2001 Acura Mdx Black Awd Touring Sport Utility 4-door 3.5l on 2040-cars

Auto blog

2020 Acura NSX Suspension Deep Dive

The Acura NSX has been a special car as long as I’ve been in the business. The first one came out in 1990, the same year I started my career in automotive engineering. I vividly remember driving one briefly back then when we brought one in for benchmarking. I'd drive it again 22 years later when my previous employer bought a used 1991 example for a long-term test. Reader interest was sky-high and the car was still gorgeous, but the march of time and automotive engineering had clearly left it behind. Then, in 2016, a second-generation NSX emerged, and it was packed with bleeding-edge thinking. It has a 3.5-liter twin-turbo V6, but this new NSX is a hybrid with an electric motor-generator sandwiched between the engine and its nine-speed DCT transmission. Two more electric motors – one for each wheel – power the front axle. There they can add traction, regenerate electricity under braking and dole out hyper-accurate levels of torque vectoring. The carÂ’s tire package was changed from Continental SportContact 5 to SportContact 6 tires in 2019, and numerous suspension re-tuning tweaks came along with them. The result is a lively and well-balanced car that is relentless when driven hard and a pussycat around town. LetÂ’s see what theyÂ’ve got going on under there.   At first glance the 2020 Acura NSX appears to have dual wishbone front suspension. But we canÂ’t tell for sure because that big two-piece brake rotor is in the way. The coil-over shock looks obvious, but a few odd details are apparent even from here.   This view also seems to indicate double wishbone suspension. But the pivot axis (green arrow) between the upper and lower ball joints looks wrong – itÂ’s far too vertical. WeÂ’re missing something. But I would be remiss if I failed to point out a few other things before we moved on. For one, the front drive axle confirms this to be an all-wheel-drive machine. Second, the forged aluminum damper mounting fork (yellow) that envelops the axle is mounted to the lower arm about 75% out from the armÂ’s inner pivot. The spring and damper motion ratio would be 0.75-to-1 relative to wheel movement, with a tiny reduction due to its lean angle. Lastly, just look at the huge cast aluminum upright (white). Beautiful. Normally these are called hub carriers or steering knuckles, and I use the terms interchangeably. But the motorsports-derived term upright is normally applied when the piece is tall and, well, upright like this one.   This explains everything.

Junkyard Gem: 1996 Acura 3.5 RL, Rocky Mountain Rambler 500 Edition

Honda had a good sales run with the Acura Legend, the first of the luxury-marque spinoffs from well-known Japanese carmakers to appear on our shores, but times change and the RL replaced the Legend as Acura's flagship starting in the 1996 model year. Here's one of those first-year RLs, found in a Denver boneyard covered in decorations from the Rocky Mountain Rambler 500 road rally. The Rocky Mountain Rambler 500 involves a lot of punitive off-road driving, so cars that have no business on the dirt seem to get coolness points. That makes Honda's most expensive vehicle of 24 years ago a fine choice of ride. I can't determine how well this car did, but the drivers looked optimistic during the inspections last month. Since the ignition key is still in the switch, I'm assuming it wasn't running so well after the rally and the team decided to bid farewell to their Acura in the lowest-hassle way possible: sell it to the nearest U-Pull-&-Pay. The team appears to have gone for a Pirates of the Caribbean theme with their big land yacht. The evil-looking wheel covers looked sharp. However, the Lord Humungus-grade roof spikes really make this car stand out, both on the rally and, now, in the junkyard. It seemed very clean, with the original owner's manual still in the glovebox. The MSRP on this car came to $41,000 in 1996, which amounts to about $69,000 in 2020 dollars. A new Lexus LS 400 cost $52,900 that year, though the $45,700 Lexus GS 300 was more likely to have battled for the money of potential 3.5 RL buyers. The 1996 Infiniti Q45 went for $53,520, while the J30 cost $39,920. The 1996 BMW 530i had a $42,750 price tag, but your Mitsubishi dealer had $25,525 Diamantes that year. Built on the idea that luxury doesn't have to be boring. Take that, Lexus!

Honda planning sub-NSX S2000 successor

Nine years separated the arrival of the original Acura NSX and the Honda S2000. By that time, the NSX was closer to the end of its fifteen-year production cycle than it was to its beginning. The latest word has it that not only is Honda planning a successor to the S2000, but it's not about to wait that long after the new NSX arrives before it's rolled out.
While the S2000 was a front-mid-engined roadster, its successor will, according to the latest from Auto Express (which we are taking with a grain of salt), be a mid-engined coupe - closer, in other words, to the NSX than the S2000. Power would come from a more potent version of the 2.0-liter turbo four developed for the upcoming new Civic Type R, possibly as part of a hybrid system derived from Honda's upcoming Formula One powertain to develop over 400 horsepower.
Whether the new sports car would revive the S2000 nameplate, and whether it would wear the Honda or Acura badge in the United States, remain to be seen. As does its potential production site: while the previous S2000 was built at the same Takanezawa plant in Tochigi as the original NSX, the new NSX will be built at the new Performance Manufacturing Center in Marysville, Ohio. The new S660 roadster, meanwhile, is set to be assembled at the same Yachiyo plant in Yokkaichi as the original Honda Beat.