1991 Acura Legend Coupe on 2040-cars

Auto blog

Airbag recall widens to include BMW, Chrysler, Ford and Toyota

The recall of faulty airbag inflators supplied by Takata has exploded today to grow to seven automakers. In most cases, only models in certain high-humidity regions were affected because the National Highway Traffic Safety Administration found in its investigation that moisture played a roll in determining whether there would be a problem. However, some companies opted for national campaigns. The exact number of affected models for these campaigns isn't yet known at this time.
BMW is recalling an undisclosed number of 325i, 325Xi, 330i and 330Xi models from the 2001 through 2005 model years and the 2001-2006 model year versions of the 325Ci and 330Ci for the driver side and passenger side inflators. Only vehicles currently registered in Florida, Puerto Rico, Hawaii and the US Virgin Islands are covered under this recall.
Neither Chrysler's filing with NHTSA nor its press release list the specific models affected, but a company spokesperson told Autoblog that at this time it only covers the driver and passenger side inflators for the 2006 Dodge Charger in Florida, Puerto Rico, Hawaii and the US Virgin Islands

2014 Acura MDX shows up exactly as expected

Acura (and parent company Honda, for that matter) doesn't always leave a lot to be left to the imagination when they unveil prototypes at auto shows. Case in point: Take a gander at the Acura MDX Prototype that debuted at the Detroit Auto Show this past January, and then look at the production-spec 2014 MDX pictured above. See what we mean?
Design-wise, there frankly isn't a whole lot to get excited about with this MDX. Sure, a lot of the chiseled, sharp lines from the previous-generation model have been smoothed out in favor of something that will likely have more mass-market appeal, but to our eyes, the MDX has simply lost a lot of its visual flair in the process. To quote Autoblog senior editor Seyth Miersma, this new one just looks like the old one after melting by 10 percent. The end result is something that more closely resembles the company's smaller RDX crossover than anything else, with other subtle design elements mimicking what we've seen on the ILX and RLX sedans. It's all fine, but again, not exciting. The good news, however, is that thanks to the use of new lightweight materials, the 2014 MDX is 275 pounds lighter than the outgoing model.
Updates to what's underneath the MDX's new skin are hardly surprising, but still welcome. Power comes from a direct-injected 3.5-liter V6 making 290 horsepower and 267 pound-feet of torque, mated to a six-speed automatic transmission with both front-wheel drive and Acura's Super-Handling All-Wheel Drive on offer. Acura estimates that front-drive models will achieve 20/28/23 miles per gallon (city/highway/combined), and says that adding the SH-AWD drops those numbers to 18/27/21. Acura will offer a new Integrated Dynamic System that allows the driver to choose between normal, sport and comfort settings, and the new MDX will ride on a choice of either 18- or 19-inch alloy wheels.

Acura replaces chief Accavitti with designer Ikeda

Acura is shaking up its senior leadership, as Honda ushers the current chief of its luxury division out the door and replaces him with a new one. Exiting stage left is Mike Accavitti, who held the reins at the premium automaker as its senior vice president and general manager of the Acura division. Taking his place will be Jon Ikeda, one of the Japanese automaker's most senior designers. Accavitti (pictured above at left) had been promoted to the job from his previous position as senior vice president of auto operations after Honda separated the Acura brand into its own division. He had previously served as a senior executive at Chrysler, rising up the ranks to run the Dodge brand, and joined Honda in 2011 as its chief marketing officer. At this point it remains unclear why Accavitti is leaving and where he might land, but Honda says he's leaving the company altogether. To replace Accavitti, Honda has named Jon Ikeda (pictured above at right), a veteran designer with the company. A graduate of the Art Center College of Design in Pasadena, CA, Ikeda has worked for Honda on both sides of the Pacific since 1989. He previous headed up the design and product planning divisions at Honda's American R&D operations, and was instrumental in creating an independent design office for the Acura brand, separate from Honda's. This isn't the first time we've seen Accavitti replaced in his role as a senior executive by a design veteran. After only four months at CEO of the Dodge brand, he was replaced by Ralph Gilles, who retained his role as senior vice president of design for the entire Chrysler group in parallel. Gilles was ultimately replaced as head of Dodge as well, but was recently promoted to serve as head of design for Fiat Chrysler Automobiles. Related Video: Acura Announces Leadership Changes TORRANCE, Calif. July 27, 2015 – Acura today announced that Jon Ikeda has been promoted to Vice President and General Manager of the Acura Division of American Honda Motor Co., Inc. In this role, Ikeda will oversee all Acura brand activities including sales, marketing and parts and service. Ikeda was formerly Division Director of Auto Design at Honda R&D Americas, Inc. (HRA). He began his career at Honda in Japan in 1989, joining the advanced design studio in Tokyo, where he worked on the award-winning Honda FSX show car. After six years in Japan, he returned to Los Angeles in 1995, to continue his career at Honda R&D in Torrance, California.