2008 Acura Mint Condition on 2040-cars

Auto blog

Honda recalling 183k cars and crossovers over unintended braking issue

A recall has been issued for nearly 183,000 Honda and Acura brand vehicles from the 2005 and 2006 model years. The problem stems from a potential malfunctions to the vehicles' stability control and braking systems.
Drivers have reported a malfunction to Honda's Vehicle Stability Assist system, though to date, no crashes or injuries have been reported as a result of it. Some of the vehicles' Vehicle Stability Assist (VSA) control units may have an electric capacitor that was damaged during manufacture. A damaged control unit could cause the VSA system to apply brake force for a "fraction of a second" without any driver input, or could add additional brake force if it malfunctions while the driver is already braking. Either example could increase the risk of a crash.
To fix the issue, Honda will install a new electrical sub-harness, free of charge to the owner. The recall specifies 101,000 Honda Pilot (pictured), 60,000 Acura MDX and 21,000 Acura RL vehicles from the 2005 model year will be affected. An additional 800 MDX crossovers from the 2006 model year are also included in the recall. In addition, 51,000 of the affected 2005 Pilots will be inspected to be sure that a ground bolt for the VSA system is properly tight. Should this bolt come lose, similar unexpected brake activation may occur.

Hondata's 2019 Acura RDX tune brings the mid-range torque

One of the big advantages to the era of turbo Hondas is that there's plenty of horsepower and torque left on the table for tuners to take advantage of. One of those companies is Hondata, and following its upgrades for the Civic and Accord, it's now tuning the Acura RDX luxury crossover. The RDX uses a turbocharged 2.0-liter engine similar to those in the Accord and the Civic Type R. In stock form, it makes 272 horsepower and 280 pound-feet of torque. With Hondata's Stage 1 tune, the company says that horsepower increases by about 10 across the rev band. Looking at the dyno graph, it also appears that peak horsepower increases by about 5 horsepower, and peak torque is up by about 15 pound-feet. Peak torque also appears to arrive sooner, and most of the torque curve seems to be up by 10 to 15 pound-feet. The increases in power and torque are available in all four of the RDX's drive modes. The Stage 2 tune increases power torque even more in Sport and Sport+ modes, and keeps Snow and Comfort modes at Stage 1 settings. Peak horsepower looks to be up about 10 over stock, but the mid-range sees as much as a 28-hp increase. Peak torque sees a huge jump of about 45 lb-ft over stock based on the dyno chart, and it's available even lower than the Stage 1's peak torque. If this all sounds good to you, you can order up a Hondata FlashPro computer for your RDX right now. It costs $695 and comes with the handheld computer for uploading or removing tunes. RDX owners in California should note that neither tune is currently CARB legal. Related Video:

Acura NSX production delayed

Listeners of the Autoblog Podcast will be familiar with my opinions on the Acura NSX. While I love the idea of Acura building a halo car again, I've routinely joked on-air that the car will never, ever reach production and will continue being teased and previewed ad nauseam. So I'm chuckling at this news: the NSX is being delayed again. To be fair, while it sounds like a big deal – pushing the NSX back from model year 2016 to 2017 – this is a fairly minor delay in the grand scheme. Instead of starting production this fall, as previously announced, the new supercar will start rolling down the line at Honda's Marysville, OH factory in the spring. "Trial production" has already started, Honda says, while briefly acknowledging the delay in the attached press release. While Honda offered no reason for the delay in volume production, Automobile claims it's the fault of the move to fit two turbochargers to the V6, which was made midway through development. Fitting the two iron lungs meant rearranging the six-pot into a longitudinal layout. Here's hoping there are no further delays. Scroll on for a look at Honda's press release, which does its best to gloss over the NSX delay while talking about the company's new Performance Manufacturing Center in Marysville. Related Video: Performance Manufacturing Center: Precision Craftsmanship Aug 14, 2015 - CARMEL-BY-THE-SEA, Calif. The next-generation Acura NSX is produced at the new, dedicated Performance Manufacturing Center (PMC) in Marysville, Ohio, using domestic and globally sourced parts. With trial production already underway and production start-up scheduled for spring 2016, this world-class manufacturing facility employs groundbreaking techniques in weld, body construction, body painting, final assembly and quality confirmation to ensure the highest levels of precision and craftsmanship. More details on the unique and innovative manufacturing processes at the PMC will be rolled out over the months leading up to the start of production, but the following highlights of the new facility were shared during the 2015 Monterey Automotive Week: Innovative blend of people and technology: throughout the PMC, NSX production is centered around the skills of approximately 100 experienced engineers and technicians building the NSX to precise levels of quality and craftsmanship.