2007 Acura Tsx Navigation Leather Moonroof 84,000 Miles Spoiler Super Clean Car on 2040-cars

Auto blog

A smoother operator | 2017 Acura MDX Sport Hybrid First Drive

There's a lot to unpack when trying to understand the 2017 Acura MDX Sport Hybrid. Acura is billing it as a three-row crossover infused with NSX technology via a sport-oriented hybrid drivetrain. So it's a hybrid crossover, sure. But it doesn't comport itself like a traditional crossover, nor is it a conventional hybrid. What it is, underneath, is an intentionally subtle blend of impressive technologies doing their best to appear transparent – and it's too subtle, I fear, to be appreciated by those who'd like it the most. This is a lot of foreshadowing, but if you're not familiar with the MDX Sport Hybrid's powertrain, let's fill you in. The MDX Sport Hybrid uses the same basic system as the 2014 RLX Sport Hybrid, with some newer NSX battery tech sprinkled in, packaged neatly into the refreshed third-generation MDX platform. The system improves handling and efficiency – but more important, it smoothes out the harshness of shifts and engine stop-starts. We do need to examine the system in some detail to understand how all this affects the MDX as a whole, so let's go toe to tail. Up front is a transversely-mounted 3.0-liter V6 making 257 horsepower and 218 pound-feet of torque, as well as featuring i-VTEC and cylinder deactivation. It's slightly smaller than the 3.5-liter V6 found in the conventional MDX and many other Honda and Acura products. Attached alongside is a Honda-produced 7-speed dual-clutch transmission that has a 47 hp, 109 lb-ft electric motor-generator stuffed inside. Amidships are the battery pack and the electronics to control it, and stretching aft from there are large cables feeding power to a pair of electric motors that reside in single housing, one for each wheel. Together, they produce electron witchcraft and torque-delivery wizardry – and add 72 hp and 108 lb-ft of torque to the mix. The total system output is 321 hp and 289 lb-ft of torque – a gain of 31 hp and 22 lb-ft over the conventional MDX SH-AWD. Beyond the raw numbers, there's the remarkable subjective benefit of the Sport Hybrid's drivetrain. Engine start-stop events are quiet and smooth, nearly imperceptible when under way – in stark contrast to the too-perceptible shudder of competing engines kicking on. The electric motors (mainly the one residing in the transmission) add in power to make up for the lull during a shift, making shifts up or down seamless, as well as providing regenerative capacity.

Hurricane Sandy cost automakers 15,000 vehicles, may have ruined up to 200k

Hurricane Sandy was the largest Atlantic storm in US history, and its total economic impact is just now coming into view. According to Automotive News, Toyota, Chrysler, Nissan and Honda are set to scrap around 15,000 new vehicles ruined by the storm. Nissan alone accounts for about 40 percent of those, with 6,000 Nissan and Infiniti models deeded "un-saleable" due to damage. The company saw 56 dealerships shuttered due to the storm, but 51 of those have since reopened.
Toyota, meanwhile, had some 4,000 vehicles at its Newark port facility, and of those, 3,000 may be scrapped. An additional 825 were dealer inventory when they were ruined. Honda and Acura dealers are reportedly sending 3,440 vehicles to the salvage yard. By comparison, Chrysler weathered the storm fairly well with 825 units destroyed, while Hyundai suffered only 400 lost units and Kia scrapped around 200.
As you may recall, Fisker also suffered some losses, and Automotive News reports the manufacturer saw 320 Karma models damaged beyond repair. Ford and General Motors have yet to come up with estimates, and no automaker has commented on the full cost of replacing the vehicles.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.