2008 Mdx Sport: Technology Package, Exceptional, Offered By Mercedes Dealership on 2040-cars

Auto blog

Acura builds 345-horsepower RDX A-Spec for SEMA

The 2019 Acura RDX is great — a return to form for the sporty compact luxury crossover. So there's no real harm in giving one the SEMA treatment, especially since it entails a real motorsport tie-in and some legitimate performance parts. As for the giant graphics, well, it's SEMA after all. Graham Rahal races for Honda in the IndyCar series, and he also has his own performance parts company — named, sensibly enough, Graham Rahal Performance — which he started in 2017. They sell some private-label bits manufactured by other companies to their spec, some off-the-shelf parts, and they do tuning and installation work on customer cars. Acura gave the job of building the SEMA RDX to Rahal. There's a fair bit going on under the hood to get the RDX to 345 horsepower from the factory 272 ponies. The 2.0-liter turbo engine gets a bunch of enhancements. The turbo, intake, exhaust manifolds, downpipe, and cat-back (a GRP design) are all aftermarket. There's a customer intercooler, too. KTuning did the ECU with a custom map. On the handling front, the RDX wears Eibach springs, StopTech brakes, HRE wheels at 21 inches, and Michelin Pilot Sport 4S tires. The RDX started life as an A-Spec model in Apex Blue Pearl, and from there GRP applied carbon fiber garnish to the mirrors, grille accents, and lower fascia. Troy Lee Designs did the exterior graphics, and inside there's more carbon fiber and a custom steering wheel (courtesy of Max Papis's MPI Innovations shop). The RDX will be on the show floor if you'd like to check out the Rahal shop's handiwork. Related Video:

LoveFab headed back to Pikes Peak with NSX-based heathen [w/video]

LoveFab had a rough run at Pikes Peak 2012. During qualifying on Day Two, owner and professional driver Cody Loveland launched his car off of the course at nearly 60 miles per hour. Never ones to be dismayed by a few bruised ribs and some busted body panels, LoveFab is headed back to the hill climb for 2013, and this year, it's bringing Garrett along as a title sponsor.
Loveland's chariot of choice is officially dubbed "Turbo by Garrett/LoveFab Pikes Peak Enviate" and is loosely based on an Acura NSX. All of the stock Japanese components have been swapped for LoveFab-built pieces with the exception of the subframes and suspension.
With a dry-sump LS1 V8, chromoly-tube chassis and a full carbon fiber body, the car is about as wild as they come. With around 800 pound-feet of torque on hand and a curb weight of under 2,000 pounds, the machine should give the mountain a run for its money. The team is expected to begin testing Enviate beginning May 1. You can check out a quick interview with Loveland in the video below along with the full press release.

Honda recalling 405K vehicles over airbag issue

Honda is in hot water due to an airbag glitch that is causing it to recall 405,400 vehicles. According to the campaign, the supplemental restraints might fire for no apparent reason. 342,000 of the affected vehicles are 2003 and 2004 Odyssey minivans, which gels with a National Highway Traffic Safety Administration investigation we reported on in June.
Joining the Odyssey in the recall is the Acura MDX, with 63,400 units covered from the 2003 model year. Unlike the van, though, the MDX's recall covers Japan and Australia, in addition to the US and Canada. Both vehicles are suffering from an airbag control unit that is prone to malfunction when exposed to electrical noise, a condition that can cause the airbags to deploy without warning. Although no crashes have been reported in such scenarios, there have been some injuries typical of airbag deployment - abrasions and such.
Honda will be mailing recall notices to owners near the end of October, asking them to bring their vehicles into the dealership for installation of an electrical noise filter. The repair will take about an hour and be free of charge. Scroll down for the official announcement from Honda.