2009 Acura Tl Fwd Automatic Heated Power Leather Keyless Kchydodge on 2040-cars

Auto blog

2015 Acura TLX

Immediately after landing at Washington's Dulles airport, an Acura representative handed me the keys to a 2014 TSX with fewer than 180 miles on its clock. The four-cylinder engine started and I pointed its signature beak towards a destination in Middleburg, VA. It was a curious move by the Japanese automaker, especially considering that I had flown no less than 2,300 miles to drive the discontinued vehicle's ostensible successor, the all-new 2015 Acura TLX.
Yet spending a solid 40 minutes with a sparkling-new version of the outgoing model that still smelled showroom fresh, allowed me an opportunity to scrutinize the dropped sedan and remind myself why it had never really blown me away - it was good at doing many things, but truly great at doing none.
Time with the TSX also started me thinking about the Acura TL, the second model that the TLX will effectively replace. I have better memories of the slightly larger sedan, especially the SH-AWD 6MT trim - it's a solid driver's car - but it, too, fell short in areas where competitors, including the Audi A4, BMW 3 Series, Cadillac ATS, Lexus IS and Mercedes-Benz C-Class, excelled.

2019 Acura RDX crossover gets turbocharged power, A-Spec version

NEW YORK — Calling the RDX that Acura showed at this year's Detroit Auto Show a "concept" was stretching that term to the limits of credulity. The production version of the 2019 RDX is here, and this turbocharged crossover with available AWD looks darn near identical. While it offers all-wheel drive like its Lexus NX and Audi Q3 competitors, Acura's next-generation SH-AWD should be a serious selling point. Let's cover that "Super Handling All-Wheel Drive" system for a moment. It takes power from the 2.0-liter, 272 horsepower and 280 pound-feet of torque engine and routes it up to 70 percent rearward, and there's real torque vectoring (rather than brake-based faux vectoring) to shift 100 percent of that rear axle power to either wheel. The broad strokes are similar to the outgoing model's system, but there's much more available rear power bias — in the 2016 model, up to 40 percent could be sent to the rear. And that was up from 25 percent for pre-2016 models. The takeaway is that the RDX should handle a lot better on both dry and slippery pavement, and feel a bit sportier doing it. A new engine may help as well. The outgoing 3.5-liter V6 is replaced by a turbocharged four-cylinder, almost certainly related to the unit in the Accord and Civic Type R, and tuned somewhere in between those cars (252 and 306 horsepower, respectively). We expect the new engine to be lighter than the old V6, and less weight off the front end should improve steering feel and handling. For those keeping track, the new engine is down 7 horsepower but up 28 pound-feet in torque, and thanks to turbocharging the torque band starts down low and is relatively flat, so more oomph from a stop and on through the rev range. The six-speed automatic is gone, replaced by a 10-speed automatic. Most of its competitors use six- or eight-speed units, so that'll be a marketing focus. As you'd expect, the individual ratios are closer-spaced but the total ratio spread is, according to Acura, 62 percent wider than the outgoing automatic. There are steering-wheel-mounted paddles if you'd like to shift yourself. Since the styling is very much a lightly retouched Prototype RDX from the Detroit show, it's nice to be able to give a sense of the new car's proportions with hard numbers. First of all, it's riding on a 2.6-inch longer wheelbase. Overall length is 187 inches, up from 184.4, and width is unspecified.

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.