1999 Acura Tl Base Sedan 4-door 3.2l on 2040-cars

Auto blog

Acura recalling 19.5K cars over automatic braking problem

Acura is recalling 19,502 vehicles to fix a software issue with their Collision Mitigation Braking System on the 2014-2015 MDX and RLX, plus the 2014 RLX Sport Hybrid. According to the National Highway Traffic Safety Administration the technology can falsely interpret things like metal fences and guardrails along the side of the road as obstacles and unexpectedly apply "emergency braking force." Obviously, that would be rather disconcerting while driving. Number of Auto Recalls by Model Year | AxleGeeks According to the detailed documents from NHTSA, the first account of this happening came from Japan in November 2013, and that vehicle was rear-ended when the system suddenly braked. Another incident was identified there in June 2014. However, there have been no reports of this happening in the US. The fix is quite simple, though and just requires a software update for the system. Affected owners will be notified by mail, and the repair will be done at no charge. Related Video: RECALL Subject : Activation of Collision Mitigation Braking System Report Receipt Date: MAY 20, 2015 NHTSA Campaign Number: 15V301000 Component(s): FORWARD COLLISION AVOIDANCE Potential Number of Units Affected: 19,502 All Products Associated with this Recall Vehicle Make Model Model Year(s) ACURA MDX 2014-2015 ACURA RLX 2014-2015 ACURA RLX HYBRID 2014 Details Manufacturer: Honda (American Honda Motor Co.) SUMMARY: Honda (American Honda Motor Co.) is recalling certain model year 2014-2015 Acura MDX 2WD and AWD, RLX and 2014 Acura RLX Hybrid vehicles. In certain driving conditions, the Collision Mitigation Braking System (CMBS) may incorrectly interpret certain roadside objects such as metal fences or metal guardrails as obstacles and unexpectedly apply the brakes. CONSEQUENCE: If the CMBS unexpectedly applies emergency braking force while driving, there is an increased risk of a crash. REMEDY: Honda will notify owners, and dealers will update the CMBS software, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Acura customer service at 1-800-382-2238. Honda's numbers for this recall is JQ4, JQ5 and JQ6. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.