp engine option on Mopar Tech Authority, FCA's OEM service portal. Car and Driver asked Alfa Romeo for clarification, the carmaker responding, "No plans for any other engines for Giulia in North America for 2018 model year besides the 2.0L and 2.9L [gasoline] versions." Having ruled 2018 out, onlookers have turned their eyes to 2019 for the introduction of this 350-hp motor. What's more, a comment on Tatarevic's tweet sends speculation into 48-volt overboost. Twitter user Rob P replied, "This is pretty well established as happening. MY2019, USA only. 280hp + 48V electrical system + elec. assisted turbo = ~350bhp 'Veloce' in USA nomenclature." No matter how the horses are made, assuming 350 cavalli make it across the Atlantic, Alfa's lineup will profit from the addition: Buyers in the sport sedan segment would get some Italian sprezzatura to cross-shop against German Monumentalitat. Related Video: News Source: Bozi Tatarevic / Twitter via Road and Track Rumormill Alfa Romeo Luxury Performance Sedan FCA alfa romeo giulia 48-volt system giulia

Vintage 1921 Alfa Romeo G1 rally car hits RM Sotheby’s

The only known surviving, fully operational example of Alfa Romeo's first commercial car is hitting the auction block at RM Sotheby's at its auction in Phoenix next month, when the 1921 G1 is expected to fetch up to $1.5 million. It's one of only 52 examples, including two prototypes, built between 1921 and 1923, and the only known surviving member of the series, stamped chassis No. 6018. It spent many years on a remote farm in Australia, during part of which the engine was put to work powering a water pump, before undergoing a restoration sometime in the mid-1960s. The G1 is powered by a 6.3-liter side-valve inline six that was said to have been designed with input from Enzo Ferrari, then a driver for the company, and was the largest motor ever fitted to an Alfa. It was based on two cast-iron three-cylinder blocks with fixed cylinder heads, a cylinder bore of 98 millimeters and a stroke of 140 mm to make 71 horsepower and 216 pound-feet of torque, with a top speed of 86 mph. It has a four-speed manual gearbox, which sends power to the rear axle through a single-dry plate clutch and an open driveshaft. The G1 was built to support Alfa Romeo's racing activities and was marketed to the same upscale clientele as Rolls-Royce, Hispano Suiza and others. A stripped-down version of the car won its production class at the Coppa del Garda, according to RM Sotheby's, but the production version suffered for being an expensive fuel guzzler at a time of economic and political chaos in Italy following World War I. So the company exported all 50 production versions to Australia (and possibly to South Africa), where this one was picked up by a Queensland businessman, who later went into bankruptcy and sent the car to a farm in the Outback to hide it from creditors. Ranch workers reportedly found it in the late '40s and used it as a farm runabout before the rear axle failed and the engine was used for the water pump. The remains of the G1 were acquired by a man named Ross Flewell-Smith, who would restore it over 10 years, including finding authentic replacement parts. It would undergo three full restorations in subsequent years.Related Video: