2015 Acura Tlx 4dr Sdn Fwd Tech on 2040-cars

Auto blog

2017 Acura NSX First Drive [w/video]

The 2017 Acura NSX is heavy. It outweighs the original 1990 car by more than 800 pounds and is over 300 heavier than a Chevrolet Corvette Z06. The NSX is insanely complicated, with an assist motor between the twin-turbo V6 and the nine-speed dual-clutch transmission, plus two torque-vectoring electric motors at the front axle. And the NSX is expensive. It will probably cost $170,000 when it goes on sale in Spring 2016. Commence trolling. If you hadn't guessed, the new NSX isn't much like the first generation built from 1990 to 2005. But the two cars share a common philosophy. Both are Acura's interpretation of what a modern, everyday supercar should be. Based on the new car, things have changed a lot in the last 25 years. For project leader Ted Klaus, the original NSX was one reason he started working at Honda. At the 1990 Detroit Auto Show, "I sat watching that car for a while. A really long while. Even just looking at that car I could see the deep, advanced, functional beauty." The most difficult thing with the new NSX, says Klaus, is to explain how a heavier and more complicated car can outperform other cars in a way that feels like traditional lightweighting. View 33 Photos This is not the way the NSX was supposed to be at first. The original plan was a transverse-mounted, naturally aspirated engine just like the first car. The NSX has a giant bag of neat tricks, but to understand them takes a lengthy explanation that starts with the Sport Hybrid SH-AWD powertrain. Behind the cockpit is a 75-degree, twin-turbocharged, 3.5-liter V6, made specifically for the NSX. On its own it puts out 500 horsepower and 406 pound-feet of torque. The rest of Honda's lineup uses a 60-degree layout, but the wider angle here lowers the center of gravity. Behind the engine is the rear assist motor, with 47 hp and 100 lb-ft. Hanging off the rear of that is the nine-speed dual-clutch, developed in-house. In between the front wheels is the Twin Motor Unit (TMU), a pair of 36-hp, 54-lb-ft electric motors that add or subtract forces to their respective sides. The Power Drive unit manages the electronics, and sits in the center spine of the car like a traditional prop shaft. A lithium-ion battery pack is behind the pair of seats, on the cold side of the firewall. Total system output is 573 hp and 476 lb-ft. This is not the way the NSX was supposed to be at first. The original plan was a transverse-mounted, naturally aspirated engine just like the first car.

8 cars we're most looking forward to driving in 2015

Now that 2014 is officially in the books, it's time to look ahead. And following our list of the cars we liked best last year, we're now setting our sights at the hot new metal that's coming our way in 2015. Some of these, we've already seen. And some are still set to debut during the 2015 auto show season. But these are the machines that keep us going – the things on the horizon that we're particularly stoked to drive, and drive hard. Jeep Renegade Not the Chevrolet Corvette Z06. Not the Ford Mustang GT350. Not the new John Cooper Works Mini. Nope, I'm looking forward to the adorable, trail-rated Jeep Renegade. And that's because I really, really, really like our long-term Jeep Cherokee Trailhawk. I do not, however, care too much for the Cherokee's looks, and I really don't like its $38,059 price tag. The Renegade Trailhawk, meanwhile, promises much of the same rough-and-tumble character as its big brother, but at what we expect will be a more reasonable price (I'm personally wagering on the baby Jeep's off-road model starting at no more than $23,000). With a 2.4-liter four-cylinder and a nine-speed automatic, it should also be a bit easier to fill than the V6-powered Cherokee. Also, I can't help but love the way the Renegade looks. It's like someone took a Wrangler, squished it by 50 percent and then handed it off to George Clinton for a healthy dose of funk. The interior, with its bright, expressive trims and color schemes should also be a really nice place to spend some time. I'll be attending the Renegade's launch later this month, so I'll have a much shorter wait than my colleagues. Here's hoping the baby Jeep lives up to my expectations. – Brandon Turkus Associate Editor Mazda MX-5 Miata Here's an uncomfortable truth: I'd rather spend a day driving a properly sorted Mazda MX-5 Miata of any generation on a winding road than I would nearly any other vehicle, regardless of power, price or prestige. It's not just that I prize top-down driving and enjoy the Miata's small size because it gives me more road to play with. I just find there's more motoring joy to be had with high-fidelity handling and an uncorrupted car-to-driver communication loop than I do with face-distorting power or grip – let alone valet-stand gravitas. But perhaps most of all, I love Miatas because they can deliver that level of feedback and driver reward at modest speeds that won't put the locals on edge or endanger lives – you can use more of the car more of the time.

2017 Acura NSX production launches in April

After a decade of waiting and a few false starts, the new Acura NSX will finally start rolling out of its Marysville, OH, factory in late April. Customer deliveries won't be too far behind. We can't wait to hear whether buyers find the supercar as fast and comfortable as we did during the First Drive. Trial production is already underway at the NSX's bespoke factory called the Performance Manufacturing Center. The plant is specifically for production of low-volume vehicles with cutting-edge tech. The site employs 100 people to construct, paint, and check the quality of the new supercar, and they need 14 hours to build each one. Robots take care of some of the more intricate tasks like MIG welding the space frame. View 6 Photos It also takes workers six hours to build each NSX's 3.5-liter V6 by hand at the nearby engine plant in Anna, OH. They machine balance every one and run the powerplant through a 150-mile break-in procedure. While the supercar isn't at dealers yet, you can already build your own 2017 NSX online. Prices start at $157,800 (after $1,800 for destination), but the first examples only come with carbon-ceramic brakes, which add at least $9,900 to the price. When Autoblog editors optioned them out, the cheapest we managed was $172,700. Related Video: ACURA ANNOUNCES PLANS FOR START OF SERIAL PRODUCTION OF THE 2017 ACURA NSX Performance Manufacturing Center is exclusive global production home for Acura NSX with serial production to begin late April World-class facility boasts quality, craftsmanship and technological innovation Mar 17, 2016 - MARYSVILLE, Ohio -- Acura today announced that the all-new Performance Manufacturing Center will begin serial production of the next-generation Acura NSX supercar in late April, with customer deliveries to commence thereafter. The new Performance Manufacturing Center (PMC) is the exclusive global manufacturing facility for the all-new Acura NSX supercar and is structured around an innovative blend of people and technology. Combining human craftsmanship and technological innovation, the PMC utilizes new approaches to vehicle construction, paint, assembly and quality confirmation to deliver on the Acura brand DNA of Precision Crafted Performance.