Leather Low Miles Bluetooth Automatic Factory Warranty Off Lease Only on 2040-cars

Auto blog

Hurricane Sandy cost automakers 15,000 vehicles, may have ruined up to 200k

Hurricane Sandy was the largest Atlantic storm in US history, and its total economic impact is just now coming into view. According to Automotive News, Toyota, Chrysler, Nissan and Honda are set to scrap around 15,000 new vehicles ruined by the storm. Nissan alone accounts for about 40 percent of those, with 6,000 Nissan and Infiniti models deeded "un-saleable" due to damage. The company saw 56 dealerships shuttered due to the storm, but 51 of those have since reopened.
Toyota, meanwhile, had some 4,000 vehicles at its Newark port facility, and of those, 3,000 may be scrapped. An additional 825 were dealer inventory when they were ruined. Honda and Acura dealers are reportedly sending 3,440 vehicles to the salvage yard. By comparison, Chrysler weathered the storm fairly well with 825 units destroyed, while Hyundai suffered only 400 lost units and Kia scrapped around 200.
As you may recall, Fisker also suffered some losses, and Automotive News reports the manufacturer saw 320 Karma models damaged beyond repair. Ford and General Motors have yet to come up with estimates, and no automaker has commented on the full cost of replacing the vehicles.

2016 Acura RDX arrives with freshened styling, powertrain enhancements [UPDATE]

UPDATE: The 2016 RDX comes with a six-speed automatic transmission, not a nine-speed. The text below has been edited to reflect this. Launched in 2012 for the 2013 model year, the second-generation RDX is hardly an old vehicle, and the luxury crossover is coming off its best sales year ever, according to Acura. Still, three years after the debut, the Japanese automaker is giving the CUV a thorough refresh with a facelift and bountiful new tech at the 2015 Chicago Auto Show, with sales set to kick off this spring. The most obvious update at the front for the 2016 RDX is Acura's Jewel Eye LED headlight array already found on some of its other models, but the improvements go a lot further than just the lighting. All of the fascia's lines appear just a little sharper and the added chrome helps grab the eye. The refinements are similar at the rear, where there are now LED taillights. While not obvious on the surface, the structure underneath is supposed to offer better frontal crash performance, too. Acura's engineers turned their attention to the RDX's powertrain for some tweaks, as well. The crossover now benefits from a nine-speed automatic gearbox to replace the previous six-speed. The 3.5-liter V6 with cylinder deactivation also gets a slight upgrade to make 279 horsepower and 252 pound-feet of torque – up 6 hp and 1 lb-ft over the 2015 model. The changes benefit fuel economy by one-mile-per-gallon on the highway with ratings of 20 mpg city and 29 mpg highway for the front-wheel drive version and 19/28 with all-wheel drive. The 2016 RDX is also packed with new tech to improve drivability and safety. Active front and rear engine mounts should improve NVH, and the all-wheel-drive system has more rear bias. Inside, the cabin trim sees an update, and heated front seats are standard. The optional Technology Package now gets an eight-way power front passenger seat, the company's dual-screen multi-info display and both blind spot and rear cross traffic monitoring. However, for those looking for a ton of gadgets to brag about, the new Advance Package option is the place to be. It includes rain-sensing wipers, front fog lights, remote engine start, ventilated front seats, front and rear parking sensors, an auto-dimming driver's side mirror and the full suite of the AcuraWatch safety assist functions.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.