3.5 3.5l Bluetooth Nav Cd 12 Speakers Acura/els Premium Am/fm Tuner Am/fm Radio on 2040-cars

Auto blog

Acura builds 345-horsepower RDX A-Spec for SEMA

The 2019 Acura RDX is great — a return to form for the sporty compact luxury crossover. So there's no real harm in giving one the SEMA treatment, especially since it entails a real motorsport tie-in and some legitimate performance parts. As for the giant graphics, well, it's SEMA after all. Graham Rahal races for Honda in the IndyCar series, and he also has his own performance parts company — named, sensibly enough, Graham Rahal Performance — which he started in 2017. They sell some private-label bits manufactured by other companies to their spec, some off-the-shelf parts, and they do tuning and installation work on customer cars. Acura gave the job of building the SEMA RDX to Rahal. There's a fair bit going on under the hood to get the RDX to 345 horsepower from the factory 272 ponies. The 2.0-liter turbo engine gets a bunch of enhancements. The turbo, intake, exhaust manifolds, downpipe, and cat-back (a GRP design) are all aftermarket. There's a customer intercooler, too. KTuning did the ECU with a custom map. On the handling front, the RDX wears Eibach springs, StopTech brakes, HRE wheels at 21 inches, and Michelin Pilot Sport 4S tires. The RDX started life as an A-Spec model in Apex Blue Pearl, and from there GRP applied carbon fiber garnish to the mirrors, grille accents, and lower fascia. Troy Lee Designs did the exterior graphics, and inside there's more carbon fiber and a custom steering wheel (courtesy of Max Papis's MPI Innovations shop). The RDX will be on the show floor if you'd like to check out the Rahal shop's handiwork. Related Video:

2024 Acura Integra Type S revealed as the luxurious foil to the Type R

The 2024 Acura Integra Type S is exactly what we imagined it might be. Acura took all the Civic Type R go-fast parts and shoved them into the Integra, but then added luxuries the Type R is missing and fettled with a few performance bits. Just as was teased ahead of time, the Integra Type S is fitted with a 2.0-liter turbocharged four-cylinder that produces 320 horsepower and 310 pound-feet of torque — thatÂ’s up five horses over the Type R. ItÂ’s fitted with a six-speed manual transmission (no auto available) and sends its power through the front wheels via a helical-type limited-slip differential. The same dual-axis front suspension design pioneered by the Type R to quell torque steer is on display here, so you should expect little to no torque steer from the Integra. Of course, all that extra power meant Acura needed much more cooling capability, leading them to design a much more aggressive and air-hungry front end for the Integra. In fact, every single body panel from the A-pillars forward is unique to the Type S. The larger top and lower grilles and vented hood improve airflow by 170% versus a standard Integra, Acura says. Look to the sides, and youÂ’ll see dramatic fender flares both in front and rear that accommodate the massive 265-section-width Michelin Pilot Sport 4S summer tires that wrap around 19-inch wheels — the Type S is 2.8 inches wider than a standard Integra. For those wondering, yes, itÂ’s the same tire package as youÂ’ll find on a Type R. Out back, youÂ’ll notice substantial diffusers flanking a new triple-tipped center-mounted exhaust. Said exhaust is less restrictive than the Type R, features an active exhaust valve and adjusts depending on the drive mode. Acura says a special “pops and bangs” auditory experience presents itself in “Sport+” mode. The suspension tuning is another differentiator between the Integra Type S and Civic Type R. It uses the same adaptive damper system as the Civic, but Acura adjusted the tune for the Type S in its Comfort, Sport and Sport+ driving modes, presumably to be more street-friendly. Acura emphasizes that this car delivers “ultimate street performance” numerous times in its press release, suggesting that the Integra is set up as more of a daily driver, while the Civic Type R is very much designed to excel on the racetrack.

Honda celebrates 30th anniversary of the NSX with a look back at how it began

In 1989, the baseball-loving Japanese dipped their bats in pine tar and came to the U.S. to take gigundous swings. That single year launched five legends: Lexus LS400, Infiniti Q45, Nissan 300ZX Twin Turbo, Mazda MX-5 Miata, and Acura NS-X concept. The Chicago Auto Show (!) hosted the global debuts of the Mazda and the Acura. While Mazda celebrates the bygones with the 30th Anniversary Miata, Acura's reminiscing with a look at how the NSX — a car Motor Trend described in 1990 as, "[The] best sports car the world has ever produced. Any time. Any place. Any price ..." — came to be. The development yearbook opened in 1984, a year after Honda returned to Formula One as an engine supplier for the Spirit team, and for the second Williams chassis in the last race of the season. For the first time in the automaker's history, Honda wanted to build a production car with the engine behind the cabin, one that would demonstrate Honda's engineering prowess and "deeply rooted racing spirit." The sports car would also serve as a halo for the not-yet-launched Acura brand. The engineering team built the first test vehicle in February 1984 on the bones of a first-generation Honda Jazz. After four years of formal development, Honda parked the NS-X Concept in a conference room at Chicago's Drake Hotel in February 1989. This is where the media would meet the red wonder before the public show-stand debut. The F-16 Fighting Falcon-inspired coupe was built on the world's first all-aluminum monocoque, and its SOHC V6 ran with titanium connecting rods. Before the press conference, then-Honda president Tadashi Kume got in the NS-X, started the engine, and revved to the 8,000-rpm redline — a noise felt by everyone in the adjacent conference room attending a Ford press conference. Honda's PR man at the time yelled, "Mr. Kume, stop it! They're gonna hear this!" When Kume got out, he asked Honda engineers present why they didn't put their new VTEC technology in the NS-X. (What's Japanese for, "Why didn't the VTEC kick in, yo?!") They told him VTEC had been created for four-cylinder engines. Kume told them to work on a V6 application. More suggestions came from journos who drove the early prototypes at Honda's Tochigi R&D Center, who said the NS-X "could use more power." The development team had grabbed the SOHC V6 from the Acura Legend for the NS-X concept, and it put out 160 horsepower in the luxury sedan.