White Manual 1994 Acura Integra Ls on 2040-cars

Auto blog

2017 Acura NSX First Drive [w/video]

The 2017 Acura NSX is heavy. It outweighs the original 1990 car by more than 800 pounds and is over 300 heavier than a Chevrolet Corvette Z06. The NSX is insanely complicated, with an assist motor between the twin-turbo V6 and the nine-speed dual-clutch transmission, plus two torque-vectoring electric motors at the front axle. And the NSX is expensive. It will probably cost $170,000 when it goes on sale in Spring 2016. Commence trolling. If you hadn't guessed, the new NSX isn't much like the first generation built from 1990 to 2005. But the two cars share a common philosophy. Both are Acura's interpretation of what a modern, everyday supercar should be. Based on the new car, things have changed a lot in the last 25 years. For project leader Ted Klaus, the original NSX was one reason he started working at Honda. At the 1990 Detroit Auto Show, "I sat watching that car for a while. A really long while. Even just looking at that car I could see the deep, advanced, functional beauty." The most difficult thing with the new NSX, says Klaus, is to explain how a heavier and more complicated car can outperform other cars in a way that feels like traditional lightweighting. View 33 Photos This is not the way the NSX was supposed to be at first. The original plan was a transverse-mounted, naturally aspirated engine just like the first car. The NSX has a giant bag of neat tricks, but to understand them takes a lengthy explanation that starts with the Sport Hybrid SH-AWD powertrain. Behind the cockpit is a 75-degree, twin-turbocharged, 3.5-liter V6, made specifically for the NSX. On its own it puts out 500 horsepower and 406 pound-feet of torque. The rest of Honda's lineup uses a 60-degree layout, but the wider angle here lowers the center of gravity. Behind the engine is the rear assist motor, with 47 hp and 100 lb-ft. Hanging off the rear of that is the nine-speed dual-clutch, developed in-house. In between the front wheels is the Twin Motor Unit (TMU), a pair of 36-hp, 54-lb-ft electric motors that add or subtract forces to their respective sides. The Power Drive unit manages the electronics, and sits in the center spine of the car like a traditional prop shaft. A lithium-ion battery pack is behind the pair of seats, on the cold side of the firewall. Total system output is 573 hp and 476 lb-ft. This is not the way the NSX was supposed to be at first. The original plan was a transverse-mounted, naturally aspirated engine just like the first car.

Acura aiming for Chinese production by 2016

Not wanting to be left out of the emerging luxury car bonanza in China, Automotive News is reporting that Acura could begin producing vehicles in the Asian country by 2016. Like Audi, Mercedes-Benz and BMW, Acura will reportedly build vehicles in China using a local partner - Guangzhou Automobile Group Co. in Acura's case - while Cadillac and Infiniti will build their own vehicles locally.
Guangzhou already produces Honda models in China, but the article says that the first Acura produced in that country could be a new compact model based on the Acura SUV-X Concept (shown above), a showcar revealed in April at the Shanghai Motor Show. China's luxury car market is expected to grow to 2.7 million units a year by the end of this decade, which would put it on pace to make it the largest premium car market in the world.

Acura preps ILX for endurance racing challenge

Acura has used the occasion of this year's SEMA show to unveil a 2013 ILX that is remarkably different from the road-going car that we are familiar with. A far distance from the rather mildly performing street car, this ILX Endurance Racer is actually prepped to race at the grueling 25 Hours of Thunderhill in Willows, California.
The ILX racers (Team Honda Research has prepped two of them for the race) have actually each been constructed using two donor ILX sedans: one body-in-white chassis and one full production-spec car that donates powertrain, interior and electronic components. Overall, increasing the performance of the car was done mostly through extensive weight reduction rather than bumps in power. No figures have been given for the output of the ILX's K24Z7 engine, though we are told that a custom intake and exhaust have been fitted, as well as a racing flywheel.
A prominent LED lighting system dominates the front fascia of the ILX, along with a huge front splitter, while a massive wing speaks to the intentions of the car.