2005 Acura Tl Base Sedan 4-door 3.2l on 2040-cars

Auto blog

Acura recalling nearly 20k new MDX crossovers over AWD driveshafts

Acura is recalling nearly 20,000 of its 2014 MDX crossovers fitted with all-wheel drive over driveshaft concerns. The affected vehicles were built between May 6, 2013 and October 14, 2013, and have bolts that attach the driveshaft to the transmission that may not have been tightened properly.
Needless to say, an improperly secured driveshaft could lead to a number of problems, including everything from excessive drivetrain noise to full driveshaft detachment, a condition which could result in a loss of power and crash.
There's been no reports of accidents, injuries or deaths relating to the driveshaft issues. Acura will begin notifying all 19,197 owners in question of the recall, and will request that they report in for repairs, which will consist of tightening the driveshaft-attaching bolts. Scroll down for the official bulletin from NHTSA.

Honda recalls 2.23 million vehicles to replace Takata inflators

The Basics: Honda and Acura will recall 2.23 million vehicles in the US. The affected models are: 2005-2012 Acura RL 2007-2011 Honda CR-V 2007-2016 Acura RDX (early production MY 2016 vehicles only) 2007-2014 Honda Ridgeline 2009-2014 Honda Fit 2009-2014 Acura TL 2010-2014 Honda FCX Clarity 2010-2014 Honda Insight 2010-2013 Acura ZDX 2011-2015 Honda CR-Z 2013-2016 Acura ILX (early production MY 2016 vehicles only) The Problem: These vehicles have Takata's PSDI-5 airbag inflator on the driver's side, and this part could rupture if the airbag deploys. Injuries/Deaths: There are no reported ruptures of the PSDI-5 inflator in Honda or Acura vehicles. However, Takata's exploding components have links to at least 10 deaths worldwide because they can spray shrapnel at occupants. The Fix: Honda and Acura dealers will replace the inflators with parts from an alternative supplier. If You Own One: The repairs will begin this summer. Owners will receive a letter notifying them about the recall within 60 days and will get a second message when the parts are available. The company will prioritize older models in high-humidity regions first because these inflators would be most likely to rupture. More Information: Honda and Acura have now recalled 8.51 million vehicles in the US to replace their driver or passenger side inflators. This latest expansion came in the wake of a driver death from an airbag rupture in a Ford Ranger. Ford and Mazda already enlarged their safety campaigns. The National Highway Traffic Safety Administration also announced Audi, BMW, Daimler Vans, Mercedes-Benz, Saab, and Volkswagen would have recalls for this issue, too. Statement by American Honda Regarding Nationwide Recall of Certain Takata PSDI-5 Driver Front Airbag Inflators Feb 3, 2016 - TORRANCE, Calif. Approximately 2.23 million Takata PSDI-5 driver front airbag inflators will require replacement in Honda and Acura vehicles in the U.S. No PSDI-5 inflator ruptures have been reported in Honda or Acura vehicles Takata inflators will be replaced with parts from an alternative supplier with repairs beginning in the Summer of 2016 Based on a recent Defect Information Report (16E-005) from the airbag inflator supplier, Takata, Honda will conduct a national recall (16V-061) of approximately 2.23 million Honda and Acura vehicles in the United States to replace, free of charge to vehicle owners, the PSDI-5 Takata driver front airbag inflators installed in those vehicles.

Acura NSX GT3 non-hybrid racecar on sale soon

Just over a year ago, Acura debuted the NSX GT3, the FIA GT3-spec racecar based on the automaker's latest and greatest. While it took years for the road car to hit the streets, the NSX GT3 was developed in a relatively short amount of time. This year, the car competed in several races under the factory banner, racking up 50,000 miles and two race victories. Today, Honda and Acura announced the NSX GT3 will go on sale for private teams. Think of the NSX GT3 as a stripped out version of the standard NSX sans hybrid system. The 3.5-liter twin-turbo remains, but, since there are no electric motors up front, all the power is sent to the rear wheels through a XTRAC semi-automatic 6-speed sequential transmission. The chassis is built in Ohio right alongside the regular NSX. The same goes for the engines. The block, heads, valve train, crankshaft, pistons, and dry-sump lubrication system are the same specification as the production car. Final assembly is completed in Italy. This past year, the NSX GT3 competed under the Acura banner in the WeatherTech SportsCar Championship GTD class and the Pirelli World Challenge GT category. In addition to those series, the car is built to compete in the Blancpain GT Series and 24 Hours Nurburgring in Europe, the Super GT GT300 class in Japan, as well as other GT3-spec race series. Different divisions of Honda will be handling global sales, with HPD responsible for the North American market. US pricing hasn't been announced, but converting the European models start at about $545,000. Now we just want to see a lightened, non-hybrid version of the NSX on the street. Related Video: Featured Gallery Acura NSX GT3 View 11 Photos Image Credit: Honda Motorsports Acura Honda Coupe Racing Vehicles Performance honda nsx acura nsx gt3