1995 Acura Integra K20a2 on 2040-cars

Auto blog

Honda finds new Green Path to reduce CO2 emissions

In the wake of the Volkswagen diesel scandal, it's impossible to hear an automaker talk about its overall environmental efforts and not think to yourself, "for real?" Still, we're willing to listen. And Honda representatives gave it their best shot yesterday in Marysville, OH as they introduced a small group of journalist to the company's expanded initiative aimed at cutting CO2 emissions and the total life-cycle environmental impact of Honda products. Called Green Path, the initiative now includes a $210-million expansion at Honda's Marysville, OH manufacturing plant to install a better, cleaner paint shop. Speaking at the facility yesterday, Honda representatives said that the plant room is not only better for the environment (it uses limestone dust instead of water to capture paint particles, for example, reducing water usage by about 2 million gallons annually. Overall, the new paint shop will have 60 percent less VOC emissions and reduce CO2 emissions by 18 percent), it also makes the cars look better. That's whey the two-step temperature curing process will initially only be used on Acuras to differentiate them from the competition. Honda will fire up trials in late 2017. There's more to Green Path than the new paint show, of course. The company wants to reduce - in some cases eliminate - what it calls substances of concern (SOCs), things like lead and mercury. There are also new wind turbines in Ohio to supply power to Honda plants, the Environmental Leadership Program for independent dealerships to make their own green moves, and swapping out fluorescent light bulbs for LEDs, among other efforts. In the Marysville Auto Plant, for example, the Assembly department has over 10,000 task light bulbs. The fluorescent ones used to need to be replaced every three years, but the new LEDs have a life span of 16 years. Honda says that calculating up the impact of all of these little changes will remove an average of 3.822 kilograms of CO2 from the production tally of each car it makes. The company's stated goal is to reduce its total greenhouse gas emissions by 50 percent (compared to 2000 levels) by 2050. You can find out more in Honda's press release and video, below. Honda Announces New "Green Path" Initiative to Reduce Total Life-Cycle Environmental Impact MARYSVILLE, Ohio (Sept.

Acura NSX GT3 racecar bares all in raw carbon

Acura slowly and dramatically revealed the NSX over a period of years. There were previews, concepts, and lots of teases before Acura finally showed us the whole thing. It's a different story for the racecar. And today, the wraps come off the FIA GT3-spec NSX to show all of its bare-carbon glory. The NSX GT3 strips away more than just the paint from the standard road car. The racecar comes sans hybrid system, meaning all the power from the twin-turbocharged 3.5-liter V6 is sent solely to the rear wheels. Modifications to the body include a large rear wing, underbody diffuser, and bigger hood vents for engine cooling. While the hybrid system may be gone, the NSX GT3 uses the same block, heads, valvetrain, crankshaft, pistons, and dry sump lubrication system as the road car. Power is sent through a six-speed sequential gearbox instead of the road car's nine-speed. The NSX GT3 will be built alongside the street version in Ohio. Honda engineers in Japan and North America shared in the development. Final GT3 homologation will be completed by the company's Honda Performance Division in Santa Clarita, CA. Related video:

2019 Acura RDX crossover gets turbocharged power, A-Spec version

NEW YORK — Calling the RDX that Acura showed at this year's Detroit Auto Show a "concept" was stretching that term to the limits of credulity. The production version of the 2019 RDX is here, and this turbocharged crossover with available AWD looks darn near identical. While it offers all-wheel drive like its Lexus NX and Audi Q3 competitors, Acura's next-generation SH-AWD should be a serious selling point. Let's cover that "Super Handling All-Wheel Drive" system for a moment. It takes power from the 2.0-liter, 272 horsepower and 280 pound-feet of torque engine and routes it up to 70 percent rearward, and there's real torque vectoring (rather than brake-based faux vectoring) to shift 100 percent of that rear axle power to either wheel. The broad strokes are similar to the outgoing model's system, but there's much more available rear power bias — in the 2016 model, up to 40 percent could be sent to the rear. And that was up from 25 percent for pre-2016 models. The takeaway is that the RDX should handle a lot better on both dry and slippery pavement, and feel a bit sportier doing it. A new engine may help as well. The outgoing 3.5-liter V6 is replaced by a turbocharged four-cylinder, almost certainly related to the unit in the Accord and Civic Type R, and tuned somewhere in between those cars (252 and 306 horsepower, respectively). We expect the new engine to be lighter than the old V6, and less weight off the front end should improve steering feel and handling. For those keeping track, the new engine is down 7 horsepower but up 28 pound-feet in torque, and thanks to turbocharging the torque band starts down low and is relatively flat, so more oomph from a stop and on through the rev range. The six-speed automatic is gone, replaced by a 10-speed automatic. Most of its competitors use six- or eight-speed units, so that'll be a marketing focus. As you'd expect, the individual ratios are closer-spaced but the total ratio spread is, according to Acura, 62 percent wider than the outgoing automatic. There are steering-wheel-mounted paddles if you'd like to shift yourself. Since the styling is very much a lightly retouched Prototype RDX from the Detroit show, it's nice to be able to give a sense of the new car's proportions with hard numbers. First of all, it's riding on a 2.6-inch longer wheelbase. Overall length is 187 inches, up from 184.4, and width is unspecified.