2014 Acura Tl Sh-awd Tech All Wheel Drive 3.7l V6, 4553 Miles on 2040-cars

Auto blog

J.D. Power study sees new car dependability problems increase for first time since 1998

For the first time since 1998, J.D. Power and Associates says its data shows that the average number of problems per 100 cars has increased. The finding is the result of the firm's much-touted annual Vehicle Dependability Study, which charts incidents of problems in new vehicle purchases over three years from 41,000 respondents.
Looking at first-owner cars from the 2011 model year, the study found an average of 133 problems per 100 cars (PP100, for short), up 6 percent from 126 PP100 in last year's study, which covered 2010 model-year vehicles. Disturbingly, the bulk of the increase is being attributed to engine and transmission problems, with a 6 PP100 boost.
Interestingly, JDP notes that "the decline in quality is particularly acute for vehicles with four-cylinder engines, where problem levels increase by nearly 10 PP100." Its findings also noticed that large diesel engines also tended to be more problematic than most five- and six-cylinder engines.

The 2017 Acura NSX will cost $156,000

Back in October, when our Editor-in-Chief Mike Austin drove the 2017 Acura NSX for the first time in the Bay Area and at Sonoma Raceway, we guessed that the hybrid supercar would start at around the $170,000 price point. We weren't that far off – it starts at $156,000, and tops out around $205,000. But now that we have a solid sense of what Acura thinks this car is worth, and we know what they benchmarked the NSX against, we can compare apples to apples. Let's be clear: we like this car. Austin described it as "makes you giggle" fast, everyday-comfortable, and chock full of impressive party tricks like seamless shifting – with only a few foibles, like numb steering, to spoil the illusion of perfection. Back to the benchmarked cars. Acura says the NSX will compete with the Audi R8, and was developed to compete with the now-superseded 458 Italia. Let's start with the 2017 R8 V10 Plus – pricing hasn't been released, and a direct Euro-to-USD conversion isn't the whole story, but it starts at the equivalent of $179,000 in Europe. For that, the R8 V10 Plus provides 610 horsepower, a seven-speed DCT, and a 3.2-second sprint to 60 mph. The 458's successor, the 488 GTB, should be more expensive than the $243,000 the old model started at, and provides 661 hp, a seven-speed dual-clutch, and a 0-60 time of around three seconds (official numbers haven't been released for acceleration). For less money than either of these cars, the NSX delivers ... less. Total system output is 573 hp. It has a slight edge in gear count, at nine speeds, and should beat the R8 to 60 mph. But there's no V10, let alone Ferrari's feral turbocharged V8. It'll be up to buyers to determine if the compromises involved are worth a few thousand dollars in savings, if no options are selected. It should also be noted that Acura describes this as its first "built-to-order" vehicle, but the limited external color options and interior schemes don't appear to be much different than the extent to which you can customize an Accord. The configurator goes live on February 25th, if you want to see for yourself. Lastly, in what now seems to be a necessary part of a new high-end car launch, Acura will auction off VIN 001, the first production NSX, at Barrett-Jackson in January. All proceeds from that auction will benefit two charities: the Pediatric Brain Tumor Foundation and Camp Southern Ground. Related Video: Acura Shares Details of Next-Generation Acura NSX Sales Plan - 2017 Acura NSX U.S.

Acura NSX production delayed

Listeners of the Autoblog Podcast will be familiar with my opinions on the Acura NSX. While I love the idea of Acura building a halo car again, I've routinely joked on-air that the car will never, ever reach production and will continue being teased and previewed ad nauseam. So I'm chuckling at this news: the NSX is being delayed again. To be fair, while it sounds like a big deal – pushing the NSX back from model year 2016 to 2017 – this is a fairly minor delay in the grand scheme. Instead of starting production this fall, as previously announced, the new supercar will start rolling down the line at Honda's Marysville, OH factory in the spring. "Trial production" has already started, Honda says, while briefly acknowledging the delay in the attached press release. While Honda offered no reason for the delay in volume production, Automobile claims it's the fault of the move to fit two turbochargers to the V6, which was made midway through development. Fitting the two iron lungs meant rearranging the six-pot into a longitudinal layout. Here's hoping there are no further delays. Scroll on for a look at Honda's press release, which does its best to gloss over the NSX delay while talking about the company's new Performance Manufacturing Center in Marysville. Related Video: Performance Manufacturing Center: Precision Craftsmanship Aug 14, 2015 - CARMEL-BY-THE-SEA, Calif. The next-generation Acura NSX is produced at the new, dedicated Performance Manufacturing Center (PMC) in Marysville, Ohio, using domestic and globally sourced parts. With trial production already underway and production start-up scheduled for spring 2016, this world-class manufacturing facility employs groundbreaking techniques in weld, body construction, body painting, final assembly and quality confirmation to ensure the highest levels of precision and craftsmanship. More details on the unique and innovative manufacturing processes at the PMC will be rolled out over the months leading up to the start of production, but the following highlights of the new facility were shared during the 2015 Monterey Automotive Week: Innovative blend of people and technology: throughout the PMC, NSX production is centered around the skills of approximately 100 experienced engineers and technicians building the NSX to precise levels of quality and craftsmanship.