2010 Acura Tl Sedan 4-door 3.5l Backup Camera, Navigation Fully Loaded on 2040-cars

Auto blog

Honda Expands Takata Airbag Recall To 5.4M Units In The US

While Honda already announced plans to take its front driver's side Takata airbag inflator recall nationwide, the automaker has now officially reported on the number of affected vehicles and the specific models in need of repair. The expanded campaign covers an estimated 5.4 million units across the US, including those already being fixed under the previous regional actions. That number is an expansion of the five million units initially reported by NHTSA. The affected models under the nationwide recall are the 2001-2007 Accord with a four-cylinder engine, 2001-2002 Accord V6, 2001-2005 Civic, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2007 Pilot, 2006 Ridegline, 2003-2006 Acura MDX, 2002-2003 TL and 2002 CL. For customers who expressed concern about their vehicle's safety, Honda had already been replacing the inflators nationwide. It's possible for the inflators in these vehicles to rupture when inflating the airbag, spraying metal fragments at occupants. This problem has been blamed for at least five deaths worldwide and at least 139 reported injuries. In its statement, Honda said that it worked with Takata to test the recalled inflators in the original high-humidity recall regions, and there were no abnormal deployments in these evaluations. Honda will begin notifying owners by "over time," according to its statement. Priority will be put on the geographic areas with the highest risk of ruptures. Those in the original recall region were contacted in September. Earlier in December, Honda partnered with Autoliv to supply the automaker with replacement inflators for this campaign. Autoliv predicted it would take six months for deliveries to start. Takata also increased its production of substitute components. Scroll down to read the company's announcement of this nationwide expansion. Statement by American Honda Regarding National Safety Improvement Campaign: Driver's Front Airbag Inflator Supplied by Takata Dec 8, 2014 - TORRANCE, Calif. Honda will voluntarily expand a regional Safety Improvement Campaign initiated in June 2014 (NHTSA No. 14V-351) into a national Safety Improvement Campaign affecting certain 2001 through 2011 Honda and Acura vehicles in the United States to replace the driver frontal airbag inflator, free of charge. Honda is expanding this Safety Improvement Campaign to address concerns raised by its customers whose vehicles were not included in the regional campaign.

2014 Acura MDX shows up exactly as expected

Acura (and parent company Honda, for that matter) doesn't always leave a lot to be left to the imagination when they unveil prototypes at auto shows. Case in point: Take a gander at the Acura MDX Prototype that debuted at the Detroit Auto Show this past January, and then look at the production-spec 2014 MDX pictured above. See what we mean?
Design-wise, there frankly isn't a whole lot to get excited about with this MDX. Sure, a lot of the chiseled, sharp lines from the previous-generation model have been smoothed out in favor of something that will likely have more mass-market appeal, but to our eyes, the MDX has simply lost a lot of its visual flair in the process. To quote Autoblog senior editor Seyth Miersma, this new one just looks like the old one after melting by 10 percent. The end result is something that more closely resembles the company's smaller RDX crossover than anything else, with other subtle design elements mimicking what we've seen on the ILX and RLX sedans. It's all fine, but again, not exciting. The good news, however, is that thanks to the use of new lightweight materials, the 2014 MDX is 275 pounds lighter than the outgoing model.
Updates to what's underneath the MDX's new skin are hardly surprising, but still welcome. Power comes from a direct-injected 3.5-liter V6 making 290 horsepower and 267 pound-feet of torque, mated to a six-speed automatic transmission with both front-wheel drive and Acura's Super-Handling All-Wheel Drive on offer. Acura estimates that front-drive models will achieve 20/28/23 miles per gallon (city/highway/combined), and says that adding the SH-AWD drops those numbers to 18/27/21. Acura will offer a new Integrated Dynamic System that allows the driver to choose between normal, sport and comfort settings, and the new MDX will ride on a choice of either 18- or 19-inch alloy wheels.

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.