2006 Acura Tsx Base Sedan 4-door 2.4l on 2040-cars

Auto blog

We drive the Acura TLX-GT racecar

Don't break the car. As you can tell from the video, that's the theme of the day at Gingerman Raceway in South Haven, MI. After two short lapping sessions in the Acura TLX-GT fear gave way to familiarity, and a second theme emerged: this is awesome. The anxiety was appropriate. There are only two TLX-GTs in the world, and both were at Gingerman that day. A mishap would potentially put either Ryan Eversly and Peter Cunningham out of contention for the subsequent Pirelli World Challenge race. I did not want to be that guy. But back to the awesome part. The TLX-GT is barely TLX, but more Acura that you might expect. The wheelbase, roof, and doors are all stock dimensions, although all the bodywork is carbon fiber. Out go the front MacPherson struts, in goes a special double-wishbone suspension. All-wheel drive comes from an XTRAC six-speed sequential transmission originally developed for Dakar Rally vehicles. The side mirrors are stock. Under the hood lies a 3.5-liter twin-turbo V6 with a stock block, head, crank, and throttle body. "Under the hood" is a generous term, though, because half of the engine sits inside the cabin. The front end of the block is aft of the front axle - the rest of the hood is taken up with radiators and hoses. To service the turbochargers, the RealTime mechanics remove the top of the dashboard. The front-mid engine location pushes the driver's seat back to the B-pillar, so you sit like Hightower from Police Academy. Only with less visibility. This does not calm the nerves. Nor does the din of 600 or so unmuffled horsepower. My first laps were understandably timid. But the TLX-GT is actually easy to drive. You get used to the low, rearward seating position almost immediately. Once rolling you don't need the clutch for shifts - just bang the right and left paddles to go up and down. I even became accustomed to the acceleration. At more than 3,000 pounds curb weigh the TLX-GT is quick, but not as explosive as cars like the Chevrolet Corvette Z06. Where the TLX-GT blows away road cars is in grip and braking, neither of which I fully exploited. The brake pedal is so hard you feel like you're standing on it just to get the pads to bite. Once engaged, they're like an endless well of deceleration, with ABS somewhere down at the bottom of the abyss. Second lapping session over, car returned intact and adrenaline high in full effect. I had the uncontrollable urge to get back behind the wheel. I mean, I barely had time to get up to speed.

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.

Honda celebrates 30th anniversary of the NSX with a look back at how it began

In 1989, the baseball-loving Japanese dipped their bats in pine tar and came to the U.S. to take gigundous swings. That single year launched five legends: Lexus LS400, Infiniti Q45, Nissan 300ZX Twin Turbo, Mazda MX-5 Miata, and Acura NS-X concept. The Chicago Auto Show (!) hosted the global debuts of the Mazda and the Acura. While Mazda celebrates the bygones with the 30th Anniversary Miata, Acura's reminiscing with a look at how the NSX — a car Motor Trend described in 1990 as, "[The] best sports car the world has ever produced. Any time. Any place. Any price ..." — came to be. The development yearbook opened in 1984, a year after Honda returned to Formula One as an engine supplier for the Spirit team, and for the second Williams chassis in the last race of the season. For the first time in the automaker's history, Honda wanted to build a production car with the engine behind the cabin, one that would demonstrate Honda's engineering prowess and "deeply rooted racing spirit." The sports car would also serve as a halo for the not-yet-launched Acura brand. The engineering team built the first test vehicle in February 1984 on the bones of a first-generation Honda Jazz. After four years of formal development, Honda parked the NS-X Concept in a conference room at Chicago's Drake Hotel in February 1989. This is where the media would meet the red wonder before the public show-stand debut. The F-16 Fighting Falcon-inspired coupe was built on the world's first all-aluminum monocoque, and its SOHC V6 ran with titanium connecting rods. Before the press conference, then-Honda president Tadashi Kume got in the NS-X, started the engine, and revved to the 8,000-rpm redline — a noise felt by everyone in the adjacent conference room attending a Ford press conference. Honda's PR man at the time yelled, "Mr. Kume, stop it! They're gonna hear this!" When Kume got out, he asked Honda engineers present why they didn't put their new VTEC technology in the NS-X. (What's Japanese for, "Why didn't the VTEC kick in, yo?!") They told him VTEC had been created for four-cylinder engines. Kume told them to work on a V6 application. More suggestions came from journos who drove the early prototypes at Honda's Tochigi R&D Center, who said the NS-X "could use more power." The development team had grabbed the SOHC V6 from the Acura Legend for the NS-X concept, and it put out 160 horsepower in the luxury sedan.