06 Acura Tl Sedan, 6 Speed Manual With Comfortable Leather Seating & Sunroof! on 2040-cars

Auto blog

Honda expands Takata airbag recall to 5.4M units in the US

While Honda already announced plans to take its front driver's side Takata airbag inflator recall nationwide, the automaker has now officially reported on the number of affected vehicles and the specific models in need of repair. The expanded campaign covers an estimated 5.4 million units across the US, including those already being fixed under the previous regional actions. That number is an expansion of the five million units initially reported by NHTSA. The affected models under the nationwide recall are the 2001-2007 Accord with a four-cylinder engine, 2001-2002 Accord V6, 2001-2005 Civic, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2007 Pilot, 2006 Ridegline, 2003-2006 Acura MDX, 2002-2003 TL and 2002 CL. For customers who expressed concern about their vehicle's safety, Honda had already been replacing the inflators nationwide. It's possible for the inflators in these vehicles to rupture when inflating the airbag, spraying metal fragments at occupants. This problem has been blamed for at least five deaths worldwide and at least 139 reported injuries. In its statement, Honda said that it worked with Takata to test the recalled inflators in the original high-humidity recall regions, and there were no abnormal deployments in these evaluations. Honda will begin notifying owners by "over time," according to its statement. Priority will be put on the geographic areas with the highest risk of ruptures. Those in the original recall region were contacted in September. Earlier in December, Honda partnered with Autoliv to supply the automaker with replacement inflators for this campaign. Autoliv predicted it would take six months for deliveries to start. Takata also increased its production of substitute components. Scroll down to read the company's announcement of this nationwide expansion. Statement by American Honda Regarding National Safety Improvement Campaign: Driver's Front Airbag Inflator Supplied by Takata Dec 8, 2014 - TORRANCE, Calif. Honda will voluntarily expand a regional Safety Improvement Campaign initiated in June 2014 (NHTSA No. 14V-351) into a national Safety Improvement Campaign affecting certain 2001 through 2011 Honda and Acura vehicles in the United States to replace the driver frontal airbag inflator, free of charge. Honda is expanding this Safety Improvement Campaign to address concerns raised by its customers whose vehicles were not included in the regional campaign.

Honda marks 20 million vehicles made in the USA

Japanese automakers manufacturing in the United States is nothing new. But it was in November of 1982 when the first Honda Accord rolled off the assembly line in Marysville, OH. It was the first Japanese vehicle assembled in the US, and in the nearly 32 years since, Honda has made 10 million Accords here for a total of 20 million cars manufactured in America - enough to span from New York to San Francisco twenty times. It's that double landmark which Honda is now celebrating.
Honda has come a long way in those three decades, keeping that original plant in Marysville on line while expanding to three more - in East Liberty, OH; Lincoln, AL; and Greensburg, IN - with a fifth plant (the Performance Manufacturing Center) opening on the same site in Marysville to build the Acura NSX next year. It also builds engines in Lincoln and in Anna, OH, and automatic transmissions at Russells Point, OH, and Tallapoosa, GA.
Between those seven sites, Honda produces 11 different models, including the Accord, Civic, Crosstour, CR-V, Pilot, Odyssey and Ridgeline as well as the Acura ILX, TL, RDX and MDX. Production keeps on ramping up as Honda produced a record 1.3 million vehicles in the US last year, 95 percent of which are sold in the US. Scope out the details in the press release below and click the image above to see it all laid out in a handy infographic.

Acura NSX will use Cosworth block, plus other neat tidbits

The blue NSX you see here was built just two weeks ago. Prototype number six, it rolled off Acura's newest assembly line in Ohio and was rushed out to the Monterey peninsula for various car week activities. We had a chance to sit down with several members of the NSX team to discuss the car, the long road from concept to production, and some interesting details. Below are some choice bits from our conversations. Acura is pretty proud of the fact that NSX version 2.0 was designed and is being built in the US. The new assembly line, called the Performance Manufacturing Center, is in Honda's hometown of Marysville, Ohio. While the line is brand new, the building has seen many uses over its lifetime, most recently as a warehouse facility. PMC staff numbers about 100, with 60 technical and 40 non-technical associates. The car uses parts sourced globally, and one of those sources is Cosworth. The engine blocks and heads come from the English firm and get assembled into twin-turbo powerhouses at Honda's nearby Anna, Ohio, engine plant. The Cosworth name is rarely associated with a bad engine, so we were geeked to hear the NSX's 550-plus-horsepower hybrid powertrain has good genes. Acura hasn't decided how many cars will come to the US each year, but supplies will be limited. We're told there is a total figure for global sales – basically anywhere Honda and Acura vehicles are sold – but they're not ready to divulge that number. Dealer allocation is also yet to be sorted out, although we're told that any dealer that has the necessary tools and equipment to service the new NSX will be able to sell them. Acura currently has 272 US dealers. The switch from the transverse engine originally planned to a longitudinal twin-turbo engine threw everyone involved for a loop. The designers had to lengthen their nearly finalized design, and the engineers working on the production process had to revise or redo much of their work. Though we've been waiting a while for the car since the concept first surfaced in 2012, it's pretty amazing to think that the car was engineered one and a half times and a new factory was built in about three years. But yeah, it's delayed, with series production now set to commence in the spring of 2016. One result of the switch to a longitudinal engine is a transmission hump in the cargo area aft of the engine. The hold is still sized to fit a bag of golf clubs, though it will be a tight fit.