2010 Black Acura Tsx Automatic With Heated Leather, Moonroof & Gold Paint on 2040-cars

Auto blog

2019 Acura ILX gets a makeover with more standard safety features

The 2019 Acura ILX compact luxury sedan has finally been redesigned to fit the look introduced by the TLX and RDX. According to Acura, the entire nose from the A-pillar forward and the whole rear fascia have been changed. Up front the car has the pentagonal grille and angry LED lights that are Acura signatures, and they're complemented by crisply creased sheetmetal across the rest of the car. The results are a far sportier, far less anonymous machine. The car will continue to be available in normal and A-Spec versions, with the latter consisting mainly of appearance items such as 18-inch wheels, dark trim and lights, and a rear spoiler. Exterior enhancements are the primary change to the new ILX. The interior is nearly unchanged except the A-Spec has some stylish sport seats similar to those in the RDX A-Spec. Acura also says the infotainment system has been upgraded to be faster, and it has fresh graphics and Apple CarPlay and Android Auto compatibility. But this is not the system found in the completely new RDX, just an updated version of the current infotainment. The last big upgrade to the ILX is the inclusion of the complete AcuraWatch suite of safety features on all ILX models. This includes automatic emergency braking, lane-keep assist, adaptive cruise control and road departure mitigation. Aside from these changes, the ILX is still pretty much the same as the old one. Under the skin is the same naturally aspirated 201-horsepower 2.4-liter four-cylinder as the current model. It's still coupled to an eight-speed dual-clutch automatic transmission and powers solely the front wheels. The 2019 ILX goes on sale in October, but pricing has not yet been announced. Related Video:

Acura announces NSX GT3 Evo22 race car will live on

The Acura NSX may be winding down production in 2022, but it still has some life left on the track. Today, Acura announced that it will introduce a new version of its NSX GT3 race car. It features a slew of improvements that should make the platform more competitive. Called the NSX GT3 Evo22, it builds upon the existing NSX GT3 a car that has won multiple championships in IMSA, SRO and Japan's SuperGT. The Evo22 gets improved intercoolers for the 3.5-liter twin-turbo shared with the road car, allowing it to perform consistently in a wider range of conditions and locations. Underneath, the suspension earns some tweaks in revised spring rates and geometry adjustments. To improve the car for endurance racing, the Evo22 reduces pit time with larger fluid tanks, while a revised wheel system allows for quicker tire changes. An FIA-mandated rain light illuminates the rear. Acura will also offer several air conditioning and headlight options. As with the outgoing NSX GT3, the Evo22 eschews the road car's hybrid and all-wheel-drive systems. Instead, it employs an XTRAC semi-automatic six-speed sequential transmission to send power to the rear wheels. Both the race and road car, however, share the same specs for the engine block, heads, valvetrain, crankshaft, pistons, and dry-sump lubrication system. The motors and chassis are both built at Acura's Performance Manufacturing Center in Ohio, while final assembly for the GT3 takes place in Milan, Italy. While European GT3s are supported from Italy, Honda Performance Division in Southern California will support North American teams. The NSX GT3 is the defending IMSA GTD and SRO GT Manufacturers’ Champion, and has achieved 25 IMSA and SRO class wins since its North American introduction in 2017. Interestingly, Acura says the the NSX GT3 is homologated globally through 2024. So, while new road cars won't be produced after next year, you'll still see them representing the "A" calipers at the track beyond that.

New TLX A-Spec leads Acura's three-car Pike's Peak attack

Once again, Acura is headed to Pikes Peak for the hillclimb on June 25 with a small group of machines. This year the focus is on the TLX, with two vehicles bearing the sedan's name and shape. The two cars are very different, though, and will compete in two different classes. The first is the TLX A-Spec. This started life as a production TLX, but the 3.5-liter V6 has been reworked with pistons, rods, camshafts, and a valvetrain from Acura's TLX GT race car. The engine also has a turbocharger, which helps the V6 make an impressive 500 horsepower. All those ponies go to the front wheels through a limited-slip differential. In addition to the powertrain upgrades, the interior has been gutted, and a big wing and front splitter fitted. The A-Spec will compete in the Pikes Peak exhibition class. The other TLX is a TLX GT. This is the type of car from which the A-Spec borrows engine components, but not the TLX GT's twin-turbocharger system. TLX GTs have already been competing in motorsports, specifically in the Pirelli World Challenge. Acura did make some changes to this car for Pikes Peak, though. The suspension and engine computer have been tweaked, gear ratios shortened, and additional aerodynamic bits added for more downforce. The TLX GT will compete in the open class. Despite the focus on the TLX, Acura is still bringing an NSX to the hill climb. This car is similar to the one that raced in the Time Attack 1 class last year, but has some changes for the Time Attack 2 class. Most notable of these changes are the massive rear wing and front splitter. According to Acura, these aerodynamic aids were based on those used for the NSX GT3 race car. Acura also reduced weight, changed the tuning on the engine computer, and fitted sticky R-compound tires. Related Video: Featured Gallery Acura Pikes Peak race cars View 9 Photos Image Credit: Acura Motorsports Acura Coupe Racing Vehicles Sedan acura tlx acura tlx gt