Nav Auto Type-s Acura Tl Type S Low Miles Sunroof Leather Gasoline 3.5l Sohc on 2040-cars

Auto blog

2017 Acura NSX First Drive [w/video]

The 2017 Acura NSX is heavy. It outweighs the original 1990 car by more than 800 pounds and is over 300 heavier than a Chevrolet Corvette Z06. The NSX is insanely complicated, with an assist motor between the twin-turbo V6 and the nine-speed dual-clutch transmission, plus two torque-vectoring electric motors at the front axle. And the NSX is expensive. It will probably cost $170,000 when it goes on sale in Spring 2016. Commence trolling. If you hadn't guessed, the new NSX isn't much like the first generation built from 1990 to 2005. But the two cars share a common philosophy. Both are Acura's interpretation of what a modern, everyday supercar should be. Based on the new car, things have changed a lot in the last 25 years. For project leader Ted Klaus, the original NSX was one reason he started working at Honda. At the 1990 Detroit Auto Show, "I sat watching that car for a while. A really long while. Even just looking at that car I could see the deep, advanced, functional beauty." The most difficult thing with the new NSX, says Klaus, is to explain how a heavier and more complicated car can outperform other cars in a way that feels like traditional lightweighting. View 33 Photos This is not the way the NSX was supposed to be at first. The original plan was a transverse-mounted, naturally aspirated engine just like the first car. The NSX has a giant bag of neat tricks, but to understand them takes a lengthy explanation that starts with the Sport Hybrid SH-AWD powertrain. Behind the cockpit is a 75-degree, twin-turbocharged, 3.5-liter V6, made specifically for the NSX. On its own it puts out 500 horsepower and 406 pound-feet of torque. The rest of Honda's lineup uses a 60-degree layout, but the wider angle here lowers the center of gravity. Behind the engine is the rear assist motor, with 47 hp and 100 lb-ft. Hanging off the rear of that is the nine-speed dual-clutch, developed in-house. In between the front wheels is the Twin Motor Unit (TMU), a pair of 36-hp, 54-lb-ft electric motors that add or subtract forces to their respective sides. The Power Drive unit manages the electronics, and sits in the center spine of the car like a traditional prop shaft. A lithium-ion battery pack is behind the pair of seats, on the cold side of the firewall. Total system output is 573 hp and 476 lb-ft. This is not the way the NSX was supposed to be at first. The original plan was a transverse-mounted, naturally aspirated engine just like the first car.

Toyota tops Consumer Reports best, worst used car values

We often mock Toyota for building boring, soulless cars, but a new study by Consumer Reports suggests that regardless of whether that's true, the company has some of the best used cars on the market. In its report on used cars from 2004-2013, the Japanese automaker had 11 vehicles among its brands on the list - more than any other automaker.
CR breaks the list down by cost and vehicle size, and Toyota has at least one entry at every price point and in nearly every segment. To score a recommendation, a vehicle had to perform well in the magazine's initial tests and score above-average reliability results. It also tried to only suggest cars with electronic stability control. Of the 28 recommended vehicles, Honda/Acura had the second most mentions at six, and Ford, Hyundai and Subaru managed two each.
The Detroit brands also made it to the list, but not in a positive way. Consumer Reports compiled a list of 22 vehicles it wouldn't recommend because "they have multiple years of much-worse-than-average overall reliability." General Motors had the most unrecommended models on the list at six, but Chrysler and Ford weren't far behind, with five cars each from their brands not making the grade. The full list of recommendations is available on CR's website.

Acura confirms more 2016 NSX details

Acura served up a slew of engineering details about the soon-to-launch 2016 NSX. Fittingly, they were explained at a dinner at the SAE International World Congress in Detroit, where morsels about the new Acura supercar were likely gobbled up quicker than the main course. Among the highlights: The NSX will mark Acura's first use of a multimaterial space frame, and it includes high-strength steel and aluminum. This will allow the NSX to hit its weight targets, while maintaining rigidity. The NSX uses a so-called "ablation" technology, which allows the ultra-rigid castings to be used within the car's crush zones. For more details on this, scroll through the press blast below. As expected, the NSX will pack a twin-turbo V6 engine, and Acura confirmed it will displace 3.5 liters. The unit will be mounted amidships and team with hybrid components to increase performance and efficiency. The supercar also features the most advanced evolution of Acura's Super Handling All-Wheel-Drive system, and it's capable of distributing more torque than any other setup the brand has used. The NSX has 10 air-cooled heat exchangers that will cool the powertrain, and the V6 alone will have three radiators. There are also twin intercoolers in the side air intakes that further cool the system. The next generation of the NSX was unveiled in January at the Detroit Auto Show, and production launches this fall in Ohio. Related Video: New Technical Details of the Next Generation Acura NSX Revealed at SAE 2015 World Congress and Exhibition . DETROIT, April 23, 2015 – In advance of the market launch of the highly anticipated next generation Acura NSX, the engineers leading the supercar's development shared new technical details and design strategies with the automotive engineering community at the April 22nd SAE Detroit Section dinner, held in conjunction with the SAE 2015 World Congress and Exhibition. Additional information about the team's efforts to achieve a true "New Sports Experience" included details of the NSX's world's first body construction process that helped create a multi-material space frame resulting in class-leading body rigidity, the advanced total airflow management system and an update on NSX's power unit specifications. Ted Klaus, chief engineer and global development leader of the new NSX, introduced key powertrain, body and dynamic performance engineers who shared new product and technical details in their related areas of the development.