Alfa Romeo Spider on 2040-cars

Auto blog

2023 Alfa Romeo Giulia and Stelvio tweaked outside and in

Another Stellantis brand has hopped on the streamlining craze, this time Alfa Romeo. The Italians from Turin dropped info on what's coming to the 2023 Giulia sedan and Stelvio crossover for international markets, the best bits likely destined for our market as well. After introducing new brand hallmarks on the Tonale, the Giulia and Stelvio adopt the revised Trilobo grille and three-section full-LED headlights. You'll need look closely to see the grille differences, but there's a touch more depth and sculpting around the edges. The headlight changes are easier to spot, the "3+3" inspiration coming from the SZ and Brera, which predate the Tonale. The headlights also come with automatic high beams. Other shores that can have fancy lights get the Adaptive Matrix high beams that automatically adjust beam contours so as not to blind oncoming traffic. Yes, the National Highway Traffic Safety Administration cleared the mechanics of such lights for use in the U.S. in February of this year, but U.S. laws stipulate a lower maximum brightness than allowed in other markets. We'll see if the matrix system makes it here. The taillights don't appear to have changed, their covers have. The Giulia gets transparent glass taillight covers, the Stelvio gets smoked glass. There could be some illumination tricks front and back, too. We're used to seeing sequential turn signals in back, spy shots have shown a sequential turn signal pattern in the headlights, and Alfa says there's a "'Welcome and Goodbye' device that turns on every time the driver closes or opens the car."  Every trim features a 12.3-inch digital instrument panel that comes with three themes. The Heritage theme recalls the analogue gauges on vintage Alfas, with some upside down numbers on the analogue-looking speedo, a minimalist tachometer and a digital facsimile of the old school odometer with rolling numbers. Evolved "represents the future of Alfa Romeo design," placing most information in the center, the circular areas at the edges containing sweeping needles for the speedo and tach, but no numbers in the 'dials.' Relaxed puts nearly everything in the center, putting vitals like fuel level and oil temperature at the sides. Trim levels will be reorganized into two primary levels and two options levels. The basic tiers are Super, the entry-level, and Ti.

Alfaholics built an Alfa Romeo 105 Series entirely out of carbon fiber

Alfaholics has restored numerous 105 Series cars before. And Alfaholics has used carbon fiber parts before. But this is the first time Alfaholics has built a 105 Series with a body made entirely out of carbon fiber. The United Kingdom-based builder and parts supplier debuted the carbon shell this month and will make it available as an option for future projects. It's called the GTA-R 300. Alfaholics is a all-encompassing Alfa Romeo 105 Series (also known as the Giulia) parts supplier, customization shop and restoration specialist run by Alfa enthusiasts Richard, Max and Andrew Banks. The company has become known for its GTA-R builds, which are part of its R-Type program that Alfaholics says is "reserved for our most exclusive restorations which represent the ultimate evolution of the Alfa Romeo 105 Series." Human hands spend more than 3,000 hours building GTA-R coupes (or Ti-R sedans or Spider-R convertibles), and everything can be customized to the client's demands.  Customers are presented with a massive book of options, including choices of engines, gear ratios, suspension packages, damper valving, power steering, seat styles, upholstery, interior lighting, roll cages, dashboard styles, car audio and infotainment, and much more. Up until this point, clients did have the option for carbon fiber parts, but the choices were limited to the hood, the doors, and the rear deck lid. Now buyers can opt for a full carbon fiber kit. The GTA-R 300 gets its name due to its power-to-weight ratio. It's about 84 pounds lighter than the previously range-topping GTA-R 290 and about 154 pounds lighter than a GTA-R constructed entirely out of steel. All said, Alfaholics says the GTA-R 300 has a power-to-weight number of 300 bhp per ton, but it did not provide a specific weight number for the car, as it is not yet completed. Alfaholics does say this build will also include many other lightweight parts such as the Alfaholics GTA-R Ultraleggera billet titanium suspension package. For more information on other current and completed builds, visit Alfaholics.           View this post on Instagram                   Alfaholics GTA-R 300 Carbon Full carbonfibre body conversion, 70kg weight saving over a steel GTA-R.

Alfa Romeo could reportedly bring Sauber F1 tech to its road cars

In the summer of 2018, Alfa Romeo laid out its five-year plan, only weeks before former Fiat Chrysler Automobiles (FCA) CEO Sergio Marchionne passed away. Alfa ambitiously projected several new vehicles of various shapes, sizes and performance levels but gave only vague details. A new report from Piston Heads adds a layer of color to the timeline, suggesting one or more of these upcoming rides could feature influence from Alfa Romeo's Formula 1 partner Sauber. PistonHeads.com recently had the chance to chop it up with Sauber Team Principal Frederic Vasseur at the F1 pre-season sessions in Barcelona, where Alfa Romeo and Sauber were testing out their just-unveiled 2019 car. According to the brief conversation, Alfa and Sauber have collaborations in the works beyond the paddock. "We are already working on another project together and you will see the result quite soon," Vasseur told PH. "It's a huge opportunity for us, but it will involve only the guys at the factory in Switzerland, as the trackside guys are focussed on the racing." Vasseur later tipped that they might have several projects in development. Without any more details, there's a lot of room for speculation, so let's quickly unpack what Alfa has already admitted to be planning. In addition to two new SUVs that will launch in the upcoming years, the performance-minded Italian brand said it would resurrect two well-known and highly desirable nameplates: 8C and GTV. Both cars will reportedly be hybrids, with the 8C serving as a halo mid-engined supercar, while the GTV will essentially be a Giulia coupe, complete with an eventual Quadrifoglio variant. Considering how great and high-powered the current Giulia and Stelvio Quadrifoglios already are, it seems unlikely these projects would deal with those current models. It's possible Sauber is helping Alfa Romeo with the GTV, as previous reports suggested the two-door will have F1-derived technology, but it is unclear if the coupe is coming "quite soon." It's also possible that Sauber is collaborating with Alfa on all of its upcoming performance electrification and hybrid technology. For now, it's a guessing game, but if the reports are accurate, we won't have to wait much longer to learn more. News Source: Piston Heads Rumormill Alfa Romeo Crossover Racing Vehicles Performance Sedan F1